She68e05 Parts

Trim strip that finishes and protects an appliance edge while helping hold panels or seals in place. Replacing a damaged strip restores a clean fit and reduces gaps, vibration, and exposure to sharp edges. What it does:

• Covers and protects exposed metal or panel edges — symptom: visible edge damage or chipping.
• Helps secure panel or seal edges to maintain proper fit — symptom: loose or gapped panels.
• Reduces noise and vibration between parts — symptom: rattling or buzzing during operation.
• Helps limit moisture or debris intrusion where panels meet — symptom: dampness or dirt accumulation along seams.

• Disconnect power to the appliance before starting any work; follow lockout/tagout if applicable.
• Remove the old strip and any adhesive or fasteners; inspect the mounting surface for damage.
• Align the replacement strip, then press or snap it into position; some applications may require clips or screws.

This spindle is the rotating shaft that transfers motion between the motor/gearbox and the appliance's moving components, restoring proper rotation and alignment for reliable operation. Fits as a direct replacement when the original spindle is worn or broken. What it does:

• Connects and transmits rotational force from the drive assembly to the appliance's moving part
• Maintains alignment and smooth rotation for consistent performance
• Can stop wobble or intermittent movement caused by a bent or damaged shaft
• Helps restore normal operation if the original spindle is cracked, worn, or seized

• Intended for users comfortable with appliance repair; unplug appliance and shut off water before starting
• Inspect related seals, bearings, and mounting hardware; replace if damaged
• Use correct tools and torque per manufacturer guidance; avoid forcing components to prevent damage

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This replacement cover protects internal components and finishes the appliance's exterior where installed. It restores a clean, secure appearance and helps prevent dust, moisture, and debris from reaching sensitive parts. What it does:

• Serves as a protective access panel for internal components
• Shields wiring, connectors, and electronics from dust and incidental contact
• Restores the appliance's exterior finish for a cosmetically complete repair
• Helps maintain safe operation by covering moving or live parts

• Before installing, disconnect power and water to the appliance to avoid shock or injury.
• Remove any trim or fasteners holding the old cover; keep screws for reuse.
• Align the cover carefully and secure with the original mounting hardware; do not force parts.
• If plastic clips or tabs are damaged, replace them to ensure a secure fit.

This replacement cup rack secures cups and small glassware on the dishwasher's upper rack, keeping items upright and preventing shifting during the wash for more consistent cleaning results. What it does:

• Provides dedicated support for cups, mugs and small glasses on the upper rack
• Helps prevent tipping, sliding and breakage during wash cycles
• Restores missing, cracked or warped cup-holding sections
• Compatible with dishwasher upper rack mounting points and clips

• One cup rack assembly

• Remove the upper rack for easier access; refer to your dishwasher manual for rack removal steps
• Align and snap the rack into the designated upper-rack mounting points; some models may use retaining clips or small fasteners
• Handle edges and clips carefully to avoid damage; wear gloves if needed

This sealing gasket replaces a worn or damaged seal to help prevent leaks and maintain proper sealing in the appliance. It restores a secure fit where the original seal has hardened, cracked, or lost flexibility. What it does:

• Provides a watertight seal at the mating surfaces to reduce leaks and drips
• Helps maintain proper pressure and containment of fluids during operation
• Prevents debris and odors from passing through compromised gaps
• Commonly replaced when visible cracks, flattening, or leaks occur

• Disconnect power and turn off water supply before starting any repair
• Remove the old seal carefully to avoid damaging surrounding parts
• Ensure mating surfaces are clean and dry before fitting the new seal
• Verify proper orientation and seating; do not use sealants unless explicitly specified by OEM

This replacement cutlery drawer is the removable silverware tray that installs at the top of select Bosch dishwashers to organize utensils and improve cleaning access. Restores proper utensil placement and keeps forks, knives and spoons separated during the wash. What it does:

• Holds and organizes cutlery and small utensils in a dedicated top-drawer location
• Keeps items separated so water and detergent reach utensil surfaces for better cleaning
• Replaces cracked, warped or missing drawers that allow utensils to fall or shift
• Helps prevent utensils from blocking spray or interfering with the upper rack

• One cutlery drawer (single-piece silverware tray)

• High-level replacement: remove the old drawer from the upper rack and slide the new drawer into the existing guides/rails
• Check for any broken mounting tabs or guide hardware and replace if needed
• Do not force the drawer; align rails and test smooth travel before running the dishwasher
• Disconnect power to the appliance before inspecting or replacing parts if required for access

This moisture shield protects internal components from water and condensation, helping prevent moisture damage that can cause corrosion or electrical problems. Simple replacement maintains proper moisture control and appliance reliability. What it does:

• Redirects or blocks water and condensation away from sensitive parts
• Helps prevent shorting, corrosion, and moisture-related failures
• Supports normal drainage and airflow in the affected area
• Restores the appliance's original moisture-protection layout after damage or wear

• One moisture shield

• Replace with the appliance powered off and unplugged for safety
• Inspect mounting tabs and surrounding seals; replace any damaged fasteners
• Position the shield exactly as the original part to maintain drainage paths
• Address affected components before reassembly

This holder is a small mounting bracket that secures internal components in place, helping prevent movement and noise while the appliance runs. It restores proper alignment and reduces loose or rattling parts. What it does:

• Secures control modules, hoses, or assemblies to the appliance frame
• Prevents vibration and movement that can cause noise or wear
• Helps maintain proper alignment of connected components
• Common symptom: loose or rattling parts near the holder location

• One holder/mounting bracket

• Disconnect power (and water if applicable) before starting any repair
• Inspect mating surfaces for damage; replace if worn or broken
• Use appropriate tools and fasteners; do not overtighten plastic tabs

This holder is a small mounting bracket that secures internal appliance components, helping keep parts aligned and stable for reliable operation. Use it to replace a worn or broken bracket that allows components to shift or rattle. What it does:

• Provides a stable mounting point to secure internal parts and assemblies
• Prevents component movement that can cause noise, rubbing, or misalignment
• Helps maintain proper clearances to avoid intermittent contact or wear
• Restores secure fitment when the original bracket is cracked, bent, or missing

• One holder

• Disconnect power (and water, if applicable) before beginning any repair
• Typical installation requires basic hand tools; keep fasteners from the original part
• Inspect surrounding clips and fasteners and replace if damaged

This fixing kit contains the replacement mounting hardware needed to secure panels and components on compatible Bosch appliances, helping stop rattles and restore proper fit and alignment. What it does:

• Replaces worn or missing mounting clips and screws that hold panels or trim in place
• Helps stop rattling, vibration noise, and loose-fitting panels
• Restores secure attachment for access panels, trim, or other appliance components
• Useful when panels shift or won't sit flush after service or removal

• Disconnect power and/or water supply before beginning any repair
• Handle sharp edges and retain any original fasteners for reference
• Use proper tools and avoid overtightening screws to prevent damage
• Refer to the appliance's service manual or parts diagram for correct placement