Sgsx456 Parts

Replace a broken, cracked, or missing control knob on your cooktop. This dial installs on the control panel to adjust burner settings and temperature.

The Knob is an OEM part for Bosch ranges. This part allows users to control the heat settings of the burners, providing precise adjustments for cooking.

Causes of a bad knob can include cracking, breaking, or the internal mechanisms wearing out, preventing it from properly engaging with the control shaft.

Symptoms of a bad knob include:

• Difficulty turning the knob
• The knob not staying in place or feeling loose
• Inability to adjust the burner settings accurately
• The knob falling off or not engaging with the control shaft

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Simmer Control is an OEM component specifically designed for Bosch ranges. It regulates gas flow to provide the lowest possible flame setting needed for delicate cooking tasks. Precise control allows for uniform, attentive simmering.

Symptoms of a bad simmer control include inconsistent or unadjustable flame heights on low settings. Cracks, damage, or wear of internal mechanisms over time can also cause unstable flame control.

Causes of bad simmer control can be normal wear and tear issues like dirt buildup impeding mechanisms. Accidental impact or overheating leading to cracks are other causes for replacement.

Symptoms of a bad simmer control include:

• Flames that surge or fluctuate below the lowest settings   
• Inability to adjust the flame down sufficiently low
• Burners that shut off or cause overflow flooding on low-heat  

This OEM Bosch part is also compatible with Thermador and some Kenmore ranges. Replace for dependable, Fine-tuned low-heat performance.
 

Solenoid valve controls the appliance's water inlet using an electrically actuated plunger to open and close flow. Replacing a failing valve helps restore proper filling and can stop leaks, overfilling, or no-fill conditions. What it does

• Electrically opens and closes the inlet to allow water into the appliance during fill cycles.
• Shuts off water flow when the valve is de-energized to prevent overfilling.
• Common symptom fixes: no water fill, continuous filling, visible leaks at the inlet, or related fill/flood error codes.
• Interfaces with the appliance inlet hose and the electrical connector for timed/controlled fill cycles.

• One solenoid valve.

• Disconnect power and shut off the water supply before starting any repair.
• Handle electrical connectors carefully; ensure correct orientation and a secure connection.
• Inspect and replace any worn seals, gaskets, or hoses to prevent leaks after installation.

This is a quality spark re-igniter module for stoves, ranges, and ovens. This part is located between the cooktop on the stove. This part creates a spark to ignite a low-pressure gas flow that goes to the flame pilot light. It will stay lit until the thermostatic control on the oven is turned to the off position.Sometimes, the spark re-igniter will become damaged or stop working, which can cause problems using the range. If there is a weak or nonexistent spark between the igniter pin and the edge of the gas burner, this is a sign the spark re-igniter needs to be replaced. The first thing to do is unplug the stove from the wall. Access the back of the stove and remove the large panel. Remove the original component and install the new one in its place.This is an authentic OEM replacement part that has been obtained directly from the manufacturer. The spark re-igniter module is sold as a single part. It is made to be compatible with Bosch and Thermador stoves and ranges.

This burner cap is a genuine OEM replacement part sourced directly from the manufacturer intended for use on gas stoves. This burner cap is for the B burner on the stove. The burner cap sits over the burner head to dissipate the heat and protect the burner head from food spills. If the burner cap is damaged due to food spills or becomes lost, it should be replaced before the burner is used. It is difficult to cook evenly if the burner cap is missing. The flame from the burner head is not evenly dispersed and is more intense. If the burner cap is damaged or missing, it should be replaced immediately.Tools are not required to replace the burner cap. Make sure the stove is not hot and has not been used recently before making the repair. To start, disconnect the gas and power from the stove. Remove the burner grate from the stove. Lift the burner cap and remove it from the burner head. Place the new cap over the burner head and align it. Set the cap on the burner head and return the burner grates to their places. Restore the power and gas to the stove.This burner cap for the B burners is made of heavy-duty metal. It is individually sold and made for gas stoves manufactured by Thermador and Bosch.

This is a genuine OEM replacement burner cap part sourced directly from the manufacturer intended for use on gas stoves. This burner cap is made for the C burner. Burner caps cover the burner head where the flame comes out to cook the food. The burner cap spreads the flame out rather than allowing it to shoot straight up. This helps to cook the food evenly by heating the pans on the burner grate around the bottom rather than just the middle. The burner cap also helps protect the burner head from spills that occur when food boils over. Food spills could clog the gas burner and cause more extensive damage to the stovetop.The stove should be cool enough to touch before the burner cap is replaced. Unplug its power source and turn the gas off to the stove. Remove the burner grate and burner cap from the stove. Place the new burner cap over the burner head and replace the burner grate. Reconnect its power source and turn the gas back on.This burner cap for C burners is made of heavy-duty metal. It is individually sold and made for gas stoves manufactured by Thermador and Bosch.