Sge63e05uc Parts

The Base Panel is an OEM replacement part for Bosch dishwashers. It serves as the protective front cover for the dishwasher's base, hiding the internal parts and providing a finished look to your appliance.

A bad base panel can occur due to accidental damage, wear and tear, or discoloration over time. Signs of a faulty base panel include cracks, dents, or a worn-out appearance.

Symptoms of a bad base panel include:

• Visible cracks, dents, or damage 
• A worn-out or faded appearance
• Difficulty in cleaning the panel

Restore your Bosch dishwasher by replacing the damaged or worn-out base panel with this genuine OEM part. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This water inlet valve controls incoming water flow to the appliance, ensuring proper fill during cycles and helping prevent overfilling. Replaces a worn or leaking valve to restore normal water delivery and cycle performance. What it does:

• Opens and closes to allow water into the appliance when a cycle requests fill.
• Prevents water flow when the machine is idle, helping avoid leaks or flooding.
• Commonly fails when leaking, not filling, or filling continuously.
• Electromechanical valve operated by the appliance's control board or timer.

• One water inlet valve

• Disconnect power and turn off the water supply before starting any work.
• Verify valve orientation and hose connections match the appliance before finalizing installation.
• Inspect inlet hoses and clamps for damage; replace if brittle or cracked.

This spindle is the rotating shaft that transfers motion between the motor/gearbox and the appliance's moving components, restoring proper rotation and alignment for reliable operation. Fits as a direct replacement when the original spindle is worn or broken. What it does:

• Connects and transmits rotational force from the drive assembly to the appliance's moving part
• Maintains alignment and smooth rotation for consistent performance
• Can stop wobble or intermittent movement caused by a bent or damaged shaft
• Helps restore normal operation if the original spindle is cracked, worn, or seized

• Intended for users comfortable with appliance repair; unplug appliance and shut off water before starting
• Inspect related seals, bearings, and mounting hardware; replace if damaged
• Use correct tools and torque per manufacturer guidance; avoid forcing components to prevent damage

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This replacement cover protects internal components and finishes the appliance's exterior where installed. It restores a clean, secure appearance and helps prevent dust, moisture, and debris from reaching sensitive parts. What it does:

• Serves as a protective access panel for internal components
• Shields wiring, connectors, and electronics from dust and incidental contact
• Restores the appliance's exterior finish for a cosmetically complete repair
• Helps maintain safe operation by covering moving or live parts

• Before installing, disconnect power and water to the appliance to avoid shock or injury.
• Remove any trim or fasteners holding the old cover; keep screws for reuse.
• Align the cover carefully and secure with the original mounting hardware; do not force parts.
• If plastic clips or tabs are damaged, replace them to ensure a secure fit.

This moisture shield protects internal components from water and condensation, helping prevent moisture damage that can cause corrosion or electrical problems. Simple replacement maintains proper moisture control and appliance reliability. What it does:

• Redirects or blocks water and condensation away from sensitive parts
• Helps prevent shorting, corrosion, and moisture-related failures
• Supports normal drainage and airflow in the affected area
• Restores the appliance's original moisture-protection layout after damage or wear

• One moisture shield

• Replace with the appliance powered off and unplugged for safety
• Inspect mounting tabs and surrounding seals; replace any damaged fasteners
• Position the shield exactly as the original part to maintain drainage paths
• Address affected components before reassembly

This holder is a small mounting bracket that secures internal components in place, helping prevent movement and noise while the appliance runs. It restores proper alignment and reduces loose or rattling parts. What it does:

• Secures control modules, hoses, or assemblies to the appliance frame
• Prevents vibration and movement that can cause noise or wear
• Helps maintain proper alignment of connected components
• Common symptom: loose or rattling parts near the holder location

• One holder/mounting bracket

• Disconnect power (and water if applicable) before starting any repair
• Inspect mating surfaces for damage; replace if worn or broken
• Use appropriate tools and fasteners; do not overtighten plastic tabs

This holder is a small mounting bracket that secures internal appliance components, helping keep parts aligned and stable for reliable operation. Use it to replace a worn or broken bracket that allows components to shift or rattle. What it does:

• Provides a stable mounting point to secure internal parts and assemblies
• Prevents component movement that can cause noise, rubbing, or misalignment
• Helps maintain proper clearances to avoid intermittent contact or wear
• Restores secure fitment when the original bracket is cracked, bent, or missing

• One holder

• Disconnect power (and water, if applicable) before beginning any repair
• Typical installation requires basic hand tools; keep fasteners from the original part
• Inspect surrounding clips and fasteners and replace if damaged

This fixing kit contains the replacement mounting hardware needed to secure panels and components on compatible Bosch appliances, helping stop rattles and restore proper fit and alignment. What it does:

• Replaces worn or missing mounting clips and screws that hold panels or trim in place
• Helps stop rattling, vibration noise, and loose-fitting panels
• Restores secure attachment for access panels, trim, or other appliance components
• Useful when panels shift or won't sit flush after service or removal

• Disconnect power and/or water supply before beginning any repair
• Handle sharp edges and retain any original fasteners for reference
• Use proper tools and avoid overtightening screws to prevent damage
• Refer to the appliance's service manual or parts diagram for correct placement

This replacement holder secures internal components in place to help maintain proper alignment and reduce movement. Replacing a damaged holder restores stable fitment and helps cut down on noise from loose parts. What it does

• Secures and positions internal components or assemblies to maintain correct alignment
• Prevents excess movement that can cause rattling or intermittent contact
• Helps ensure other parts operate without binding or shifting
• Use when the original holder is cracked, broken, or missing

• Disconnect power before servicing to avoid shock or injury
• Inspect surrounding components and replace any damaged fasteners or clips
• Hand-fit the holder and secure per the appliance's service instructions; avoid forcing parts into place