She3ar56uc Parts

The Toe Panel Screw is an OEM replacement part for Bosch dishwashers. It secures the toe panel to the dishwasher.

Causes may involve normal wear and tear over time, improper installation, or damage from excessive force or impact. Replacing with this genuine OEM screw will reinforce your Bosch dishwasher's integrity for reliable performance.

Symptoms of a bad toe panel screw can include:

• The toe panel becoming loose, cracked, or removable
• Internal components visible underneath a loose toe panel
• Strange noises or vibration emanating from the toe panel area

This OEM Bosch part is also compatible with Thermador, Gaggenau and some Kenmore models.

This upper dishrack rail repair kit restores a secure, smooth glide for the upper rack by fixing loose or damaged rail mounting points on the dishwasher's tub sidewalls. Use it to bring back proper tracking and level support for the upper rack. What it does:

• Repairs damaged or detached upper rack rail mounts
• Secures the rails to keep the upper rack level and aligned
• Restores smooth sliding action of the upper rack
• Common symptoms: upper rack is hard to slide, tilts or drops on one side, or pops off the track

• One upper dishrack rail repair kit

• Disconnect power at the breaker and shut off the water supply before servicing
• Remove the upper rack to access the rail mounting points
• Use a suitable screwdriver/driver to install the repair kit at the rail mounts; do not overtighten
• Verify both rails are level and the rack moves freely before restoring power

The Float Switch is an OEM part for Bosch dishwashers. This part monitors the water level inside the dishwasher. It helps prevent overflows by detecting when the water level gets too high and signaling the control board to stop filling and start draining the water.

Causes of a bad float switch can include wear and tear from regular use, buildup of debris or mineral deposits, or electrical malfunctions.  

Symptoms of a bad float switch include:

• The dishwasher not filling with water
• Water overflowing from the dishwasher
• The dishwasher not advancing through the cycles
• Error codes related to water level issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Screw is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the kickplate panel at the bottom of the dishwasher in place.

Causes of needing a replacement screw may include screws becoming stripped or damaged during installation or removal, corrosion or rust buildup on the screws over time, and screws going missing or getting lost during dishwasher maintenance.

Symptoms of an issue with the Screws include:

• A loose or rattling kickplate panel
• Difficulty properly aligning or securing the kickplate
• Visible gaps or an uneven fit of the kickplate

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Leveling Foot is an OEM part for Bosch dishwashers. It is designed to provide stability by allowing you to adjust the height of the dishwasher, ensuring it is level on uneven flooring.

Causes of a bad leveling foot can include wear and tear over time, damage from excessive force or impact, or thread stripping from frequent adjustments.

Symptoms of a bad leveling foot include:

• The dishwasher rocking or wobbling during operation
• Difficulty in achieving a level position
• Increased noise or vibration when the dishwasher is running

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The On/Off Button is an OEM part for Bosch dishwashers. It provides the user interface for starting and stopping dishwasher cycles as needed. Reliable button function is crucial for convenient appliance operation.

Causes of a faulty on/off button include standard wear over heavy use cycles, liquid damage, or occasional impact. Periodic cleaning helps prevent common issues.

Symptoms of a bad on/off button include:

• Button sticking or failing to depress fully
• Inconsistent or unreliable response to user input
• Starting cycles without being pressed
• No response at all when trying to turn on the unit

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Terminal Box is an OEM part for Bosch dishwashers. It serves as the central hub for connecting electrical wires within the appliance, ensuring a safe and organized electrical system.

Over time, the terminal box can become damaged due to electrical malfunctions, corrosion, or physical impact. Wear and tear from regular use can also affect its integrity, leading to potential electrical issues.

Symptoms of a bad terminal box include:

• The dishwasher not starting or failing to complete cycles
• Intermittent power issues
• Burning smells or visible burns around the terminal box
• Electrical shorts or tripped circuit breakers

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Lower Spray Arm is an OEM part for Bosch dishwashers. It is responsible for cleaning dishes located on the lower rack through its rotating spray of water.

The lower spray arm effectively washes dishes by directly targeting them with pressurized water, helping to break up and rinse away food particles and debris. It plays an integral role in the dishwasher's cleaning performance.

Causes of a bad lower spray arm include clogging, blockages, or damage to the arm itself that prevents proper rotation.

Symptoms of a bad lower spray arm are:

• Dirty dishes on the lower rack even after a full cycle
• Dishes on the lower rack not receiving adequate water coverage
• Noticeable buildup of food residue in the lower rack and spray arm area

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This kit replaces the sliding rails that support and guide the upper dishrack, restoring smooth, level movement so the rack doesn't bind, tip, or drop during loading and unloading.

• Guides the upper rack in and out along the tub sidewalls
• Helps correct a sticking, uneven, or hard-to-slide upper rack
• Can reduce issues like a sagging rack or difficulty engaging rack stops
• Wear from age, heavy loads, or corrosion can require replacement

• Disconnect power and shut off water before servicing
• Remove the upper rack and stops to access and swap the rails
• Transfer any hardware from the old rails
• Test rack travel and ensure stops are secure before restoring power

The Water Inlet Housing is an OEM component specifically designed for Bosch dishwashers. It provides the connection point for water to enter the appliance and is responsible for metering the proper amount of water into the spray arms and sump during each cycle. Working with the electronic control module, the water inlet housing facilitates precise water distribution. 

Causes of a bad water inlet housing can include mineral buildup affecting water flow, worn or damaged valve components preventing proper metering, and failure of electronic components interfacing with the housing. 

Symptoms of a bad water inlet housing include:

• Incomplete or inefficient washing  
• Abnormal noises coming from water components
• Water leaking or spraying outside of the dishwasher 
• Error codes related to water issues

This Bosch water inlet housing replacement part is compatible with some Siemens, Gaggenau, Thermador, and select Kenmore models. Replacing the housing ensures optimal water usage.

The Hinge Lever (RH) is an OEM component specifically designed for Bosch dishwashers. This right-hand lever is a part of the dishwasher door hinge assembly, working to open and close the door during each use. 

Causes of a bad hinge lever can include wear and fatigue over thousands of opening and closing cycles. Damage can also potentially occur from any impact or denting of the door surface near the lever mechanism.

Symptoms of an ineffective hinge lever include:

• The dishwasher door sagging or becoming misaligned  
• Difficulty fully opening or closing the door
• Loud squeaks or grinding noises coming from the hinges
• The door potentially detach from the hinge if broken 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.

This start button is the user-pressed cap on the control panel that engages the underlying switch to begin a cycle. Replace it to restore proper feel and reliable operation when the original button is cracked, loose, or missing.

• Serves as the Start control on the user interface
• Transfers your press to the control's start switch to initiate a cycle
• Helps address a broken, sticking, or missing start key
• Restores alignment and tactile feedback at the control panel

• Disconnect power to the appliance before servicing.
• Open or remove the control panel/fascia to access the button.
• Release retaining tabs/clips and remove the old button; transfer any small clips/springs from the original if present.
• Align and snap the new button into place, reassemble, and test operation.

The Cover is an OEM part for Bosch dishwashers. Designed to securely seal the sump area, this part prevents leaks and ensures that water is properly circulated and drained during the dishwashing cycle. 

Causes of failure might include physical damage such as cracks or warping, which can compromise the seal, or the buildup of debris that prevents proper seating of the cover. 

Symptoms of a failing Cover include:

• Water leaks from the bottom of the dishwasher
• Poor washing performance due to inadequate water circulation
• Unusual noises as the pump struggles to draw or expel water
• Visible damage or warping of the cover itself

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Wire Harness is an OEM component specifically designed for select Bosch dishwashers requiring electrical connections between moving components. It facilitates signal and current pathways throughout appliance frames.

Reinforced flexing sections bend without kinks accommodating shifting door movements. While connector joints remain snug against jostling. This daisy chain design simplifies diagnostics and maintenance procedures compared to individual wiring. 

Symptoms signaling the need for a new harness include:

• Intermittent cycle malfunctions indicating loose or corroded connections  
• Broken or cracked housing exposing live conductors to shorting hazards
• Overly taut sections hindering the intended range of component motions

Causes relate to prolonged abrasion stresses and water damage compromising insulation throughout thousands of cycles. Physical damage during repairs may require a complete replacement of this integral wiring backbone.

This OEM Bosch replacement harness is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers relying on consistent control schemes. Reinstallation restores reliable electrical pathways.
 

The Hinge Lever (LH) is an OEM part for Bosch dishwashers. This left-hand lever is responsible for assisting in the opening and closing of the dishwasher door through a pivoting motion. The hinge lever works with other door components like springs and cables to provide smooth, balanced movement of the door. 

Symptoms of a bad Hinge Lever include: 

• Difficulty opening or closing the dishwasher door  
• The door not staying securely closed during the cycle
• Excessive noise or creaking coming from the door area
• Misalignment of the door 

Causes of a bad Hinge Lever can include normal wear and tear over time, damage from excessive force or weight on the door, or loose mounting hardware.

Note: Left hinge lever

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The Drain Hose Adapter is an OEM component specifically designed for Bosch dishwashers. Securely attaching to the unit base, it provides the interface between the internal drain pump hose and your household plumbing. Precise sizing facilitates complete drainage.

Symptoms of a bad drain hose adapter include leaks allowing water backflow or improper drainage. Mineral buildup risks impeding water evacuation over time as well.

Causes of a bad drain hose adapter involve normal wear reducing a tight seal. Exposure to chemical or heat impacts posing warping presents replacement needs to restore function. 

Causes of a bad drain hose adapter include:

• Puddles of water remain after cycles instead of fully draining
• Mold or mildew growth forms from moisture trapped inside 
• The drain hose slides off during pumping due to a loose interface fit

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.