She6ap06uc/06 Parts

The Mounting Bracket is an OEM component specifically designed for Bosch dishwashers. Rigid and durable, it securely anchors dishwashers to surrounding countertops and cabinetry during installation and use. Correct positioning by brackets streamlines plumbing and electrical connections.

Symptoms of a faulty mounting bracket can include shifts in the dishwasher's installed position or coming loose over time. Cracks or breaks inhibiting secure attachment necessitate replacement to ensure safety and compliance with installation standards.

Causes of a bad mounting bracket can involve stresses from frequent load shifting putting strain on attachment points. Impact incidents during installation introducing fracture risks also influence replacement needs to restore fully stable integration.

Symptoms of a bad mounting bracket include: 

• Movement or rocking of the dishwasher in its installed space
• Loose attachment enabling potential tripping hazards  
• Installation difficulties without the bracket in place

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. 
 

The Leveling Leg is an OEM replacement part for Bosch dishwashers. It permits adjustment to compensate for uneven floor surfaces, leveling the dishwasher, and ensuring proper drainage. Precise leveling facilitates water collection and effective cleaning performance. 

Symptoms of a bad leveling leg can include broken or stripped threads preventing adjustment, and conditions that promote rocking during operation. 

Causes of a bad leveling leg include:

• Loose or unstable mounting where legs spin freely  
• Legs unable to securely lock into position once adjusted   
• Drainage issues such as standing water or poor rinsing
• Excessive vibration or noise heard from the leveling area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.

• Fastens components to the appliance frame or assemblies
• Replaces a missing, stripped, or rusted original screw
• Helps reduce rattling or vibration from loose hardware
• Restores proper alignment of panels or brackets

• Disconnect power and shut off water before servicing
• Refer to your model's parts diagram to locate and place
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening

This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.

• Secures the toe-kick or lower access panel to the base/frame
• Restores proper fit when the original screw is lost or damaged
• Helps reduce panel rattles and vibration
• Maintains correct alignment and clearance at the bottom edge

• Disconnect power before servicing; also shut off the water supply
• Support the panel and align holes before threading the screw
• Start by hand to avoid cross-threading; tighten snugly—do not overtighten
• Verify size matches the original; replace matching hardware together if required by your model

The Water Inlet Fill Hose is an OEM part for Bosch dishwashers. This part is responsible for safely and efficiently connecting the dishwasher to your home's water supply, ensuring that water flows into the dishwasher at the correct pressure and volume for optimal cleaning performance. 

Over time, the Water Inlet Fill Hose can become susceptible to wear and tear, leaks and blockages.

Symptoms indicating the need for a new Water Inlet Fill Hose include:

• Water pooling around the dishwasher base, pointing to a potential leak in the hose.
• The dishwasher not filling with water properly, or filling very slowly, suggesting a blockage or damage to the hose.
• A visible inspection reveals cracks, bulges, or signs of corrosion on the hose connectors.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This factory fastener secures panels, brackets, or internal components in your appliance, helping keep assemblies tight and rattle-free. Replace missing or stripped screws to restore a secure fit and dependable operation.

• Fastens components to the appliance frame, chassis, or panel assemblies
• Helps maintain alignment and reduce vibration or rattling
• Replaces lost, rusted, or stripped screws during service
• Common signs it's needed: loose panel or handle, vibration noises, or parts that won't stay secured

• Disconnect power and shut off water or gas before servicing
• Match the screw's location and length to the original from your model
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver type/size specified for your model's screw head

This replacement screw secures appliance panels and internal brackets so components stay tight and aligned during everyday use. Replacing missing or stripped hardware restores a solid fit and helps minimize vibration and rattling.

• Fastens covers, panels, and brackets to their mounting points
• Helps maintain alignment of the attached component
• Reduces movement that can cause noise or wear
• Typical reasons to replace: missing screw, stripped head/threads, loose panel or bracket

• Disconnect power and, if applicable, shut off water before servicing
• Use the driver bit specified for your model; hand start threads to avoid cross-threading
• Tighten snugly without over-torquing to prevent stripping
• Replace screws one at a time to maintain alignment

The Hose Vent is an OEM part for Bosch dishwashers. It is responsible for venting excess heat, moisture, and odors generated during the washing process, ensuring a safe and suitable internal environment. The hose vent guides steam out of the appliance, preventing damage caused by pressure buildup. 

Symptoms of a bad hose vent include: 

• Visible damage or cracks along its length
• Kinks or depressions restricting airflow
• Disconnections from vent ports or dishwasher interior
• Excess moisture inside the dishwasher 

Causes of hose vent failure can be related to extended use over time, crushing/pinching from the installation environment, or buildup of debris affecting airflow.

This genuine Bosch replacement hose vent will restore proper moisture removal. It is compatible with some Siemens, Thermador, Gaggenau, and Kenmore models. Replace yours today for reliable venting performance.

This factory screw secures appliance components per the original design, helping stop looseness and vibration. Replace a missing, stripped, or corroded fastener to restore a solid, rattle-free fit and protect nearby parts from damage.

• Secures panels, brackets, or internal components as specified by the manufacturer
• Helps maintain proper alignment and reduces vibration or rattling
• Replace if the head is stripped, threads are damaged, or the screw is missing
• Common signs include loose or misaligned panels/trim and hardware that won't stay tight

• Disconnect power and turn off water or gas supply as applicable before servicing
• Match length and thread to the original; start by hand to avoid cross-threading
• Use the correct driver bit and tighten snugly without overtightening
• Retain any original washers, bushings, or clips used in the assembly

Tall item spray head.
This Spray Head is an OEM part for Bosch Dishwashers. It plays a role in distributing water evenly during the dishwasher's washing cycles. Continuous exposure to hard water, debris, or mineral deposits can cause issues with this component.

What Causes a Bad Spray Head:
Hard water deposits, debris, or mineral buildup can clog or block the spray head, affecting its performance. Physical damage can also impair its functionality.

Symptoms of a Bad Spray Head:

• Inadequate cleaning of dishes
• Uneven water distribution
• Reduced water pressure during washing cycles

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
 

This holder secures its mating component inside your appliance, keeping it correctly positioned and stable during operation. Replace a cracked, warped, or missing holder to restore proper support and prevent looseness, noise, or misalignment.

• Provides physical support for the intended part or panel
• Maintains correct position and alignment during operation
• Helps reduce vibration, rattling, or intermittent contact from a loose component
• Typical signs of failure: broken tabs, worn slots, missing piece, or a component that won't stay seated

• Disconnect power; if the appliance is water-connected, turn off the water supply before servicing
• Use your model's parts diagram to locate and orient
• Transfer and reuse original screws or clips as needed
• After installation, verify a secure fit and test operation

This stress relief is a small strain-relief clip that protects wiring where the harness passes through the cabinet, reducing pull and chafing on connections. Replacing a worn clip helps prevent loose wires and intermittent electrical issues. What it does:

• Secures the appliance wiring at an entry point to reduce strain on terminals and connectors.
• Prevents chafing and abrasion of wire insulation where harnesses pass through the cabinet or mounting openings.
• Can reduce symptoms such as intermittent power, flickering controls, or visible loose/frayed wires at the harness.
• Simple mechanical part: no electrical function but critical for long-term wiring reliability.

• Disconnect power (unplug appliance or switch off breaker) before accessing wiring; turn off gas supply where applicable.
• Remove panels as needed to access the harness entry; seat the clip fully so wires are routed through the relief, not pinched.
• Inspect surrounding wiring and replace any frayed or damaged wires; do not use the clip to conceal damaged wiring.

This seal creates a tight, leak-proof interface between mating components inside your appliance. Replacing a worn seal helps stop drips and protects nearby parts for reliable, leak-free operation.

• Forms a watertight barrier between connected parts
• Replaces cracked, flattened, or deformed sealing material that can leak
• Helps address puddling, dampness, or seepage around the unit
• Maintains proper performance and helps prevent water damage to surrounding components

• Disconnect power and shut off the water supply before servicing
• Access the sealed joint and note the original orientation and seating depth
• Clean mating surfaces; do not use sealants unless specified by the manufacturer
• Seat the new seal evenly; lightly lubricate with a water-safe lubricant and run a test cycle to check for leaks

White tray handle that restores a secure grip and smooth operation to your appliance's tray. Direct-fit replacement that matches the original handle's mounting points for an easy, reliable swap-out. What it does:

• Provides a secure grip for pulling out and pushing in the appliance tray.
• Stabilizes the tray to help prevent tipping or accidental drops when loaded.
• Addresses symptoms like cracked, broken, loose, or missing handle that make the tray hard to open.
• Matches the original shape and mounting locations for proper fit and function.

• Disconnect power at the breaker or unplug the appliance before working near electrical components.
• Remove the tray or rack as needed to access mounting screws or clips; retain original hardware unless replacement hardware is specified.
• Align the handle with the mounting points and secure using the existing screws/clips; avoid over-tightening to prevent damage.

The Dishwasher Inner Door Panel is an OEM part for Bosch dishwashers. It is located inside the dishwasher door and protects internal components. 

Symptoms of a bad inner door panel include:

• Scratches, cracks, or damage impairing the appearance of the door interior
• Loose screws or mounting points causing rattling 
• Difficulty closing or sealing the door properly

Causes of a bad inner door panel can include prolonged exposure to heat and steam, damage from impact or mishandling of dishes, or normal wear over time compromising the integrity of the panel. 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Insulating Part is an OEM component specifically designed for Bosch dishwashers. This part plays an important insulating and sealing role, helping to keep heat and moisture contained within certain areas of the dishwasher. 

Causes of a bad insulating part can include damage or wear over time that compromises its insulating and sealing abilities. Cracks, tears, or compression of the insulating material are signs it needs replacement.

Symptoms of a bad insulating part include:

• Inefficient washing and drying performance due to loss of heat and moisture
• Higher energy costs as the dishwasher works harder to achieve the proper temperatures
• Dripping or pooling of water outside the intended areas  

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace yours today and restore your dishwasher's optimal insulation and seal.