Rm778px5 Parts

This time-delay fuse protects the appliance's power circuit by opening when current exceeds a safe level while tolerating brief inrush current. Replacing a blown fuse can help restore power once the root cause is corrected. What it does:

• Protects the line and control circuits from shorts and overloads
• Time-delay design helps prevent nuisance opening during startup surges
• When open, the unit will be completely dead—no display, lights, or response
• Repeatedly opening usually indicates an unresolved electrical fault that needs diagnosis

• 1 time-delay fuse

• Disconnect power at the breaker before servicing; some appliances can retain dangerous high voltage
• Replace only with the same type and rating specified by the manufacturer
• Inspect the fuse holder and wiring for heat damage or loose connections before reassembly
• If the new fuse opens immediately, stop and diagnose the underlying cause; never bypass or upsize a fuse

This selector switch escutcheon is the black trim plate that fits around the control knob on the console. It restores a clean, finished look and proper alignment around the switch when the original bezel is cracked, missing, or faded.

• Finishes the opening around the selector switch and protects the panel edges
• Helps the control area look clean and aligned with the knob
• Replace when the bezel is cracked, warped, missing, or discolored
• Cosmetic component; the switch itself may be faulty

• Disconnect power before servicing
• Pull the control knob straight off the switch shaft
• Release tabs or remove screws (as applicable), lift off the old escutcheon, and align/install the new one
• Reinstall the knob and restore power; verify smooth knob movement

Size: 10-32 inch.

Almond. Size: 13 oz. can. Acrylic appliance paint.

Color: Almond

This small button fits into the microwave door handle to cover the mounting screw opening, restoring a clean, factory look. Replace a missing or damaged button to refresh appearance and help keep the handle area tidy.

• Covers the handle's mounting screw opening for a finished appearance
• Helps keep debris out of the handle cavity
• Replaces a lost, cracked, or discolored button
• Common signs include a missing cap, visible screw, or a loose/broken button

• Disconnect power before servicing any microwave
• Gently pry out the old button; avoid scratching the handle—use a plastic tool if needed
• Align the new button with the opening and press until fully seated
• If your model requires door disassembly, microwaves can retain high voltage.

Color: White. Size: 2 oz. can. Porcelain touch-up paint.

Screw: 8-16 x 3/8 inch.

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

White support rack that secures a dishwasher rack to its track, keeping the rack aligned for smooth sliding and safer loading. Replaces broken or worn supports to restore proper rack function and stability. What it does:

• Holds the dishwasher rack in place so it slides smoothly and stays level.
• Prevents the rack from slipping, leaning, or falling during loading and unloading.
• Reduces noise and wobbling caused by damaged or missing rack supports.
• Restores proper rack alignment for consistent wash performance and safe loading.

• Disconnect power to the appliance before starting any repair; follow all safety precautions.
• Remove the affected rack to access the support; inspect adjacent clips or tracks for damage.
• Align the support with the rack/track and snap or secure it into place; confirm the rack slides and sits level.

Bottle with brush. Color: Platinum. Size: 0.6 fl.oz.

The thermostat bulb clip is an OEM component specifically designed for Whirlpool drop-in electric ranges, securely fastening the thermostat sensor bulb. This clip features corrosion-resistant spring coils and precision tips.  

Symptoms of a bad thermostat bulb clip include:  

• Dangling thermostat bulb
• Temperatures inside oven might be incorrect because sensor bulb is not mounted correctly.

Causes of failure involve metal fatigue weakening the thermostat bulb clip over years of expansion and contraction during heating, worn surfaces losing grip, or damaged barbs failing to anchor the thermostat bulb.

Replace yours today with this genuine OEM Whirlpool clip. Compatible with Jenn-Air, GE, and select Kenmore appliances, reinforced coils maintain constant tension assuring safety. Reliable glass retention enhances interior illumination for tasks.

This stirrer drive belt transfers motor power to the stirrer assembly so the stirrer can rotate properly. It replaces a worn or broken belt to restore consistent stirrer movement and reduce slipping or noise. What it does

• Transfers torque from the motor to the stirrer shaft to enable rotation
• Commonly used when the stirrer stops turning, slips, or rotates intermittently
• Helps restore even operation and proper circulation tied to the stirrer function

• One stirrer drive belt

• Disconnect power to the appliance before starting any repair
• Inspect pulleys and the stirrer assembly for damage and alignment before installing the new belt
• Route the belt per the OEM layout and ensure proper tension; replace damaged components as needed

This latch knob screw secures the latch knob to its shaft on compatible appliances. Replace a missing, stripped, or rusted screw to restore a firm, reliable attachment and proper latch/knob operation. What it does:

• Attaches the latch knob securely to the latch mechanism/shaft
• Helps maintain proper door latch engagement and knob control
• Common fix for a loose, wobbly, or falling-off knob
• Replaces a lost, corroded, or cross-threaded screw

• 1 latch knob screw

• Disconnect power and allow the appliance to cool completely before servicing
• Align the knob on the shaft and start the screw by hand to avoid cross-threading
• Tighten with the correct screwdriver; do not overtighten to prevent damage
• The latch engages and releases smoothly after installation

This ground screw secures the appliance grounding conductor to the chassis for a reliable electrical ground connection, helping maintain safety and proper operation. It's a direct-fit fastener used where a dedicated ground screw is required. What it does

• Fastens the grounding conductor to the appliance frame to maintain a secure earth/ground connection.
• Helps prevent electrical shock and reduces risk of stray voltage on the chassis.
• Addresses symptoms like intermittent or absent grounding and loose or corroded ground connections.
• Used wherever the original equipment grounding screw has been lost, damaged, or corroded.

• Disconnect power at the breaker and unplug the appliance before starting any work.
• Only attach to designated grounding points on the chassis; ensure the mating surface is clean and free of paint or corrosion.
• Use the correct driver and moderate hand torque—do not overtighten to avoid stripping threads.

Color: Citrine white. Size: 4.5 oz. can. Acrylic appliance aerosol can spray paint.