Ras2733kqo Parts

This white thermostat control knob fits the oven temperature control. It fits onto the thermostat shaft so you can select temperature settings. Replace a knob that is cracked, stripped, loose, or missing to restore normal control and a clean, matched look.

• Mounts to the oven thermostat shaft to select temperature settings
• Fixes issues like cracking, stripping, wobbling, or falling off
• Helps when markings are worn or the knob no longer turns the control
• Restores the original look of the control panel

• Turn all controls OFF and let the appliance cool before replacing the knob
• Align the flat/D-shaped shaft with the knob insert and press straight on—do not force
• Verify the pointer aligns with the panel's temperature markings
• If replacing multiple knobs, match each knob to its specific control

The Receptacle Clip is an OEM part for GE electric ranges. As an essential safety component, it holds the three-prong power cord firmly in place at the rear of the appliance. 

Causes of a bad receptacle clip can include wear over many use and cleaning cycles that degrade the clip material, or physical damage from impact or forced removal of the power cord.

Symptoms include: 

• The power cord no longer feels securely fastened
• Visible cracks or splits in the clip housing
• Signs of discoloration/melting near the connection point
• Intermittent or shock issues when plugged in

This GE replacement clip restores a tight-fitting receptacle to maintain reliable range operation. Compatible with Hotpoint, RCA, and some Kenmore models as well, replacing yours prevents potential electrical hazards before they develop.
 

This is the white surface burner control knob that mounts on the range's infinite switch shaft. It lets you turn the surface element on and adjust heat levels, restoring accurate, easy temperature control when a knob is worn or broken.

• Controls a surface element by turning the infinite switch from Off through multiple heat settings
• Common failure signs: cracked or stripped knob, knob won't turn the switch, loose fit, or missing knob
• Color: white to match compatible white control panels
• Fits the switch shaft style designed for this knob's insert

• Disconnect power before replacing the knob
• Pull the old knob straight off the switch shaft; align the new knob with the shaft flat before pushing on
• Do not force—misalignment can damage the knob insert or switch
• Test each heat setting after installation

This small retainer secures the surface element receptacle in a range or cooktop so the element plugs in straight and stays seated. Replacing a bent or missing clip helps restore a stable, reliable connection.

• Holds the surface element receptacle firmly to the cooktop or bracket
• Keeps the element plug aligned and fully seated
• Helps prevent arcing, heat damage, and intermittent burner performance from a loose receptacle
• Useful when the element feels wobbly or the receptacle shifts during use

• Disconnect power before servicing
• Lift the cooktop or access panel to reach the receptacle area
• Support the receptacle, release the old clip, and snap the new clip into place
• Ensure the receptacle is secure and aligned before reinstalling the element

An infinite switch regulates power to a range or cooktop surface element for smooth, variable heat control. Replacing a worn switch restores accurate low-to-high settings and dependable on/off operation for the burner.

• Controls the cycling of power to a surface element based on the knob setting
• Common symptoms of failure: burner won't heat, only heats on high, won't turn off, or temperature can't be adjusted
• Can also cause intermittent heating or an unresponsive/loose-feeling knob if the shaft is damaged

• Disconnect power at the breaker before servicing; high voltage is present
• Access the control area, label/photograph wiring, and transfer leads one at a time to the matching terminals on the new switch
• Mount the switch securely, align the shaft with the knob, and reassemble the panel
• Test the burner through low, medium, and high settings to ensure proper operation

Replace a worn or broken oven door handle to restore a secure, comfortable grip and a clean, finished look. This handle lets you open and close the oven safely when the original is loose, cracked, or missing.

• Provides a sturdy pull point for opening and closing the oven door
• Replaces handles that are loose, wobbly, cracked, or broken
• Restores proper feel and appearance of the door
• Helps reduce risk of slips when grasping a damaged handle

• Disconnect power before servicing; shut off gas
• Support the door and protect the glass/finish while working
• Many models require removing the door and the handle screws/end caps to swap the handle
• Tighten mounting hardware evenly; do not overtighten

This infinite switch controls the heat output of a stove's electric surface element, restoring precise temperature adjustment for cooking. It replaces a worn or failed burner control to regain variable heat settings. What it does:

• Regulates power to an electric cooktop surface element, allowing variable heat levels
• Replaces a faulty control that causes a burner to stay off, stay on, or not change heat settings
• Stops intermittent heating, no-click conditions, or elements that only run at full or low power
• Works with standard knob-style controls

• One infinite switch assembly

• Disconnect power at the breaker before starting any repair to avoid shock
• Remove the knob and console or back panel to access the switch; handle wiring gently
• Match the part number on the switch to your original before installing

This bail is the replacement door/handle support used to secure a handle or attach components to an appliance door or panel. It restores a stable grip and proper attachment when the original bail is cracked, bent, or missing. What it does

• Replaces a worn, broken, or missing bail that supports a door handle or accessory
• Restores a secure connection so the handle or component doesn't wobble or detach
• Helps prevent further damage from a loose or improperly supported handle
• Fits into the existing mounting points to re-establish proper alignment

• One replacement bail

• Disconnect power and remove any removable panels or doors before starting
• Use basic hand tools; retain original screws and fasteners unless damaged
• Align bail with existing mounting holes and secure without over-tightening

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

This silicon controlled rectifier (SCR) switches and regulates power to heating elements and motors in compatible appliances, restoring controlled current flow for proper operation. It's a direct-replacement electronic switching component. What it does:

• Acts as a solid-state switch to control AC power to heater or motor circuits
• Helps regulate current during timed or thermostatic cycles
• Common replacement when appliance shows intermittent heating, no heat, or erratic motor control
• Replaces a failed/shorted SCR that can cause blown fuses or control board errors

• One silicon controlled rectifier (single SCR)

• Intended for technicians or experienced DIYers; disconnect power before servicing
• Verify correct SCR orientation and secure the 8-32 screw terminal; avoid overtightening
• Observe ESD precautions and handle the part by non-conductive areas

This replacement screw fastens appliance components to restore secure fit and reduce vibration or panel movement. Simple, direct replacement for a missing or stripped fastener to help maintain proper assembly and operation. What it does:

• Secures panels, brackets or trim to keep parts aligned and prevent rattling
• Restores mounting where a lost or damaged screw causes loose or sagging components
• Helps maintain electrical and mechanical connections by keeping parts properly seated
• Small hardware solution for cosmetic and functional stability

• Use the correct sized screwdriver or driver bit to avoid stripping the head
• Inspect mating threads and replace if damaged; do not force a stripped screw
• Tighten until snug — avoid over-tightening which can crack plastic or strip threads
• If accessing areas near power or controls, disconnect appliance power first and follow all safety precautions

This wire clip secures a wiring harness to the appliance cabinet to prevent rubbing, pinching, or loose connections. Replacing a worn or broken clip helps restore proper wire routing and reduces the risk of electrical contact issues. What it does:

• Holds wiring harnesses in place to prevent chafing and stress on connections
• Keeps wires routed away from sharp edges, moving parts, and heat sources
• Helps stop intermittent electrical problems caused by loose or strained wires
• Reduces risk of arcing or shorting from wires rubbing on metal components

• One wire clip

• Always disconnect power (unplug or switch off circuit breaker) before servicing electrical components
• Remove any panels or obstructions to access the damaged clip, then release the harness and snap the replacement clip into the original mounting location
• Verify wires are seated properly in the clip and routed clear of moving or hot parts before restoring power
• If wiring or connectors are damaged, replace or repair those components rather than relying on the clip alone

This replacement screw secures appliance components and helps keep panels, brackets, and controls firmly attached for reliable operation. It's a simple, direct fix when a mounting screw is missing, loose, or stripped. What it does:

• Fastens panels, trim, brackets or electrical components to reduce movement and rattling.
• Restores proper alignment of parts that shift when a screw is missing or worn.
• Helps maintain electrical and mechanical connections by keeping components seated.
• Common symptom: loose or vibrating panels, trim gaps, or visibly missing hardware.

• Disconnect power to the appliance before accessing internal components.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Thread gently and avoid overtightening to prevent stripping the mating threads or cracking surrounding parts.
• Keep any removed hardware organized to ensure placement of all required fasteners during reassembly.

This is a replacement 8-18 x 5/16 machine screw used to secure appliance panels and components. It restores proper fastener fit so parts stay mounted and operate safely. What it does:

• Fastens panels, brackets, and small components where an 8-18 x 5/16 screw is specified
• Prevents loose parts, rattling, and misalignment caused by missing or worn screws
• Provides the correct thread size and length for reliable reattachment
• Works wherever the OEM calls for this specific 8-18 x 5/16 screw

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to threads or mounting surfaces
• If replacing multiple fasteners, use matching screws to maintain proper fit and function

This is a replacement mounting screw for the refrigerator/freezer thermostat assembly. It secures the thermostat to the cabinet so temperature sensing and control remain stable and reliable. What it does:

• Secures the thermostat housing or bracket to the appliance cabinet
• Keeps the thermostat properly positioned for accurate temperature sensing
• Common fix when a loose, missing, or stripped thermostat fastener causes rattling or poor contact
• Small hardware part used during thermostat replacement or reassembly

• One thermostat mounting screw

• Turn off power to the appliance before starting any repair
• Use appropriate screwdriver and do not overtighten to avoid stripping the housing or threads
• If original hole or threads are damaged, inspect bracket or cabinet and replace as needed

Package of 12