She53tf2uc Parts

This push button set replaces worn, cracked, or missing control panel buttons to restore the appliance's appearance and button feel. It provides a like-for-like replacement for damaged push-style controls so you can operate functions reliably. What it does:

• Replaces broken, stuck, or missing push-style control buttons on the control panel
• Restores tactile feedback and correct button spacing for accurate operation
• Helps resolve intermittent or unresponsive button presses caused by physical damage
• Matches original fit and function for straightforward replacement

• Disconnect power to the appliance before beginning any repair
• Access typically requires removing the control panel or control console; keep screws and fasteners organized
• Handle plastic buttons carefully to avoid cracking or warping during installation

This power module is the electronic control module that supplies and regulates power to appliance systems, restoring proper control when the original module fails. It helps the appliance respond to commands and run electrical components reliably. What it does:

• Regulates and distributes power to motors, relays, and sensors to enable normal operation
• Interprets control signals and coordinates appliance functions for cycles and safety features
• Common symptom: appliance does not start, loses power intermittently, or shows no display/response
• Replacing a faulty module can resolve power, control, or communication faults caused by module failure

• One power module/control board assembly

• Always disconnect power to the appliance before beginning service to avoid shock or damage
• Handle the module carefully; protect against static discharge and avoid touching circuit traces
• Verify wiring orientation and secure connections; replace any damaged harnesses or fasteners as needed

The Dishwasher Water Inlet Valve is an OEM part for Bosch dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle.  

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Detergent Dispenser is an OEM replacement part for Bosch dishwashers. It is located inside the dishwasher and is responsible for properly delivering detergent at the appropriate time during wash cycles. The detergent dispenser has a compartment that holds detergent tablets or pods, and a mechanism that releases the correct amount to efficiently clean dishes.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad detergent dispenser include:

• Detergent not dispensing or residue left in the dispenser
• Dirty dishes due to insufficient or improper detergent delivery
• Corrosion or buildup inside the dispenser area
• Dispenser door or cover cracked or damaged

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This is the electronic control module (programmer) that manages dishwasher wash cycles, timing, and user interface logic so the appliance runs the correct program and responds to selected settings. Replaces a failing or unresponsive control board. What it does:

• Receives input from the control panel and sensors to start and sequence wash programs
• Controls valves, pumps, heaters, and cycle timing for proper operation
• Helps resolve symptoms like no power to cycles, unresponsive buttons, or dishwasher that won't start or complete programs
• Restores correct electronic command and timing when the original module is faulty

• Disconnect power and water before beginning any repair
• Handle the module carefully; avoid touching circuit traces and use anti-static precautions if available
• Verify connector locations and harness orientation before removing the old module; take photos for reference

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks