She3ar Parts

The Dishwasher Control Panel Facia is an OEM replacement part designed specifically for Bosch dishwashers. It serves as the interface to control all wash cycles and provides informative displays. Causes of a damaged control panel facia can be general wear and tear over time. 

Symptoms of a bad control panel facia include:

• Non-responsive buttons
• Cracked or broken surfaces
• Controls that do not align properly

This genuine Bosch facia restores the correct function and appearance of the control panel. This Bosch part can also be used on Thermador and Gaggenau appliances.

The Spray Arm is an OEM replacement part for Bosch dishwashers. Stationed inside the wash cabinet, it evenly distributes water and cleaning chemicals across dishes. The spray arm utilizes multiple horizontal and vertical jets to reach all surfaces of every load.

Causes of a faulty spray arm typically involve clogged or misdirected nozzles after extended use. Mineral deposits may disrupt water pressure or restrict openings in the rotating assembly.

Symptoms of a bad spray arm include: 

• Incomplete cleaning requiring pre-rinsing of dishes
• standing water or pooling detergent inside the washer
• Dried or stuck-on residue remaining in hard-to-reach areas  
• Dishes coming out still soiled despite cleaning attempts

Replacing your spray arm restores thorough coverage and superior wash performance. This genuine Bosch part ensures all dish surfaces receive optimum cleaning from every angle. Compatible with Thermador, Gaggenau, and select Kenmore models.

The Detergent Dispenser Seal is an OEM part for Bosch dishwashers. Located inside the detergent dispenser compartment, it creates a water-tight barrier, preventing premature detergent dissolution and leaks. Working seamlessly with the dispenser system, the seal facilitates controlled detergent release for optimum cleaning performance cycle after cycle. 

Causes for a bad detergent dispenser seal can include wear and tear from repeated use, deformations due to temperature fluctuations, and cracks or splits from general use.  

Symptoms of a bad detergent dispenser seal include:

• Detergent residue or puddles inside the dishwasher  
• Premature detergent dissolution before the main wash
• Leaks or drips from the dispenser area when closed
• Ineffective or inconsistent cleaning ability

This genuine Bosch detergent dispenser seal replacement will restore its water-tight barrier. It is also compatible with some Thermador, Siemens, and select Kenmore models.

The Panel-Base is an OEM part for Bosch dishwashers. 

Causes of a bad panel-base can include long-term wear and tear from normal operation, subjecting it to excess weight or strain, or accidental damage from moving or transporting the dishwasher.

Symptoms of a failing panel-base include:

• Warping or bending of the sheet metal
• Loosening or detachment from adjacent parts
• Cracks or breaks appearing in welds/seams
• Leaks developing from compromised seals

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Mounting Bracket is an OEM component specifically designed for Bosch dishwashers. Rigid and durable, it securely anchors dishwashers to surrounding countertops and cabinetry during installation and use. Correct positioning by brackets streamlines plumbing and electrical connections.

Symptoms of a faulty mounting bracket can include shifts in the dishwasher's installed position or coming loose over time. Cracks or breaks inhibiting secure attachment necessitate replacement to ensure safety and compliance with installation standards.

Causes of a bad mounting bracket can involve stresses from frequent load shifting putting strain on attachment points. Impact incidents during installation introducing fracture risks also influence replacement needs to restore fully stable integration.

Symptoms of a bad mounting bracket include: 

• Movement or rocking of the dishwasher in its installed space
• Loose attachment enabling potential tripping hazards  
• Installation difficulties without the bracket in place

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. 
 

The Leveling Leg is an OEM replacement part for Bosch dishwashers. It permits adjustment to compensate for uneven floor surfaces, leveling the dishwasher, and ensuring proper drainage. Precise leveling facilitates water collection and effective cleaning performance. 

Symptoms of a bad leveling leg can include broken or stripped threads preventing adjustment, and conditions that promote rocking during operation. 

Causes of a bad leveling leg include:

• Loose or unstable mounting where legs spin freely  
• Legs unable to securely lock into position once adjusted   
• Drainage issues such as standing water or poor rinsing
• Excessive vibration or noise heard from the leveling area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Panel-Facia is an OEM part for Bosch dishwashers. It forms the protective enclosure surrounding control interfaces, touchpads and decorative finishes.

Causes of a defective panel-facia are wear from normal operation, accidental impact events or sustained exposure to demanding dishwasher environments. 

Symptoms of a bad panel-facia include:

• Damage like dents, scratches or cracks in the surface
• Gaps or looseness where it mounts to the dishwasher frame
• Discoloration, peeling or flaking of applied coatings
• Blocked air circulation paths impacting temperature control

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.

• Fastens components to the appliance frame or assemblies
• Replaces a missing, stripped, or rusted original screw
• Helps reduce rattling or vibration from loose hardware
• Restores proper alignment of panels or brackets

• Disconnect power and shut off water before servicing
• Refer to your model's parts diagram to locate and place
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening

This control unit is the appliance's main electronic control board. It directs power and timing to components and interprets sensor and user inputs. Replacing a failed board helps restore reliable operation and responsive controls.

• Coordinates cycle timing and operating modes for the appliance
• Sends power to components based on program logic
• Interprets signals from sensors and switches; interfaces with the user controls/display
• Common failure signs: dead or unresponsive controls, won't start or complete cycles, intermittent operation, or recurring error codes

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the PCB with ESD precautions; avoid touching circuitry and components
• Label/photograph wiring; transfer connectors one at a time to the new board
• Secure mounting and connections before restoring power and testing

The control unit is the appliance's main electronic control board. It manages cycle timing and directs power to key components, helping the machine start, run, and complete programs as designed.

• Governs program logic and timing for each cycle
• Distributes power to components such as pumps, valves, motors, and heaters
• Interfaces with sensors and the door latch to advance or pause operation
• Helps regulate heating and drying functions where applicable
• Common failure symptoms: won't start, won't advance or complete a cycle, stops mid-cycle, no fill or no drain, or erratic operation

• Disconnect power at the breaker (and shut off water supply if accessing a dishwasher) before servicing
• Access location varies by model; refer to your unit's tech sheet
• Use ESD protection; handle the board by edges and transfer connectors one at a time
• After installation, restore power and run any model-specific diagnostic/service test to verify operation

This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.

• Secures the toe-kick or lower access panel to the base/frame
• Restores proper fit when the original screw is lost or damaged
• Helps reduce panel rattles and vibration
• Maintains correct alignment and clearance at the bottom edge

• Disconnect power before servicing; also shut off the water supply
• Support the panel and align holes before threading the screw
• Start by hand to avoid cross-threading; tighten snugly—do not overtighten
• Verify size matches the original; replace matching hardware together if required by your model

This control panel is the front console cover for the appliance, providing the button/selector surface and protecting the user interface assembly. Replace a cracked or loose fascia to restore proper button alignment and a clean, finished look. What it does:

• Forms the front control console and supports the user interface components
• Provides the button/selector surfaces for cycle and option selection
• Helps shield internal controls from incidental contact and debris
• Common signs of failure: cracked plastic, broken mounting tabs, loose or missing panel, difficulty pressing buttons, cosmetic damage

• 1 fascia/control panel

• Disconnect power before servicing
• Remove retaining screws/clips for the control console, then lift off the old fascia
• Transfer the user interface module and any brackets to the new panel
• Reassemble carefully; avoid stressing wiring and plastic tabs

This sump screw secures the dishwasher's sump or sump cover to the tub, keeping the assembly tight and leak-resistant. Replace a missing, stripped, or damaged screw to restore a proper seal and stable mounting.

• Fastens the sump or sump cover to the dishwasher tub
• Helps maintain a watertight seal to reduce leaks
• Keeps filter/sump components aligned and secure
• Replaces missing, stripped, or damaged hardware
• Helps address leaks or rattling around the sump area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack and filters to access the sump area
• Ensure mating surfaces and seals are clean and properly seated
• Tighten snugly by hand; do not overtighten to avoid stripping

This control unit is the appliance's primary electronic control board, coordinating inputs, power, and timing for proper operation. Replacing a failed module can restore responsive controls and consistent performance when the original board is faulty.

• Interprets user input and sensor signals, then commands components via onboard outputs as designed
• Regulates cycle timing and operating sequences for reliable operation
• Address symptoms such as: won't start or power up, unresponsive buttons/display, intermittent operation, stopping mid-cycle, or error codes
• Engineered for the specific appliance configuration defined for your model

• Disconnect power (unplug or switch off the circuit breaker) before servicing
• Handle the board by the edges and use ESD protection to avoid static damage
• Photograph or label all connectors before removal to ensure correct reassembly
• Some models require a configuration step or service test after installation; follow your model's service documentation

The Water Inlet Fill Hose is an OEM part for Bosch dishwashers. This part is responsible for safely and efficiently connecting the dishwasher to your home's water supply, ensuring that water flows into the dishwasher at the correct pressure and volume for optimal cleaning performance. 

Over time, the Water Inlet Fill Hose can become susceptible to wear and tear, leaks and blockages.

Symptoms indicating the need for a new Water Inlet Fill Hose include:

• Water pooling around the dishwasher base, pointing to a potential leak in the hose.
• The dishwasher not filling with water properly, or filling very slowly, suggesting a blockage or damage to the hose.
• A visible inspection reveals cracks, bulges, or signs of corrosion on the hose connectors.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This factory fastener secures panels, brackets, or internal components in your appliance, helping keep assemblies tight and rattle-free. Replace missing or stripped screws to restore a secure fit and dependable operation.

• Fastens components to the appliance frame, chassis, or panel assemblies
• Helps maintain alignment and reduce vibration or rattling
• Replaces lost, rusted, or stripped screws during service
• Common signs it's needed: loose panel or handle, vibration noises, or parts that won't stay secured

• Disconnect power and shut off water or gas before servicing
• Match the screw's location and length to the original from your model
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver type/size specified for your model's screw head