Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
I did it myself I order all parts threw appliancepartspro well I had it apart I replaced rollers on drum very easy fix if you needed to no anything they have videas on everything you need to no very good place to get parts and repair things yourself thank appliance pros Read more
This upper and lower air duct assembly includes the lint screen.
We installed a new housing Read more
Worked fine. took about 5 minutes to repair. Read more
Found belt tension idler worn down to the bushing, found the drum rollers stiff and hard to turn, found belt worn and starting to crack. Ordered all of these plus front slide pads. Replaced and now feel confident the dryer will run without problems. Absolutely need a pair of snap-ring pliers for this job. I used a high temp grease on the roller shafts, some info on what lubrication is recommended would be good. While dryer is disassembled, clean/vacuum all the lint from the cabinet, motor,... Read more
Since finding out pulley on motor is factory installed, I had to order a new motor with new pulley on it. I could not remove old blower wheel from old motor, no matter how hard I tried so I had to purchase new blower wheel and new blower housing. I am super happy finding Appliancepartspros.com the prices, and my experience was great! I basically removed everything step by step, and then replaced with the new parts step by step. I had help by watching videos that were provided online before and... Read more
Replaced seal and cleaned lint out of cabinet. Read more
After checking all the common reasons (vent, element, fuses, temp sensors, etc.), the only thing left was the Dryness Monitor. The "LESS" light came on, but the ""HIGH" light didn't. Removed the 5 screws on the rear cover, disconnected the 4 wire & single wire plugs and the unit just snaps out. Since my dryer is Almond colored and the part was for a White dryer, I took the one screw out holding the board and transferred it to the original housing. Reconnected the 4 wire & single wire plugs and... Read more