Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fixes corroded or broken wiring causing motor failure. Connects evaporator fan motor to electrical system. Moderate DIY repair, requires panel removal.
Changed the evaporator fan cover. I was told it comes with the fan motor and it did not so I had to order a fan motor. Then I found the fan wire harness was corroded and broken. I also installed an aluminum tab on the heater element that extends down the drain hole. I also had to clean the back of the fridge and unclog the two drain tubes on the back of the fridge next to the compressor and now it works fine. PS- use a small open end wrench to push the fan blade off the old fan. Read more
Tapping screw for refrigerator assembly and panel mounting. Replace when stripped, missing, or damaged during repairs or cabinet disassembly.
Refrigerator door hinge shim installs between hinge and cabinet to correct door alignment. Replace if worn, cracked, or missing to level door properly.
Fix refrigerator icing up or water leaking from door. This water tank heater prevents freezing in the tank. Test with multimeter for continuity.
Getting to the drain heater really wasn't so bad. The problem was waiting for the ice to defrost so that I could remove the back panel. Read more
Rubber grommet that secures the evaporator cover panel in your refrigerator. Replace if cracked, brittle, missing, or no longer holding cover firmly in place.
Initially called repair man and he checked it out , took about half of the freezer insides out to decide the fan was bad. Then he informed me that he did not have part and was going to be on vacation for a week. So I finished tearing apart the freezer to get to part removing the ice maker and rear panel, removed fan and ordered new parts, parts arrived as said and I put back together. Happy to say it is fixed. Read more
Replaces a cracked, leaking, or damaged water tank assembly in your refrigerator. Installs behind the crisper drawer to restore proper water storage.
Fix frost buildup on evaporator coils or warm fridge temps. This defrost thermostat regulates defrost cycle temperature. DIY-friendly, 20-30 min install.
I unplugged the unit. Let the evap thaw. Measured with an ohm meter the temp sensor, defrost sensor and evap heaters. Defrost sensor measured completely " closed". Put sensor into hot water and ice, the reading never changed. Ordered sensor from AP PROS, got the part extremely fast, installed part, freezer was making ice in an hour. I did a lot of online research, too. Thanks, AP PROS! Freezer only down 3 days. Fridge side working. Read more
Hex bolt for refrigerators. Secures internal components and structural panels. Replace if bolt is stripped, missing, or no longer holds parts tightly.
This is a small white bushing that fits around the solenoid in the ice dispenser auger motor assembly. It reduces friction and vibration, allowing the solenoid to operate smoothly when dispensing ice. Replace this bushing if you hear unusual rattling or buzzing from the dispenser area, or if the ice dispenser is not engaging properly.
Found a useful video from AppliancePartsPro. Once I got it apart I figured out what parts I needed. I was able to find the parts for my particular ice maker. Just now finished the repair and works like new again. Read more
Fixes refrigerant flow issues and moisture buildup in cooling system. This filter dryer removes moisture and contaminants from refrigerant lines.
Seals refrigerator door to prevent cold air leaks and maintain temperature. Replace if torn, cracked, or not sealing properly. Verify fit with model number.
This is a hose connector fitting used in the refrigerator's water supply system. It connects water tubing sections to ensure a secure, leak-free path for water flow to the dispenser or ice maker. Replace this fitting if you notice water leaking behind or underneath the refrigerator near the water line connections.
This tapping screw secures internal components in your refrigerator. Replace if stripped, missing, or damaged during repairs to restore proper assembly.
Connects water supply lines in your refrigerator. Replace if cracked, leaking, or damaged during moves. Installs between tubes for secure connections.
Easily removed top cover, to access water tube to door. Simply slip off old connector while keeping ring in. The new one is even easier, just push hoses in. Read more
Secures temperature sensor in place for accurate refrigeration control. Replace if sensor is loose or temperature regulation is inconsistent. Verify fit.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.