Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This is a fan motor assembly used in the dishwasher's drying system, typically associated with a zeolite-based drying mechanism. It circulates air through the drying system to help remove moisture from dishes after the wash cycle. Replace this fan motor if your dishwasher is no longer drying dishes effectively, you hear unusual noises during the drying phase, or the fan fails to run.
Replaced fan motor After motor was ordered found spray arm had a hole in it, had to then place a 2nd order Also ordered lower rack (old one was rusting) Read more
Support bracket that secures the toe panel at the bottom front of your dishwasher. Replace if broken, missing, or damaged from impact or wear.
Ordered replacement parts from AP diagram Read more
Secures the door spring in place on your dishwasher. Replace if cracked, broken, or missing to restore proper door tension and balance for smooth operation.
I went on your very user friendly website and looked up my bosch dishwasher. I love your diagrams and I felt confident that I could figure out what we possibly needed to get the door to close correctly and get the washer back working again. Your staff is courteous, service was fast and I would definitely recommend Appliance Parts Pros. Read more
Secures adjustable tines in the dishwasher rack to keep dishes stable during wash cycles. Replace if cracked, broken, or missing to restore proper rack function.
Replaced worn parts and new rollers dishwasher works like new. The diagram on the parts website helped me order the right parts. Read more
Replacement door hinge plate for dishwashers. Secures the door to the cabinet frame. Replace if cracked, bent, warped, or broken from impact or wear.
Screens out small food particles from wash water to prevent debris recirculation. Replace when clogged or mineral-crusted. Confirm fit by model number.
Googled model and error on the dishwasher and went to Appliance Parts Pro site and not only had the part but showed a video on how to repair it. Ordered the part and only took a couple of minutes to change out the old and put in the new. Parts arrived in two days. Amazing. Saved me calling a repair person. Read more
Fix E15 error code or water tap light on your dishwasher. The float housing detects water levels in the tub. Moderate DIY repair, typically 30-45 minutes.
Found your very helpful videos. I removed and replaced the float and the switch. Seems to have done the job. Read more
The Sealing is an OEM part for Bosch dishwashers. It serves as a protective barrier between the control panel and the internal components of the dishwasher, preventing moisture and dust from entering and causing damage.
A bad sealing can occur due to wear and tear, exposure to moisture, or accidental damage. Signs of a faulty sealing include water seeping into the control panel, visible cracks or gaps, or a loose fit.
Symptoms of a bad sealing include:
Replace your damaged or worn-out sealing with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
I replaced the controller, the thin seal @ the top and the cable in the door and has seemed to resolve the issue. I removed the three screws that were in the upper part of the door handle slot and took out the inner panel screws on the door. No need to take the screws for the hinges out. The door will spring shut once you take the inner panel off so be careful. You'll need a Torx screwdriver Read more
Replaces cracked, dented, or worn dishwasher outer door panel. Exterior cover installs on the front of the dishwasher door. Handle sold separately.
Did a on line chat with the model number ordered a replacement door panel & swapped them out Read more
Secures the dishwasher door to the cabinet on the left side. Replace if cracked, bent, or damaged from stress or impact causing misalignment or poor fit.
Sound-dampening insulation panel that installs between the dishwasher tub and outer door. Replace if missing, damaged, or worn for proper noise reduction.
Following an 8-month long rehab of our kitchen, we found that some key parts of the dishwasher were missing once it was reinstalled. I researched the part numbers on the Bosch website and plugged them in to the AppliancePartsPros.com website and they came right up. The order arrived in a couple of days and installation just took a few minutes. Happy to have our dishwasher back to looking as good as our new kitchen! Read more
Dishwasher won't power on or trips breaker? This power cord connects your dishwasher to the electrical outlet. Straightforward installation.
Replaces sliding rails that support and guide the upper dishrack along tub sidewalls. Needed when rails are cracked, worn, or broken causing binding.
I only needed a flat head screwdriver to remove the clips holding the parts in. It took all of 10 minutes and the dish washer is running great now. Read more
The Auxiliary Tool is an OEM part for Bosch dishwashers. This specialized tool is designed to assist with the removal and replacement of the metal nut found on the zeolite container or filter housing.
Proper maintenance such as routinely replacing the zeolite container is important for keeping a Bosch dishwasher operating at peak performance. The zeolite acts as a water softener that reduces water hardness and aids in the cleaning process. Over time, the zeolite container will need replacement as it collects soil and contaminants.
Causes of needing to replace the metal nut can include wear and tear from repeated container changes or damage that prevents the nut from sealing properly.
Symptoms of a bad nut include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Kept getting water in the water pan of my Bosch 800 dishwasher. Appliance company wanted $1000 to change out an entire pump system. I determined the leak was from this nut and seal. Replaced and no more water! Read more
Seals the sump area to prevent leaks and ensure proper water circulation and drainage. Replace if cracked, warped, or missing. Verify fit with your model.
I searched for the problem online and found the video. It was direct and straightforward, so I just bought the parts without shopping elsewhere. . I replaced the Lid and Cover (which was missing) in the drain assembly and it’s back to normal Read more
Detergent releasing too early or leaking from the dispenser? This seal creates a watertight barrier to prevent premature dissolution. Easy 10-minute fix.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.