She3ar75uc Parts

The Mounting Bracket is an OEM component specifically designed for Bosch dishwashers. Rigid and durable, it securely anchors dishwashers to surrounding countertops and cabinetry during installation and use. Correct positioning by brackets streamlines plumbing and electrical connections.

Symptoms of a faulty mounting bracket can include shifts in the dishwasher's installed position or coming loose over time. Cracks or breaks inhibiting secure attachment necessitate replacement to ensure safety and compliance with installation standards.

Causes of a bad mounting bracket can involve stresses from frequent load shifting putting strain on attachment points. Impact incidents during installation introducing fracture risks also influence replacement needs to restore fully stable integration.

Symptoms of a bad mounting bracket include: 

• Movement or rocking of the dishwasher in its installed space
• Loose attachment enabling potential tripping hazards  
• Installation difficulties without the bracket in place

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. 
 

The Leveling Leg is an OEM replacement part for Bosch dishwashers. It permits adjustment to compensate for uneven floor surfaces, leveling the dishwasher, and ensuring proper drainage. Precise leveling facilitates water collection and effective cleaning performance. 

Symptoms of a bad leveling leg can include broken or stripped threads preventing adjustment, and conditions that promote rocking during operation. 

Causes of a bad leveling leg include:

• Loose or unstable mounting where legs spin freely  
• Legs unable to securely lock into position once adjusted   
• Drainage issues such as standing water or poor rinsing
• Excessive vibration or noise heard from the leveling area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Detergent Dispenser Seal is an OEM part for Bosch dishwashers. Located inside the detergent dispenser compartment, it creates a water-tight barrier, preventing premature detergent dissolution and leaks. Working seamlessly with the dispenser system, the seal facilitates controlled detergent release for optimum cleaning performance cycle after cycle. 

Causes for a bad detergent dispenser seal can include wear and tear from repeated use, deformations due to temperature fluctuations, and cracks or splits from general use.  

Symptoms of a bad detergent dispenser seal include:

• Detergent residue or puddles inside the dishwasher  
• Premature detergent dissolution before the main wash
• Leaks or drips from the dispenser area when closed
• Ineffective or inconsistent cleaning ability

This genuine Bosch detergent dispenser seal replacement will restore its water-tight barrier. It is also compatible with some Thermador, Siemens, and select Kenmore models.

This control unit is the appliance's main electronic control board. It directs power and timing to components and interprets sensor and user inputs. Replacing a failed board helps restore reliable operation and responsive controls.

• Coordinates cycle timing and operating modes for the appliance
• Sends power to components based on program logic
• Interprets signals from sensors and switches; interfaces with the user controls/display
• Common failure signs: dead or unresponsive controls, won't start or complete cycles, intermittent operation, or recurring error codes

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the PCB with ESD precautions; avoid touching circuitry and components
• Label/photograph wiring; transfer connectors one at a time to the new board
• Secure mounting and connections before restoring power and testing

This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.

• Fastens components to the appliance frame or assemblies
• Replaces a missing, stripped, or rusted original screw
• Helps reduce rattling or vibration from loose hardware
• Restores proper alignment of panels or brackets

• Disconnect power and shut off water before servicing
• Refer to your model's parts diagram to locate and place
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening

The control unit is the appliance's main electronic control board. It manages cycle timing and directs power to key components, helping the machine start, run, and complete programs as designed.

• Governs program logic and timing for each cycle
• Distributes power to components such as pumps, valves, motors, and heaters
• Interfaces with sensors and the door latch to advance or pause operation
• Helps regulate heating and drying functions where applicable
• Common failure symptoms: won't start, won't advance or complete a cycle, stops mid-cycle, no fill or no drain, or erratic operation

• Disconnect power at the breaker (and shut off water supply if accessing a dishwasher) before servicing
• Access location varies by model; refer to your unit's tech sheet
• Use ESD protection; handle the board by edges and transfer connectors one at a time
• After installation, restore power and run any model-specific diagnostic/service test to verify operation

This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.

• Secures the toe-kick or lower access panel to the base/frame
• Restores proper fit when the original screw is lost or damaged
• Helps reduce panel rattles and vibration
• Maintains correct alignment and clearance at the bottom edge

• Disconnect power before servicing; also shut off the water supply
• Support the panel and align holes before threading the screw
• Start by hand to avoid cross-threading; tighten snugly—do not overtighten
• Verify size matches the original; replace matching hardware together if required by your model

This control panel is the front console cover for the appliance, providing the button/selector surface and protecting the user interface assembly. Replace a cracked or loose fascia to restore proper button alignment and a clean, finished look. What it does:

• Forms the front control console and supports the user interface components
• Provides the button/selector surfaces for cycle and option selection
• Helps shield internal controls from incidental contact and debris
• Common signs of failure: cracked plastic, broken mounting tabs, loose or missing panel, difficulty pressing buttons, cosmetic damage

• 1 fascia/control panel

• Disconnect power before servicing
• Remove retaining screws/clips for the control console, then lift off the old fascia
• Transfer the user interface module and any brackets to the new panel
• Reassemble carefully; avoid stressing wiring and plastic tabs

This sump screw secures the dishwasher's sump or sump cover to the tub, keeping the assembly tight and leak-resistant. Replace a missing, stripped, or damaged screw to restore a proper seal and stable mounting.

• Fastens the sump or sump cover to the dishwasher tub
• Helps maintain a watertight seal to reduce leaks
• Keeps filter/sump components aligned and secure
• Replaces missing, stripped, or damaged hardware
• Helps address leaks or rattling around the sump area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack and filters to access the sump area
• Ensure mating surfaces and seals are clean and properly seated
• Tighten snugly by hand; do not overtighten to avoid stripping

The Water Inlet Fill Hose is an OEM part for Bosch dishwashers. This part is responsible for safely and efficiently connecting the dishwasher to your home's water supply, ensuring that water flows into the dishwasher at the correct pressure and volume for optimal cleaning performance. 

Over time, the Water Inlet Fill Hose can become susceptible to wear and tear, leaks and blockages.

Symptoms indicating the need for a new Water Inlet Fill Hose include:

• Water pooling around the dishwasher base, pointing to a potential leak in the hose.
• The dishwasher not filling with water properly, or filling very slowly, suggesting a blockage or damage to the hose.
• A visible inspection reveals cracks, bulges, or signs of corrosion on the hose connectors.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Button Kit is an OEM part specifically designed for touch control interfaces on Bosch dishwashers. Comprising replacement buttons and membranes, it facilitates an intuitive selection of cycles and options. Working precisely behind lighted displays, the button kit provides customized care for every load.  

Symptoms of faulty buttons include:

• Failure to register inputs or select desired programs
• Stuck buttons refusing some commands altogether   
• Peeling or degradation diminishes legibility over time

Causes relate to general wear sustained through continuous use over many years. Minor spills or moisture seepage may also degrade adhesive bonding beneath plastic surfaces.

Note: Left button kit comes with 2 buttons and instruction sheet.

This genuine Bosch replacement restores a like-new interface for dependable touch control. Compatible also with Siemens, Gaggenau plus most Asko dishwashers.
 

This factory fastener secures panels, brackets, or internal components in your appliance, helping keep assemblies tight and rattle-free. Replace missing or stripped screws to restore a secure fit and dependable operation.

• Fastens components to the appliance frame, chassis, or panel assemblies
• Helps maintain alignment and reduce vibration or rattling
• Replaces lost, rusted, or stripped screws during service
• Common signs it's needed: loose panel or handle, vibration noises, or parts that won't stay secured

• Disconnect power and shut off water or gas before servicing
• Match the screw's location and length to the original from your model
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver type/size specified for your model's screw head

This replacement spring restores proper tension to the linked mechanism so it moves smoothly and returns to its intended position. Replacing a worn or broken spring helps correct looseness, sticking, and misalignment in the affected assembly. What it does:

• Provides return force and tension for the associated latch, lever, or panel
• Helps the mechanism open/close smoothly and stay in position
• When weakened or broken, can cause poor latching, sluggish return, or a loose feel
• Reduces squeaks or rattling from an under-tensioned mechanism

• 1 spring

• Disconnect power to the appliance before servicing; shut off water or gas if applicable
• Note spring orientation and anchor points before removal; take reference photos
• Use needle-nose pliers to remove/attach the spring; mind pinch points and stored tension
• Refer to your model's parts diagram for routing and placement

This insulating part installs in the appliance to form a protective thermal barrier. It helps limit heat transfer to nearby areas and components for safer operation and more consistent performance.

• Creates a thermal barrier around the designated section of the appliance
• Helps maintain stable internal temperatures and operating efficiency
• Shields adjacent wiring, plastics, and trim from excessive heat exposure
• Signs of failure can include brittle/crumbling insulation, visible gaps/missing sections, or hot spots on nearby panels

• Disconnect power and allow the unit to cool completely before servicing; shut off gas/water if applicable
• Access the insulated area and note the original orientation/coverage before removal
• Reuse existing fasteners/retainers; seat the insulation without over-compressing it
• Handle material carefully; wear gloves and eye protection to avoid irritation and cuts

The Button Kit is an OEM part specifically designed for touch control interfaces on Bosch dishwashers. Comprising replacement buttons and membranes, it facilitates an intuitive selection of cycles and options. Working precisely behind lighted displays, the button kit provides customized care for every load.  

Symptoms of faulty buttons include:

• Failure to register inputs or select desired programs
• Stuck buttons refusing some commands altogether   
• Peeling or degradation diminishes legibility over time

Causes relate to general wear sustained through continuous use over many years. Minor spills or moisture seepage may also degrade adhesive bonding beneath plastic surfaces.

This genuine Bosch replacement restores a like-new interface for dependable touch control. Compatible also with Siemens, Gaggenau plus most Asko dishwashers.

The Power Module Programmed is an OEM component specifically designed for advanced Bosch dishwashers. It serves as the intelligent control center, enabling customized cycles tailored for optimal washing results. The programmed power module analyzes load sizes and soil levels to self-adjust water, temperatures, and cycles accordingly.

Causes of failure can include defects in electronic programming from harsh chemicals or water exposure over time. Physical damage such as pins or connections becoming dislodged may also hinder function.

Symptoms include:

• Inability to run specialized cycles like Quick Wash or Glass Care  
• Defaulting to only standard cycles regardless of load type
• Fault codes or resetting of customized programming  
• Full non-responsiveness requiring replacement

Replacing with this genuine Bosch module restores smart cycle optimization. It regulates washing perfectly for dishes, pots, pans, and delicate glassware alike. Compatible with Miele, Thermador, and select Asko models.