Shem63w52n/13 Parts

The Check Valve is an OEM part for Bosch dishwashers. This component prevents dirty water from flowing back into the dishwasher from the drain hose, ensuring that the dishwasher maintains proper hygiene and efficient cleaning cycles. It is installed in the drain pump and plays a crucial role in the overall drainage system of the dishwasher.

Causes of a bad check valve can include wear and tear from regular use, accumulation of debris or mineral deposits, or damage from improper installation or handling. A faulty check valve can lead to issues with draining and water contamination within the dishwasher.

Symptoms of a bad check valve include:

• Water not draining properly from the dishwasher
• Dirty water backing up into the dishwasher
• Unusual noises during the drain cycle
• Dishwasher cycles taking longer than usual

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Sump is an OEM part for Bosch dishwashers. It is located at the bottom of the dishwasher's tub, responsible for filtering and recirculating water during the wash cycle. The sump is designed to collect and filter out food particles and debris from the water, ensuring that only clean water is circulated throughout the dishwasher. It also houses the circulation pump, which propels the water through the spray arms to effectively clean your dishes.

A bad sump can occur due to clogs, damage, or wear and tear over time. Signs of a faulty sump include poor cleaning performance, water not draining properly, or unusual noises during operation.

Symptoms of a bad sump include:

• Food particles or residue left on dishes
• Water not draining properly 
• Unusual noises during operation

Replace your faulty dishwasher sump with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This support is a factory replacement component that holds and stabilizes a specific part within your appliance so it stays aligned and secure. Replacing a cracked or missing support restores proper fit and helps prevent noise or binding.

• Provides structural support and alignment for the designated component
• Keeps parts seated securely to minimize movement and vibration during use
• A damaged or missing support can cause looseness, rattling, sagging, or misalignment
• Restores proper fit and function when the original is cracked, warped, or broken

• Disconnect power and shut off any gas/water supplies before servicing
• Refer to your model's parts diagram to identify location and orientation
• Install using the appliance's existing screws or clips; avoid overtightening to prevent damage
• Wear cut-resistant gloves; beware of sharp edges and pinch points

This factory fastener secures panels, brackets, and internal components in your appliance. Replacing a missing or damaged screw restores a snug fit, reduces vibration and rattles, and keeps assemblies properly aligned during service or reassembly.

• Anchors panels, trim, and internal parts to the appliance frame or subassemblies
• Helps prevent vibration, buzzing, and loose or shifting components
• Ideal replacement for lost, stripped, or corroded hardware
• Common symptoms include loose panels, gaps, rattling noises, or parts that won't stay secured

• Disconnect power and shut off water or gas before servicing
• Match this screw to the original and replace one-for-one in the same location
• Start threads by hand to avoid cross-threading; use the correct driver and do not overtighten
• Inspect the mating clip/insert; replace if stripped or damaged for a secure hold

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This push button set replaces damaged or worn control-panel buttons to restore reliable tactile input and clean appearance for compatible Bosch appliances. Ideal when buttons are cracked, faded, or sticking. What it does:

• Replaces the physical push-buttons used to select functions on the control panel
• Restores proper tactile feedback so controls register reliably
• Addresses symptoms such as buttons that stick, feel loose, or show heavy wear
• Improves appearance of a scratched, faded, or broken control surface

• One push button set

• Disconnect power to the appliance before beginning any work
• Replacement is typically a snap-in or screw-secured trim-panel change; have a small screwdriver or nut driver available
• Handle plastic parts carefully to avoid breaking tabs; align buttons before reassembly
• Test button function with power restored before finishing reassembly

This push button set replaces worn, broken, or missing control panel buttons to restore tactile control of the appliance. Designed to match the OEM shape and feel for reliable button actuation and a clean appearance. What it does

• Replaces damaged or missing control panel push buttons so selections register correctly.
• Restores tactile feedback when buttons are pressed; helps prevent missed or double inputs.
• Helps stop buttons from sticking or catching on the control bezel.
• Useful when cosmetic wear makes labels hard to read or buttons no longer depress smoothly.

• Disconnect power before servicing to avoid shock or unintended appliance operation.
• Typically snaps into the control panel bezel; may require removal of the console or trim.
• Handle buttons gently to avoid bending plastic tabs; confirm correct orientation before seating.

The Insert is an OEM component specifically designed for select Bosch dishwashers. Located inside the tub basin, the tines provide the necessary friction to help clean dishes. 

Causes of a bad insert can include mineral buildup that prevents proper movement or damage from dropped utensils that have bent the tines out of place.

Symptoms of a bad insert include:

• Dishes still feeling dirty after the wash cycle   
• Rust or mineral deposits visible on the tines
• Tines that are bent or missing which reduces cleaning surface area

Replacing the insert with this OEM Bosch part restores optimal cleaning performance. Compatible with 300 series models, it features stainless steel construction that withstands corrosion from detergents. This replacement insert is warranted to perform as the original Bosch design for reliable dish cleaning.
 

The Dishrack Roller is an OEM replacement part for Bosch dishwashers. Located inside the tub, this roller assists with moving upper and lower dishracks in and out during operation. 

Causes of failure are prolonged exposure to detergent residues combined with repeated rolling impact stresses absorbing dishrack weight for tens of thousands of cycles.

Symptoms of a worn or damaged dishrack roller include:  

• Difficulty fully extending or retracting dishrack shelves  
• Rack skew or tilting sideways instead of moving smoothly
• Grinding or scraping noises heard from the tub area  
• Dishes not lining up properly to receive spray patterns

This genuine Bosch roller is also compatible with Thermador and Gaggenau models.