Shp878zd5n Parts

This insulating part provides protective thermal and electrical insulation for internal appliance components, helping keep wiring and nearby parts separated and shielded. Replacing a damaged insulator restores safe spacing and reduces heat-related wear. What it does:

• Provides thermal and electrical isolation between components to help prevent heat transfer and accidental contact
• Protects wiring and nearby parts from chafing and abrasion
• Helps reduce risk of shorts or intermittent electrical faults when insulation is intact
• Common symptoms of a bad or missing insulator: visible damage, melting or scorch marks, exposed wiring, or intermittent operation

• Disconnect power to the appliance before servicing to avoid electric shock
• Remove any necessary panels to access the damaged insulator
• Handle carefully to avoid tearing or compressing the material; replace with the identical part number

This sealing gasket replaces a worn or damaged seal to restore a watertight connection and help prevent leaks. It's a direct-fit replacement designed to maintain proper sealing where the original gasket has failed. What it does:

• Creates a watertight seal at the intended joint to prevent water or air leaks
• Restores proper component fit and alignment when the old seal is cracked, compressed, or brittle
• Helps reduce symptoms like visible leaking, moisture buildup, or poor performance related to a failed seal
• Works with the original mating surfaces—replace damaged seals to avoid secondary damage

• One sealing gasket

• Inspect mating surfaces and clean thoroughly before installing the new seal
• Replace only with the matching part number to ensure correct fit; do not stretch or force the gasket into place
• Wear gloves and follow all appliance power/water isolation procedures before starting repairs

This replacement cover restores the appliance's protective access panel, keeping internal components shielded from dust, moisture, and accidental contact. It helps maintain safe operation and a finished appearance after service. What it does:

• Covers and protects internal components and wiring behind the access area
• Helps prevent debris and moisture from entering sensitive parts
• Restores the appliance's finished look after repairs or part replacement
• Provides a secure barrier to reduce accidental contact during inspection or maintenance

• One replacement cover

• Disconnect power and water before starting any work
• Remove any fasteners or clips holding the old cover; align and secure the new cover using the original hardware
• If clips or screws are damaged, replace them with OEM-equivalent fasteners

This cable harness routes power and signals between appliance control and components to restore reliable electrical connections. It replaces a damaged or worn harness to help eliminate intermittent operation and connectivity issues. What it does:

• Replaces the main wiring harness that links controls, sensors, and motors for proper electrical communication
• Restores reliable power and signal paths to correct intermittent power, non-responsive controls, or components that won't run
• Ensures secure connector mating to prevent arcing and poor contact
• Matches OEM connector types and wire lengths to fit in the original routing

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock
• Compare the new harness to the old one for connector types and routing before installation
• Handle connectors by the housings; do not pull on wires. Ensure all plugs snap fully into place

This ventilation duct is the in-line connector that channels exhaust air from the appliance to the house vent, helping maintain proper airflow and reduce back-drafting. Designed to fit compatible Bosch ventilation assemblies. What it does:

• Routes exhaust air from the appliance to the home vent or hood exhaust system.
• Replaces damaged, bent, or disconnected ducting that can restrict airflow.
• Helps reduce odors and heat buildup by restoring a clear exhaust pathway.
• Works as a direct replacement part where the OEM duct is specified.

• One ventilation duct/duct connector as shown.

• Turn off power to the appliance and ensure the unit is cool before servicing.
• Inspect surrounding seals and fasteners; replace any damaged clamps or gaskets separately.
• Slide or fasten the duct into place and secure with appropriate clamps; ensure a tight, unobstructed path.

This insulating part provides a thermal and electrical barrier to protect nearby components and wiring from heat and to help reduce vibration-related contact. It's a simple replacement that restores safe spacing and insulation. What it does:

• Acts as a heat shield to limit heat transfer to adjacent parts and wiring
• Provides electrical insulation to prevent shorting where components are close
• Helps reduce rattling by stabilizing/isolating panels or components
• Supports proper component spacing for safe operation

• Disconnect power to the appliance before starting any repair
• Replace only in the exact original location and orientation
• Handle gently to avoid tearing or compressing the material
• If mounting hardware is damaged or missing, replace hardware per OEM instructions

This replacement insert is a small interior mounting piece that helps secure and align appliance components for reliable operation and a finished appearance. It restores proper fit where worn, loose, or damaged inserts allow rattling or misalignment. What it does:

• Provides a stable mounting or seating surface for adjacent components
• Reduces movement, vibration, or rattling caused by a damaged insert
• Helps maintain proper alignment that supports normal operation of the assembly
• Can prevent further wear to surrounding trim or mounting points when replaced

• One insert

• High-level replacement; typically accessed from the appliance interior
• Use basic hand tools; avoid force that could break surrounding plastic or trim
• Disconnect power (and water for dishwashers) before servicing to reduce shock and injury risk

This replacement frame restores the appliance's front cabinet trim for a clean, finished appearance and helps secure the control panel and door assembly. It's a direct-fit exterior trim piece designed to return proper alignment and protection. What it does

• Provides structural support and alignment for the front panel and control area
• Covers and protects internal edges from dirt, moisture, and impact
• Helps stop rattling or vibration caused by a warped or damaged trim
• Common symptom: visible damage, cracks, loose or misaligned front trim

• Remove power to the appliance before starting work to avoid electrical shock
• Small hand tools typically required; follow OEM disassembly sequence for access
• Handle trim carefully to avoid scratches; use a soft surface to rest parts
• If clips or screws appear damaged, replace them separately.

This insulating protection strip shields wiring and nearby components from heat and abrasion, helping maintain safe operation and prevent premature wear. It's a low-profile, heat-resistant sleeve used where wiring passes near hot appliance parts. What it does:

• Provides thermal and abrasion protection for wiring and small components
• Helps prevent shorting or insulation damage from heat exposure
• Reduces wear where wires contact sharp edges or moving parts
• Commonly used when replacing control or harness components near heat sources

• One insulating protection strip/sleeve as shown

• Only install with power disconnected and appliance fully cooled
• Position sleeve fully over exposed wiring or component and secure per OEM routing
• Inspect surrounding wiring and connectors for damage; replace any frayed insulation

This is a replacement screw used to secure panels, trim pieces, and small brackets on compatible Bosch appliances — a simple hardware fix that restores proper fit and stops rattling or loose parts. What it does:

• Fastens outer panels, control bezels, or internal brackets to the appliance chassis
• Keeps panels aligned so doors and controls fit and operate correctly
• Stops vibration noise caused by loose or missing fasteners
• Replaces damaged, stripped, or corroded screws

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand to start, then snug; avoid over-tightening which can strip threads or crack panels
• If threads are damaged, replace the mating nut or threaded insert per OEM guidance

This insulating part helps reduce heat transfer and dampen noise inside the appliance, protecting nearby components and improving thermal stability during operation. It replaces worn or missing insulation to help maintain proper performance. What it does:

• Provides thermal insulation to limit heat reaching adjacent components
• Dampens vibration and reduces operational noise
• Helps protect wiring and electronics from heat exposure
• Restores proper clearance and sealing where insulation is required

• Disconnect power and water before starting any repair
• Remove access panels as needed to reach the old insulation; keep track of fasteners
• Position the replacement part exactly as the original, ensuring any adhesive or clips are engaged
• If adhesive backing is required, use only OEM-recommended materials; for torque and placement details