She68tl5uc/02 Parts

This replacement dishwasher door handle restores a secure, easy-to-grip place to open and close the door, improving usability and appearance. Designed to match the original fit and mounting style for straightforward swap-out. What it does:

• Replaces a cracked, bent, or missing door handle so the door can be opened and closed safely
• Provides a solid grip to prevent slips and reduce stress on the door panel
• Restores factory appearance when the original handle is damaged or worn
• Helps prevent further cabinet or door edge damage from makeshift grips

• Disconnect power to the appliance before starting any repair to avoid injury
• Many installations require removing the inner door panel to access mounting screws; keep hardware organized
• Use basic hand tools (screwdriver, nut driver) and avoid overtightening fasteners to prevent damage

This replacement worm gear is a small plastic drive gear that transmits rotational motion between the motor and driven components, restoring normal gear-driven movement and reducing slipping or grinding. What it does:

• Transfers torque from the motor to the mating gear or gearbox for proper mechanical operation
• Replaces worn, stripped, or damaged worm teeth that cause slipping or loss of drive
• Stops grinding, clicking, or intermittent movement when the gear is the fault
• Helps restore smooth, consistent operation of the driven mechanism when installed correctly

• One worm gear

• Disconnect power to the appliance before beginning any repair
• Inspect mating gears and shafts for wear; replace worn parts to prevent repeat failure
• Use OEM-approved lubricant only where specified; do not force or overtighten mating components

This holder secures internal components to keep assemblies aligned and stable, reducing vibration and wear. It's a simple replacement that restores proper fit where a broken or missing clip causes loose panels or noisy operation. What it does

• Secures and aligns panels or wiring harnesses inside the appliance
• Prevents rattling, vibration, and misalignment caused by damaged or missing clips
• Helps maintain proper component spacing to avoid wear or interference
• Restores secure attachment after breakage or plastic fatigue

• Disconnect power and water before starting any repair
• Remove access panels or trim to reach the damaged clip—keep fasteners organized
• Press or snap the holder into place; replace any broken tabs before reassembling
• If plastic anchors are damaged, replace them with matching OEM clips

This electronic control board (control module programme) manages the appliance's cycle logic and user interface so the unit can run selected programs reliably. Replaces a faulty control for restoring normal cycle selection and operation. What it does:

• Interprets user commands and starts/stops cycles; corrects failures where the appliance is unresponsive to controls
• Controls timing, sensors, and actuator signals that enable proper wash/spin/dry sequences
• Common symptom fixes: appliance won't start, display errors or locked controls, cycles stop mid-run, or unresponsive buttons
• Works as the central PCB that communicates with other components (sensors, valves, motors)

• One control module programme (electronic control board)

• Disconnect power and water before beginning any repairs to avoid shock or injury
• Handle the board by edges and avoid static discharge; use ESD protection if available
• Reconnect all harnesses in their original positions; note connector locations before removal

The Outer Door is an OEM part for Bosch dishwashers. It serves as the protective outer layer of your dishwasher, providing a clean and polished appearance while also ensuring the safety of the internal components.

A bad outer door can occur due to wear and tear over time, accidental damage, or exposure to harsh cleaning agents. Signs of a faulty door include dents, scratches, or a loose fit that compromises the overall aesthetics and functionality of your dishwasher.

Symptoms of a bad outer door include:

• Visible dents, scratches, or damage
• Door not closing correctly

Replace your damaged or worn-out outer door with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Facia Panel is an OEM part for Bosch dishwashers. It is the front interface that houses the control buttons and display, allowing users to select washing cycles and monitor the operation of their dishwasher.  

Signs that you might need to replace the Facia Panel include unresponsiveness to button presses, fading or malfunctioning display lights, visible damage or cracks, and wear that affects the usability or visibility of the controls.

Symptoms of a bad Facia Panel include:

• Difficulty in selecting wash cycles or settings
• Inability to start the dishwasher due to unresponsive controls
• Partially or completely unlit display, making it hard to read the settings or status
• The dishwasher operating incorrectly due to input errors caused by faulty buttons or controls

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement hose clamp secures a hose to its fitting to maintain a tight, leak-resistant seal. Replacing a worn clamp helps stop drips and keeps fill, drain, or circulation lines firmly in place for reliable operation.

• Applies clamping force to hold a hose on a barb or stub connection
• Helps prevent leaks at hose joints
• Common symptoms: water leaking at a hose connection, hose slipping off, poor fill or drain performance
• Replace when the original is loose, corroded, distorted, or lost tension; also recommended when installing a new hose

• Disconnect power and shut off water supply before servicing
• Expect some residual water; protect the work area
• Note the clamp's position/orientation; use appropriate hand tools for the clamp style
• Ensure the hose is fully seated and clamp is secure; run a test cycle and check for leaks

This insulating part installs in the specified location to help reduce heat transfer between internal spaces and exterior panels. Replacing a worn or missing insulator helps protect nearby components and maintain proper operating temperatures.

• Provides a thermal barrier to limit heat transfer to surrounding panels and wiring
• Helps prevent scorching or heat damage to adjacent components
• Restores proper insulation where the original has deteriorated or is missing
• Common signs of failure: visible damage or fraying, burnt odor, or unusually hot exterior areas

• Disconnect power and allow the appliance to cool completely before servicing
• Wear gloves and eye protection; insulation fibers can irritate skin and eyes
• Match the original orientation/placement; do not over-compress the material
• Keep insulation clear of vents, heating elements, fans, and moving parts

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This holder/retainer secures its mating part in the correct position inside the appliance, preventing unwanted movement and ensuring consistent operation. Replace a cracked or missing holder to restore a solid, factory fit and reliable performance.

• Supports and locks the attached component or rack/accessory in place
• Helps prevent vibration, rattling, or misalignment during use
• Typical signs of failure: broken tabs, visible cracks, looseness, or the part no longer staying secured
• Restores proper positioning of the related component for consistent function

• Disconnect power at the breaker; shut off water supply if applicable
• Note the holder's orientation; take a photo before removal
• Reuse existing screws/fasteners if none are supplied with the part
• Seat fully until it clicks/locks; do not overtighten into plastic

This outer door is the dishwasher's front exterior panel that restores the unit's finished appearance and protects internal components from damage. Replacing a damaged door helps maintain proper door alignment and exterior protection. What it does:

• Serves as the dishwasher's front exterior panel and cosmetic cover.
• Protects inner door components, insulation, and wiring from impacts and moisture.
• Supports the door latch and helps keep the door aligned for proper closing.
• Replace if the door is dented, cracked, rusted, or causing poor fit or visible damage.

• Disconnect power and water supply before starting any repair.
• Door panels can be heavy or awkward—use a second person to lift and align.
• Handle edges carefully; trim or glass may be sharp.
• Transfer hinges, latch, insulation, and trim as required.

This insulating protection strip shields wiring and nearby components from heat and abrasion, helping maintain safe operation and prevent premature wear. It's a low-profile, heat-resistant sleeve used where wiring passes near hot appliance parts. What it does:

• Provides thermal and abrasion protection for wiring and small components
• Helps prevent shorting or insulation damage from heat exposure
• Reduces wear where wires contact sharp edges or moving parts
• Commonly used when replacing control or harness components near heat sources

• One insulating protection strip/sleeve as shown

• Only install with power disconnected and appliance fully cooled
• Position sleeve fully over exposed wiring or component and secure per OEM routing
• Inspect surrounding wiring and connectors for damage; replace any frayed insulation