Shpm65n55/01 Parts

This push button set replaces worn, broken, or missing control-panel buttons so you can reliably operate appliance functions and restore the original look of the control area. Matches the OEM button layout and feel. What it does:

• Replaces cracked, loose, or missing push buttons on the control panel
• Restores tactile response for menu, cycle, and option selections
• Helps stop sticking or intermittent button contact that prevents function selection
• Returns the control panel to a finished, factory appearance

• Disconnect power to the appliance before starting any repairs
• Remove the console or control panel per the model's service instructions to access the button assembly
• Handle the button set and ribbon/connector gently to avoid damage

The Dishwasher Installation Set is an OEM part for Bosch dishwashers. This set contains all necessary hardware for professional installation or replacement, including leveling legs, mounting brackets and anti-tip brackets. Manufactured from corrosion-resistant steel, these parts securely fasten the dishwasher into place.

Causes relate to normal wear over time from use. Improper original installation may also compromise individual parts. Failing to properly level, brace or anchor the dishwasher leads to unnecessary stresses.

Symptoms of worn or missing installation hardware include:

• Looseness, shaking or movement during operation
• Doors failing to properly self-close or seal fully
• Leaks developing around dishwasher connections
• Installation not compliant with current regulations

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This push button set replaces worn or broken control-panel buttons to restore reliable manual control and a finished appearance. Designed for straightforward swap-in replacement on compatible Bosch appliances. What it does:

• Replaces damaged or missing push buttons on the control panel
• Restores tactile feedback and accurate button actuation
• Helps prevent unintended operation from stuck or cracked buttons
• Improves the appliance's cosmetic appearance at the user interface

• One push button set

• Disconnect power to the appliance before beginning any service
• Generally installs from the front of the control panel; some panels may require removing trim or access panels
• Handle plastic parts carefully to avoid breaking tabs or clips

This cover is a replacement protective housing piece that shields internal components and wiring from debris and moisture, helping maintain safe operation and component longevity. It restores the appliance's original enclosure where the panel is damaged or missing. What it does:

• Protects electrical parts and connectors from dust, water, and physical contact
• Helps prevent short circuits and arcing caused by exposed wiring
• Reduces vibration-related noise by securing adjacent components
• Restores proper fit and finish to the appliance exterior

• One replacement cover as shown

• Disconnect power (unplug or switch off breaker) before beginning any work
• Use basic hand tools; avoid overtightening fasteners or forcing clips
• Inspect surrounding seals and wiring while panel is removed; replace damaged parts as needed

This replacement hose clamp secures a hose to its fitting to maintain a tight, leak-resistant seal. Replacing a worn clamp helps stop drips and keeps fill, drain, or circulation lines firmly in place for reliable operation.

• Applies clamping force to hold a hose on a barb or stub connection
• Helps prevent leaks at hose joints
• Common symptoms: water leaking at a hose connection, hose slipping off, poor fill or drain performance
• Replace when the original is loose, corroded, distorted, or lost tension; also recommended when installing a new hose

• Disconnect power and shut off water supply before servicing
• Expect some residual water; protect the work area
• Note the clamp's position/orientation; use appropriate hand tools for the clamp style
• Ensure the hose is fully seated and clamp is secure; run a test cycle and check for leaks

This insulating part installs in the specified location to help reduce heat transfer between internal spaces and exterior panels. Replacing a worn or missing insulator helps protect nearby components and maintain proper operating temperatures.

• Provides a thermal barrier to limit heat transfer to surrounding panels and wiring
• Helps prevent scorching or heat damage to adjacent components
• Restores proper insulation where the original has deteriorated or is missing
• Common signs of failure: visible damage or fraying, burnt odor, or unusually hot exterior areas

• Disconnect power and allow the appliance to cool completely before servicing
• Wear gloves and eye protection; insulation fibers can irritate skin and eyes
• Match the original orientation/placement; do not over-compress the material
• Keep insulation clear of vents, heating elements, fans, and moving parts

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

This replacement outer door restores the finished exterior of the appliance door, protecting inner components and bringing back a clean, secure fit when the original is damaged or missing. It's also known as the outer door panel/skin. What it does

• Provides the exterior surface of the door and mounting points for trim or handle (model dependent)
• Shields the inner door assembly from impacts and wear
• Helps maintain proper door alignment and smooth operation
• Common symptoms: dents, cracks, broken tabs, loose or rattling door panel

• One outer door

• Disconnect power before servicing; wear cut-resistant gloves
• Open the door and support the panel while removing perimeter fasteners
• Transfer any reusable hardware, trim, or insulation from the old panel as needed
• Reinstall fasteners without overtightening and verify door alignment and operation

This holder/retainer secures its mating part in the correct position inside the appliance, preventing unwanted movement and ensuring consistent operation. Replace a cracked or missing holder to restore a solid, factory fit and reliable performance.

• Supports and locks the attached component or rack/accessory in place
• Helps prevent vibration, rattling, or misalignment during use
• Typical signs of failure: broken tabs, visible cracks, looseness, or the part no longer staying secured
• Restores proper positioning of the related component for consistent function

• Disconnect power at the breaker; shut off water supply if applicable
• Note the holder's orientation; take a photo before removal
• Reuse existing screws/fasteners if none are supplied with the part
• Seat fully until it clicks/locks; do not overtighten into plastic

This cable harness routes power and signals between appliance control and components to restore reliable electrical connections. It replaces a damaged or worn harness to help eliminate intermittent operation and connectivity issues. What it does:

• Replaces the main wiring harness that links controls, sensors, and motors for proper electrical communication
• Restores reliable power and signal paths to correct intermittent power, non-responsive controls, or components that won't run
• Ensures secure connector mating to prevent arcing and poor contact
• Matches OEM connector types and wire lengths to fit in the original routing

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock
• Compare the new harness to the old one for connector types and routing before installation
• Handle connectors by the housings; do not pull on wires. Ensure all plugs snap fully into place

This genuine replacement spring restores the proper return force and smooth movement of the connected mechanism in your appliance. Replacing a worn or broken spring helps the assembly operate consistently and return to position as designed. What it does

• Provides the return/tension force for the associated lever, latch, or hinge mechanism
• Helps the mechanism move smoothly and maintain correct alignment
• Direct replacement for a stretched, weakened, or broken spring
• Common symptoms: weak or inconsistent tension, sticking or failure to return, uneven feel, or visible spring damage

• Includes: Spring

• Disconnect power before service; also shut off water supply
• Note the original routing/orientation and take a reference photo before removal
• Control tension with needle-nose pliers; wear gloves and eye protection
• If the mechanism uses matched springs in pairs, replace both to keep balanced tension