Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Rubber grommet that secures and cushions the evaporator or condenser fan motor in your refrigerator. Replace if cracked, worn, or missing to stop vibration.
Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge. Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing. Read more
Ice dispenser only crushing or not dispensing? This solenoid valve controls ice flow and cube selection. DIY-friendly repair with video guide.
Replaced ice dispenser solenoid Read more
Refrigerator Fan Blade is a crucial component for ensuring your Samsung refrigerator operates efficiently. This genuine OEM part is designed to maintain optimal airflow within your appliance, promoting consistent cooling and preventing temperature fluctuations. By replacing a worn or damaged fan blade with this high-quality part, you can restore your fridgeGÇÖs performance, keeping your food fresh and extending the lifespan of your refrigerator. The fan blade is crafted with precision to ensure a perfect fit for a variety of Samsung refrigerator models, making installation straightforward and hassle-free. Its durable construction resists wear and tear, providing reliable performance even in demanding environments. Additionally, a properly functioning fan helps reduce energy consumption by allowing your refrigerator to run more smoothly. Whether youGÇÖre experiencing unusual noises, inadequate cooling, or need to replace a broken fan blade, the Refrigerator Fan Blade offers a dependable solution. Trust in this genuine OEM part to deliver the quality and performance you expect from your Samsung appliance, enhancing your overall kitchen experience.
Ordered the two motors plus ordered the fan blades since I was afraid one might break during replacement. Changed out without breaking Freezer and both ice makers now working fine Read more
Bypass cap allows your refrigerator to dispense water without a filter installed. Replace when using external filtration or RO systems. Confirm fit with your model.
Replaced water reservoir and water valve assembly. This corrected both problems. Before attempting this repair I used the Appliance Parts Forum for info on how to make these repairs. I had no idea where the valve and reservoir were located before I started. It became a very easy repair thanks to AppliancePartsPro.com. Read more
Replaces a damaged, frayed, or chewed refrigerator power cord. Connects your fridge to the wall outlet. Needed when the cord is broken or worn.
Replaced power cord with a new cord. Read more
Refrigerator light not turning on when door opens? The door switch detects door position to control interior lighting. Simple DIY replacement.
Secures the evaporator fan motor inside your refrigerator. Replace if cracked, warped, or broken to restore proper motor support and stability.
I replaced the evap fan motor assembly after thawing out the evaporator. I replaced the evap motor assembly because i damaged it while defrosting the evaporator. Too much heat warped the fan blade and bracket. I replaced the motor because of the abnormal load it was put under when it was making all the noise from trying to spin through the ice buildup on the evaporator. This was all done on the fridge side. Read more
Fridge light won't turn off or stays dark? This door switch detects when the door opens/closes to control interior lighting. Easy 2-minute DIY fix.
Purchased new evaporator/heater/sensor assembly from appliance parts. Removed new heater, sensor and wire harness from new assembly and from existing unit in refrig section. Then installed new heater and sensor on old refrig evaporator, avoiding complex soldering and recharge with Freon. Once repaired all failure indications cleared and refrigerator section performing like new. Also purchased new heater for water tank and several broken plastic parts that went in in 2 minutes. Changed door... Read more
Rubber grommet that secures the evaporator cover panel in your refrigerator. Replace if cracked, brittle, missing, or no longer holding cover firmly in place.
Initially called repair man and he checked it out , took about half of the freezer insides out to decide the fan was bad. Then he informed me that he did not have part and was going to be on vacation for a week. So I finished tearing apart the freezer to get to part removing the ice maker and rear panel, removed fan and ordered new parts, parts arrived as said and I put back together. Happy to say it is fixed. Read more
Fixes corroded or broken wiring causing motor failure. Connects evaporator fan motor to electrical system. Moderate DIY repair, requires panel removal.
Changed the evaporator fan cover. I was told it comes with the fan motor and it did not so I had to order a fan motor. Then I found the fan wire harness was corroded and broken. I also installed an aluminum tab on the heater element that extends down the drain hole. I also had to clean the back of the fridge and unclog the two drain tubes on the back of the fridge next to the compressor and now it works fine. PS- use a small open end wrench to push the fan blade off the old fan. Read more
Replace your refrigerator's E27 light bulb socket holder to restore interior lighting. Fits standard incandescent or LED bulbs. Confirm fit with your model.
Drain cap assembly for refrigerator defrost drain systems. Replaces cracked, broken, or missing drain caps that allow water leakage or improper drainage.
Water pooling under crisper drawers? A cracked or leaking water tank assembly often causes this issue. Moderately easy DIY repair in under an hour.
I replaced the leaking water tank, and with the help of the video as my guide, it showed the steps needed to replace the tank in an easy to understand manner. Even though in the step by step video they used a different make and model fridge, my Samsung had all the parts and fittings in all the same places just like the GE model in the video. So all in all, it was an easy fix that took less than an hour. Read more
This is a small white bushing that fits around the solenoid in the ice dispenser auger motor assembly. It reduces friction and vibration, allowing the solenoid to operate smoothly when dispensing ice. Replace this bushing if you hear unusual rattling or buzzing from the dispenser area, or if the ice dispenser is not engaging properly.
Found a useful video from AppliancePartsPro. Once I got it apart I figured out what parts I needed. I was able to find the parts for my particular ice maker. Just now finished the repair and works like new again. Read more
Fix doors that won't close properly or align correctly with this refrigerator cam riser. Supports door mechanism components for smooth operation.
Fixes refrigerant flow issues and moisture buildup in cooling system. This filter dryer removes moisture and contaminants from refrigerant lines.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.