Rs21kpms Parts

Size: 8-32 x .312 inch.

This heater and thermostat assembly provides the heating element and temperature control needed to restore proper heat generation and regulation. It replaces the heater/thermostat module to help return normal drying and temperature performance. What it does:

• Produces heat and works with the thermostat to regulate operating temperature
• Replaces a failed or damaged heating element and/or thermostat assembly
• Addresses symptoms like no heat, weak heat, or inconsistent drying cycles
• Restores safe temperature control to prevent overheating when working properly

• One heater and thermostat assembly

• Disconnect power before starting work
• Allow the appliance to fully cool and use proper tools to avoid damage
• Follow OEM instructions and verify wiring/terminals match before reconnecting power
• Test the appliance in a short cycle after installation to confirm proper operation

This seal strip replaces a worn or damaged door gasket edge to restore a proper seal and help the appliance maintain temperature and operate quietly. It's a direct-fit service part used where a continuous seal is required. What it does:

• Provides a flexible barrier along the door/frame to reduce air leaks and heat/cold loss
• Helps prevent moisture buildup and improves energy efficiency when sealing is restored
• Reduces rattling and vibration caused by a compressed or torn seal edge
• Commonly replaced when the strip is torn, missing, or no longer adheres properly

• One seal strip

• Disconnect power to the appliance before servicing to avoid electrical or burn hazards
• Clean and dry the mounting surface; remove old adhesive or residue for best adhesion
• Align the strip carefully and press firmly; allow any adhesive to cure per manufacturer instructions

This cover assembly for the air return guides airflow and protects the return opening from debris so the appliance runs more reliably. It restores correct air pathing and helps maintain normal drying/cooling performance. What it does:

• Directs and protects the air return opening to maintain proper airflow
• Helps prevent lint, dust, and debris from entering sensitive internal components
• Can reduce abnormal noise caused by loose or missing return covers
• Restores designed airflow behavior that supports efficient operation

• Disconnect power to the appliance before starting any work
• Remove exterior panels as needed to access the air return and retain fasteners for reassembly
• Inspect surrounding seals and ducts; replace damaged parts to ensure proper airflow

This is a replacement hex nut used to secure appliance components and fasteners. It restores a tight, reliable connection where a worn or missing nut causes loose panels, trim, or bracketing. What it does:

• Secures threaded studs, bolts, or fasteners to keep panels and components in place
• Restores proper fastening when original nut is stripped, corroded, or lost
• Helps eliminate rattling, vibration, or loose parts caused by a missing/failed nut
• Compatible with the appliance locations that use a standard hex nut for mounting

• Turn off and unplug the appliance before accessing interior panels or fasteners
• Use the correct wrench or socket size to avoid rounding the nut
• Replace only like-for-like nuts; if thread damage is present, inspect and replace the mating bolt/stud as needed

This ball sleeve guides and supports the valve ball inside the water/dispensing assembly to help maintain a proper seal and smooth movement. Replacing a worn sleeve restores reliable valve operation and reduces intermittent leaks or flow issues. What it does:

• Positions and protects the valve ball for consistent seating and sealing
• Prevents wear between the ball and valve bore to maintain proper flow control
• Helps stop dripping, leaking, or inconsistent dispensing caused by a damaged sleeve
• Works as the mating surface for the ball to ensure smooth operation

• One ball sleeve

• Disconnect power and water supply before starting any repair
• Replace only with the correct part number to ensure proper fit and seal
• Inspect surrounding valve components and seals; replace if worn or damaged
• Test for leaks and proper operation after reassembly

A replacement door gasket that restores a tight seal around the oven door to help maintain proper cooking temperature and improve efficiency. Fits Whirlpool ovens and ranges that use part A3189394. What it does

• Seals the oven cavity to reduce heat loss and help maintain consistent cooking temperatures.
• Helps prevent heat from escaping around the door, improving energy use and cook results.
• Worn, torn, or flattened gaskets can cause uneven baking or longer cook times.
• Replacing a damaged gasket can reduce hot spots on the exterior and nearby cabinetry.

• Disconnect power and ensure the oven is completely cool before starting.
• Remove the old gasket by pulling it out of the door channel; clean the channel before installing the new gasket.
• Press the new gasket into the channel around the full perimeter, working from one corner and ensuring an even fit.

This replacement bracket secures the refrigerator ice maker assembly so it stays properly positioned for reliable ice production. It restores stable mounting and helps prevent the ice maker from shifting or coming loose. What it does:

• Holds the ice maker assembly in place on the freezer liner or mounting frame
• Keeps the ice maker aligned for proper operation and water fill
• Helps stop vibration or movement that can cause noisy operation or misfeeds
• Useful when the original bracket is bent, broken, or missing

• Disconnect power to the refrigerator and shut off the water supply before starting
• Remove the ice maker to access the bracket mounting screws
• Reuse existing screws if undamaged; tighten to secure but avoid overtightening
• If mounting points or surrounding plastic are damaged, replace or repair before reinstalling

This mechanical rotary defrost timer controls and advances the refrigerator's defrost cycle so the evaporator periodically melts frost buildup, helping restore normal cooling. It replaces a worn or stuck timer to return automatic defrost operation. What it does

• Advances the fridge's defrost cycle on a set schedule so the evaporator heats and melts frost
• Stops the compressor during defrost so frost is removed without cooling loss
• Common symptom: excessive frost buildup on evaporator or freezer compartment
• Common symptom: refrigerator or freezer runs constantly or does not cool properly

• One defrost timer (rotary)

• Disconnect power to the appliance before starting any repair
• Locate timer (control panel, kick plate, or rear panel depending on model) and note original orientation before removal
• Remove mounting screws and electrical connector(s); install new timer in the same position and reconnect wiring

This handle insert is a molded trim piece that restores a clean finished look and covers the handle channel. It replaces a cracked, faded or missing insert to help the appliance door look and function like new. What it does:

• Replaces a damaged or discolored handle insert for a seamless appearance
• Covers the handle mounting area to prevent dirt buildup and snagging
• Helps keep the door handle looking uniform with matching trim
• Compatible with models that use the same style white handle insert

• Disconnect power or unplug the appliance before starting any work
• Remove the handle or access panel per your model's instructions to access the insert
• Align the insert into the handle channel and snap or secure it in place with the original fasteners
• If clips or fasteners are damaged, replace them to ensure a secure fit

This mold heater assembly warms the ice maker mold to help release ice and prevent ice buildup for consistent ice production. It replaces a faulty heater that can cause stuck cubes or irregular harvesting. What it does:

• Gently warms the ice mold so ice cubes release cleanly from the tray
• Helps prevent ice from sticking or freezing unevenly to the mold
• Supports regular ice harvesting cycles when heater has failed or is intermittent
• Works as the heater component inside the ice maker housing

• One mold heater assembly

• Disconnect power to the appliance before attempting any service
• Accessible from the ice maker module area; some models require removing the ice bin or access panel
• Handle the heater and surrounding components carefully to avoid damage to the ice maker

This condenser fan motor circulates air across the condenser coils so your refrigerator can shed heat efficiently. Replaces a failed motor to restore normal cooling performance and reduce compressor run time. What it does:

• Spins the condenser fan blade to move air across condenser coils for proper heat dissipation
• Helps maintain correct compressor temperature and overall cooling efficiency
• Common symptom: fan does not run or is noisy, causing the refrigerator to run continuously or run warm
• Prevents overheating of the compressor and reduces frost or icing related to poor condenser airflow

• Disconnect power to the appliance before starting any work
• Access typically requires removing the lower rear or front access panel; support the unit as needed
• Handle condenser fins and wiring carefully; avoid bending fins or pinching wires
• Verify electrical connector, shaft orientation, and mounting bracket alignment before final assembly