She53tftuc/02 Parts

The Sump is an OEM part for Bosch dishwashers. It is located at the bottom of the dishwasher's tub, responsible for filtering and recirculating water during the wash cycle. The sump is designed to collect and filter out food particles and debris from the water, ensuring that only clean water is circulated throughout the dishwasher. It also houses the circulation pump, which propels the water through the spray arms to effectively clean your dishes.

A bad sump can occur due to clogs, damage, or wear and tear over time. Signs of a faulty sump include poor cleaning performance, water not draining properly, or unusual noises during operation.

Symptoms of a bad sump include:

• Food particles or residue left on dishes
• Water not draining properly 
• Unusual noises during operation

Replace your faulty dishwasher sump with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This is the electronic control module (programmer) that manages dishwasher wash cycles, timing, and user interface logic so the appliance runs the correct program and responds to selected settings. Replaces a failing or unresponsive control board. What it does:

• Receives input from the control panel and sensors to start and sequence wash programs
• Controls valves, pumps, heaters, and cycle timing for proper operation
• Helps resolve symptoms like no power to cycles, unresponsive buttons, or dishwasher that won't start or complete programs
• Restores correct electronic command and timing when the original module is faulty

• Disconnect power and water before beginning any repair
• Handle the module carefully; avoid touching circuit traces and use anti-static precautions if available
• Verify connector locations and harness orientation before removing the old module; take photos for reference

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

This push button set replaces worn, cracked, or missing control panel buttons to restore tactile operation and appearance. Designed to fit the appliance's front control assembly for user interface functions. What it does:

• Provides replacement tactile buttons for the front control panel so selectors and settings can be engaged
• Restores consistent button travel and responsiveness when original buttons are damaged or excessively worn
• Helps stop buttons from sticking, breaking off, or being difficult to press
• Matches OEM fit and mounting style for straightforward replacement

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Access the control panel per the appliance service instructions; buttons typically snap into place or seat on the control assembly
• Inspect the button mounts and surrounding trim for damage before installing the new set

This push button set replaces worn, cracked, or non-responsive control buttons so you can reliably select cycles and options. The buttons restore tactile feedback and proper engagement with the control assembly. What it does:

• Replaces damaged, stuck, or broken control buttons that won't depress or return
• Restores tactile feedback so button presses reliably register at the control
• Helps resolve symptoms like buttons that don't engage, are missing, or look damaged
• Works as the user-interface buttons used to select cycles and options

• One push button set

• Disconnect power at the breaker or unplug the appliance before starting
• Installation typically requires removing the control panel or trim; small screws and clips may be present
• Handle plastic buttons carefully to avoid scratching or breaking during installation
• Test button function before reassembling the appliance completely

This facia panel is the exterior trim piece that covers and protects the appliance control area, restoring the original appearance and providing a clean surface for controls. It replaces cracked, scratched, or warped front trim. What it does:

• Restores a finished look to the control area and conceals underlying components
• Provides a stable mounting surface for buttons, switches, and display overlays
• Helps protect controls from spills, dust, and everyday wear
• Commonly replaced when the panel is cracked, warped, or cosmetically damaged

• One facia panel

• High-level replacement: typically unclips or screws into place; follow OEM instructions
• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Keep small fasteners and clips organized during disassembly for reassembly
• If clips or fasteners are damaged, replace them with OEM equivalents for proper fit

The Insert is an OEM component specifically designed for select Bosch dishwashers. Located inside the tub basin, the tines provide the necessary friction to help clean dishes. 

Causes of a bad insert can include mineral buildup that prevents proper movement or damage from dropped utensils that have bent the tines out of place.

Symptoms of a bad insert include:

• Dishes still feeling dirty after the wash cycle   
• Rust or mineral deposits visible on the tines
• Tines that are bent or missing which reduces cleaning surface area

Replacing the insert with this OEM Bosch part restores optimal cleaning performance. Compatible with 300 series models, it features stainless steel construction that withstands corrosion from detergents. This replacement insert is warranted to perform as the original Bosch design for reliable dish cleaning.
 

This Bosch Dishwasher Insert is an OEM part for Bosch dishwashers, specifically designed to enhance the interior functionality of your appliance. The insert is a vital component that aids in the organization and secure placement of dishes, utensils, and other items during the wash cycle.

Common causes of damage to a dishwasher insert include physical strain from overloading, exposure to high temperatures and harsh detergents, and general wear and tear. These factors can lead to warping, cracking, or the breakdown of the insert's structure.

Symptoms of a bad insert include:

• Difficulty in fitting dishes and utensils properly.
• Reduced cleaning effectiveness due to improper loading.
• Noticeable cracks, warps, or breakage in the insert structure.
• Loose or unstable compartments within the insert.
• Difficulty in sliding or securing the insert inside the dishwasher.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.