Shp65t52uc Parts

The Dishwasher Water Inlet Valve is an OEM part for Bosch dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle.  

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Detergent Dispenser is an OEM replacement part for Bosch dishwashers. It is located inside the dishwasher and is responsible for properly delivering detergent at the appropriate time during wash cycles. The detergent dispenser has a compartment that holds detergent tablets or pods, and a mechanism that releases the correct amount to efficiently clean dishes.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad detergent dispenser include:

• Detergent not dispensing or residue left in the dispenser
• Dirty dishes due to insufficient or improper detergent delivery
• Corrosion or buildup inside the dispenser area
• Dispenser door or cover cracked or damaged

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This facia panel is the finished front cover that restores the dishwasher's appearance and protects the control area. Replacing a cracked or damaged facia returns a clean, finished look and helps shield internal components from debris. What it does:

• Provides the finished front surface and cosmetic cover for the dishwasher door/control area.
• Protects controls, wiring and connectors behind the door from moisture and debris.
• Replaces cracked, dented or heavily scratched facia that detracts from the appliance's appearance.
• Helps maintain proper alignment of trim and covers that sit at the front of the door.

• Disconnect power to the appliance before servicing to avoid shock or damage.
• Removal typically requires opening the door and removing screws or clips from the inner door panel; follow the model-specific service instructions.
• Handle clips and mounting tabs carefully to avoid breakage; reuse existing hardware if undamaged.

This replacement control panel button restores a worn, broken or missing push button so your appliance's controls can be operated easily and reliably. It matches the original shape and snap-fit for a clean finish. What it does

• Acts as the user interface button on the appliance control panel for selecting cycles or features
• Replaces cracked, stripped, loose or missing buttons that won't depress or return properly
• Helps restore tactile feedback and proper button travel for responsive control input
• Prevents debris and moisture from entering the switch area when installed correctly

• Replacement control panel button (single)

• Power off and disconnect the appliance before attempting any repair
• Typically installs by snapping into the control panel; access may require removal of the front panel or control console
• Avoid forcing the part; align tabs and press evenly until it clicks into place
• If the underlying switch or actuator is damaged, replace both components to ensure proper function

The Insert is an OEM component specifically designed for select Bosch dishwashers. Located inside the tub basin, the tines provide the necessary friction to help clean dishes. 

Causes of a bad insert can include mineral buildup that prevents proper movement or damage from dropped utensils that have bent the tines out of place.

Symptoms of a bad insert include:

• Dishes still feeling dirty after the wash cycle   
• Rust or mineral deposits visible on the tines
• Tines that are bent or missing which reduces cleaning surface area

Replacing the insert with this OEM Bosch part restores optimal cleaning performance. Compatible with 300 series models, it features stainless steel construction that withstands corrosion from detergents. This replacement insert is warranted to perform as the original Bosch design for reliable dish cleaning.
 

This Bosch Dishwasher Insert is an OEM part for Bosch dishwashers, specifically designed to enhance the interior functionality of your appliance. The insert is a vital component that aids in the organization and secure placement of dishes, utensils, and other items during the wash cycle.

Common causes of damage to a dishwasher insert include physical strain from overloading, exposure to high temperatures and harsh detergents, and general wear and tear. These factors can lead to warping, cracking, or the breakdown of the insert's structure.

Symptoms of a bad insert include:

• Difficulty in fitting dishes and utensils properly.
• Reduced cleaning effectiveness due to improper loading.
• Noticeable cracks, warps, or breakage in the insert structure.
• Loose or unstable compartments within the insert.
• Difficulty in sliding or securing the insert inside the dishwasher.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.