Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fridge light won't turn off or stays dark? This door switch detects when the door opens/closes to control interior lighting. Easy 2-minute DIY fix.
Purchased new evaporator/heater/sensor assembly from appliance parts. Removed new heater, sensor and wire harness from new assembly and from existing unit in refrig section. Then installed new heater and sensor on old refrig evaporator, avoiding complex soldering and recharge with Freon. Once repaired all failure indications cleared and refrigerator section performing like new. Also purchased new heater for water tank and several broken plastic parts that went in in 2 minutes. Changed door... Read more
Rubber grommet that secures the evaporator cover panel in your refrigerator. Replace if cracked, brittle, missing, or no longer holding cover firmly in place.
Initially called repair man and he checked it out , took about half of the freezer insides out to decide the fan was bad. Then he informed me that he did not have part and was going to be on vacation for a week. So I finished tearing apart the freezer to get to part removing the ice maker and rear panel, removed fan and ordered new parts, parts arrived as said and I put back together. Happy to say it is fixed. Read more
Fixes corroded or broken wiring causing motor failure. Connects evaporator fan motor to electrical system. Moderate DIY repair, requires panel removal.
Changed the evaporator fan cover. I was told it comes with the fan motor and it did not so I had to order a fan motor. Then I found the fan wire harness was corroded and broken. I also installed an aluminum tab on the heater element that extends down the drain hole. I also had to clean the back of the fridge and unclog the two drain tubes on the back of the fridge next to the compressor and now it works fine. PS- use a small open end wrench to push the fan blade off the old fan. Read more
Replace your refrigerator's E27 light bulb socket holder to restore interior lighting. Fits standard incandescent or LED bulbs. Confirm fit with your model.
Water pooling under crisper drawers? A cracked or leaking water tank assembly often causes this issue. Moderately easy DIY repair in under an hour.
I replaced the leaking water tank, and with the help of the video as my guide, it showed the steps needed to replace the tank in an easy to understand manner. Even though in the step by step video they used a different make and model fridge, my Samsung had all the parts and fittings in all the same places just like the GE model in the video. So all in all, it was an easy fix that took less than an hour. Read more
This is a small white bushing that fits around the solenoid in the ice dispenser auger motor assembly. It reduces friction and vibration, allowing the solenoid to operate smoothly when dispensing ice. Replace this bushing if you hear unusual rattling or buzzing from the dispenser area, or if the ice dispenser is not engaging properly.
Found a useful video from AppliancePartsPro. Once I got it apart I figured out what parts I needed. I was able to find the parts for my particular ice maker. Just now finished the repair and works like new again. Read more
Fix doors that won't close properly or align correctly with this refrigerator cam riser. Supports door mechanism components for smooth operation.
Fix frost buildup on evaporator coils or warm fridge temps. This defrost thermostat regulates defrost cycle temperature. DIY-friendly, 20-30 min install.
I unplugged the unit. Let the evap thaw. Measured with an ohm meter the temp sensor, defrost sensor and evap heaters. Defrost sensor measured completely " closed". Put sensor into hot water and ice, the reading never changed. Ordered sensor from AP PROS, got the part extremely fast, installed part, freezer was making ice in an hour. I did a lot of online research, too. Thanks, AP PROS! Freezer only down 3 days. Fridge side working. Read more
Replace your broken or cracked refrigerator door handle. This handle installs on the exterior door and restores grip and access to your appliance.
Fix it myself Read more
Connects water supply lines in your refrigerator. Replace if cracked, leaking, or damaged during moves. Installs between tubes for secure connections.
Easily removed top cover, to access water tube to door. Simply slip off old connector while keeping ring in. The new one is even easier, just push hoses in. Read more
Secures temperature sensor in place for accurate refrigeration control. Replace if sensor is loose or temperature regulation is inconsistent. Verify fit.
The Refrigerator Motor Cover Assembly is essential for maintaining the performance of your Samsung refrigerator. This cover protects the motor from dust, debris, and spills, ensuring your appliance runs smoothly and efficiently. Crafted as a genuine OEM part, it guarantees a perfect fit and reliable quality that matches your original components. Installing this cover is straightforward, allowing you to quickly restore your refrigeratorGÇÖs functionality without hassle. By safeguarding the motor, the Refrigerator Motor Cover Assembly helps extend the lifespan of your appliance, reducing the need for costly repairs. Compatible with a variety of Samsung refrigerator models, this cover offers peace of mind and enhances the overall durability of your fridge. Choose this genuine OEM part to maintain the optimal operation of your Samsung refrigerator and enjoy a dependable, long-lasting cooling solution.
I replaced the evap fan motor assembly after thawing out the evaporator. I replaced the evap motor assembly because i damaged it while defrosting the evaporator. Too much heat warped the fan blade and bracket. I replaced the motor because of the abnormal load it was put under when it was making all the noise from trying to spin through the ice buildup on the evaporator. This was all done on the fridge side. Read more
Fix ice dispensing issues or grinding noises with a new geared auger motor. This motor drives the auger system for proper ice delivery and circulation.
Installed new motor and used the propeller like part from old sheared shaft that rotates the shaft in the ice cub box that dispenses the ice. Read more
Motor not running or intermittent cooling? The motor wire harness connects electrical components to keep your refrigerator running smoothly. Moderate DIY repair.
Secures internal panels and components in your refrigerator. Replace if screw is stripped, missing, or no longer holding parts firmly in place.
Fix a frozen water reservoir causing no water flow to your dispenser. This heater maintains proper tank temperature. DIY repair with basic tools.
I TOOK A CONTINUITY READING ON DEFROST HEATER AND FOUND CIRCUIT WSA OPEN.REPLACED WITH NEW ONE AND SO FAR WORKING FINE Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.