Rga720 Parts

This safety valve controls gas flow to the cooker's burner assembly, restoring regulated gas delivery for safe operation. It's a direct-replacement-style valve used when the oven or range won't heat or won't light properly. What it does:

• Regulates and permits gas flow to the burner when the oven/range calls for heat.
• Can address symptoms such as burners or oven failing to ignite, inconsistent heating, or loss of burner control.
• Designed to work with the appliance's existing gas line and valve mounting points.
• Acts as a replacement component (one-for-one swap) for the original valve assembly.

• Turn off gas supply and disconnect power before inspecting or replacing the valve.
• Replacement may require basic gas-line fittings; follow the appliance manufacturer's installation instructions.
• After installation, test all gas connections for leaks and verify proper operation per local codes.

This is a replacement mounting screw for the refrigerator/freezer thermostat assembly. It secures the thermostat to the cabinet so temperature sensing and control remain stable and reliable. What it does:

• Secures the thermostat housing or bracket to the appliance cabinet
• Keeps the thermostat properly positioned for accurate temperature sensing
• Common fix when a loose, missing, or stripped thermostat fastener causes rattling or poor contact
• Small hardware part used during thermostat replacement or reassembly

• One thermostat mounting screw

• Turn off power to the appliance before starting any repair
• Use appropriate screwdriver and do not overtighten to avoid stripping the housing or threads
• If original hole or threads are damaged, inspect bracket or cabinet and replace as needed

This broiler pan grid is the oven rack insert that holds food above the broil pan to promote even browning and let drippings fall away. It restores broiling performance for ovens using a two-piece broil pan set. What it does:

• Supports meats and vegetables during broiling so heat circulates around food for better sear and browning
• Allows drippings to fall into the lower broil pan to reduce smoke and flare-ups
• Replaces a missing, warped, or damaged grid that can cause uneven cooking or food slipping through
• Fits into the matching broil pan to restore original broiling configuration

• Ensure oven is off and grid has cooled before handling or installing
• Place grid into the broil pan with grid edges seated securely in the pan
• Clean after use with warm, soapy water; avoid harsh abrasives that can damage the finish

A replacement cooktop grate assembly that supports cookware and restores a level cooking surface. Designed to fit directly on the cooktop so pots and pans sit securely and heat evenly. What it does:

• Supports cookware over the burner for safe, stable cooking
• Replaces broken, warped, or missing grates that cause wobbling
• Helps maintain correct pot-to-flame placement for even heating
• Reduces risk of cookware sliding or tipping while cooking

• Allow cooktop and burners to cool completely before handling.
• Remove old grate and set the new grate into position; no special tools typically required.
• Inspect burner caps and ignition ports for debris before use.
• Use non-abrasive cleaners and avoid dropping or striking the grate to prevent damage.

This oven burner assembly replaces a worn or damaged bake burner to restore reliable oven heating for gas ranges. Designed as a direct-fit assembly, it provides the burner tube and components needed for ignition and even baking performance. What it does

• Supplies the main bake flame for the oven cavity so the oven reaches and maintains cooking temperatures.
• Replaces cracked or corroded burner tubes that cause weak or no flame.
• Helps correct uneven heating or poor baking results linked to burner damage.
• Works with existing ignition and gas valve systems when properly installed.

• One complete oven burner assembly.

• Turn off gas supply and electrical power before beginning any service.
• Handle the burner and igniter carefully; avoid bending or damaging the tube or orifices.

This cable clamp secures the appliance power cord where it enters the cabinet, protecting wiring from pull and chafe for safer, more reliable operation. Designed to hold the cord firmly in place and prevent accidental disconnection. What it does:

• Acts as a strain relief to prevent the power cord from pulling into or away from the appliance
• Protects wiring from abrasion and sharp edges at the entry point
• Helps maintain a secure electrical connection to reduce intermittent power issues
• Commonly used where the cord passes through a rear or bottom access panel

• Disconnect power before inspecting or replacing the clamp to avoid shock or injury
• Install at the cord entry so the clamp captures the cord jacket; tighten fastener securely but do not over-torque
• Verify the cord is correctly routed and not pinched when reassembling panels
• If any wiring or the cord jacket is damaged, replace the cord before restoring power

Replacement cooktop guide that positions and supports the cooktop glass so the top sits level and secure. Restores proper alignment to reduce movement and uneven gaps around the cooktop edge for safer, more stable use. What it does:

• Aligns and stabilizes the cooktop glass to keep it seated correctly in the range cutout
• Helps prevent the cooktop from shifting, rubbing against trim, or vibrating during use
• Commonly replaced when the glass feels loose, sits unevenly, or the edge shows wear
• Supports a flush fit to help avoid chipping or damage where the glass meets the cabinet

• Disconnect electrical power (and gas supply if applicable) before servicing and wear cut-resistant gloves when handling the glass top
• Lift or remove the cooktop per the appliance service instructions to access and replace the guide
• Install the new guide, re-seat the cooktop, and verify the top sits flush and does not move; do not overtighten fasteners
• If the glass top is cracked or damaged, replace the glass top before reinstalling guides

This right rear burner tube assembly routes gas from the manifold to the right-rear burner on compatible gas ranges, restoring proper fuel flow and stable burner operation. What it does:

• Directs gas to the right-rear surface burner so the burner can light and maintain a steady flame
• Replaces a bent, clogged, or corroded tube that can cause weak or uneven flames
• Helps eliminate burner misfires or no-light conditions when tube damage or obstruction is the cause
• When damaged or loose, can contribute to gas odor or leaking — replacing a compromised tube restores safe, correct routing

• Turn off the range's gas supply and electrical power before beginning work
• Verify correct tube alignment on the manifold and burner adapter; avoid overtightening fittings
• Check for gas leaks after installation using a soap-and-water solution or a gas leak detector