She55m12uc Parts

The Dispenser is an OEM part for Bosch dishwashers. It dispenses detergent and rinse aid at appropriate times during the dishwashing cycle, ensuring optimal cleaning and rinsing performance. The dispenser is essential for maintaining the efficiency and effectiveness of your dishwasher.

Causes of a bad dispenser can include clogging from detergent residue, mechanical failure of the dispenser door or latch, or electronic issues that prevent proper operation. Regular cleaning and maintenance can help mitigate these problems, but parts may still need replacement over time.

Symptoms of a bad dispenser include:

• Inconsistent or improper dispensing of detergent or rinse aid
• Dishwasher leaving spots or residue on dishes
• The dispenser door not opening during the cycle
• Leaks or drips from the dispenser area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The dishwasher float switch chamber assembly monitors water levels in your dishwasher tub to prevent overfilling. The float rises with water level and activates a switch to stop water flow when proper level is reached. Replace this assembly if your dishwasher overfills, won't fill with water, or if you notice water leaking from the unit.

This insert is a small mounting/retaining piece used within the appliance assembly to secure a mating component. It helps maintain proper alignment and a solid fit so parts operate smoothly and stay in place.

• Provides a seat or guide for a mating part
• Helps keep components aligned and reduces unwanted play
• Supports stable, rattle-free operation
• If cracked, worn, or missing, you may notice looseness, misalignment, vibration/rattling, or parts that won't stay attached

• Disconnect power (and water or gas, if applicable) before servicing
• Note the original orientation; take photos for reference during reassembly
• Inspect related clips/fasteners and replace if damaged
• Do not overtighten; confirm secure fit and smooth operation before final reassembly

The Bearing is an OEM component specifically designed for select Bosch dishwashers requiring stabilized rotational movement. As a friction-reducing fixture, it facilitates the smooth operation of assorted mechanisms.  

Precision-ground steel and reinforced polymer composite withstand harsh chemicals and high spinning velocities without excess heat or noise. Independent shielding maintains lubrication without contaminating surrounding compartments.

Causes requiring bearing replacement usually involve coolant deterioration building friction. Physical impacts may dislodge protective seals exposing components to intrusions no longer offering intended cushioning.

Symptoms signaling the need for a new bearing incorporate:

• Grinding or scraping noises emitting from moving joints
• Reduced cycle speeds from binding components  
• Excessive rotational resistance detected by diagnostics sensors

This OEM Bosch replacement bearing is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers relying on long-lasting suspension elements. Proper installation restores noise-dampening characteristics throughout operational stresses.

This turbidity sensor detects how clear the dishwasher's wash water is so the control can adjust cycle time, rinses, and water changes. Replacing a faulty sensor helps restore proper cleaning performance and normal cycle lengths.

• Monitors soil level/clarity of the wash water
• Signals the control to extend or shorten wash and rinse phases as needed
• Helps optimize water use while maintaining cleaning results
• Failure symptoms can include unusually long or short cycles, poor cleaning, repeated draining/refilling, or cycles that won't advance

• Disconnect power and turn off the water supply before servicing
• Pull the dishwasher out as needed; access the sensor from the base area
• Place a towel to catch residual water; release the locking tab or twist-lock, unplug the connector, and install the new sensor fully seated and locked
• Restore power/water and run a test cycle; check for leaks

This kick plate covers the space at the bottom front of your dishwasher, providing a finished appearance. It replaces a damaged or missing plate that exposes the dishwasher's base components or affects the kitchen's appearance.

This replacement cup shelf mounts to the dishrack to support cups, mugs, and other small items during the wash cycle. Replacing a damaged or missing shelf restores organized loading and helps prevent items from tipping or rattling.

• Provides a dedicated support area for cups, mugs, and lids on the rack
• Helps keep small items stable during wash and rinse cycles
• Attaches to rack wires in the designated location
• Common symptoms: cracked or broken tabs, won't stay attached, missing shelf, items tipping over

• Disconnect power to the dishwasher before servicing
• Pull out the rack to access the mounting location
• Align the shelf's tabs/hooks with the rack wires and press until it snaps securely into place
• Verify a secure fit before running a cycle

The leveling leg is an adjustable foot that screws into the bottom corner of your appliance to raise or lower that side independently. Properly adjusted legs keep the appliance stable, level, and reduce vibration or rocking during operation. Replace or adjust this part if your appliance wobbles, shakes excessively, or sits unevenly on the floor.

Includes center spray arm and tube assembly. Color: platinum.

Front corner block support for dishwashers. Distributes force and secures the front panel assembly. Replace if cracked, broken, or missing to restore stability.