Shpm78w56n/11 Parts

The Detergent Dispenser is an OEM replacement part for Bosch dishwashers. It is located inside the dishwasher and is responsible for properly delivering detergent at the appropriate time during wash cycles. The detergent dispenser has a compartment that holds detergent tablets or pods, and a mechanism that releases the correct amount to efficiently clean dishes.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad detergent dispenser include:

• Detergent not dispensing or residue left in the dispenser
• Dirty dishes due to insufficient or improper detergent delivery
• Corrosion or buildup inside the dispenser area
• Dispenser door or cover cracked or damaged

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Spray Head is an OEM replacement part for Bosch dishwashers. It directs pressurized water along the dish racks, targeting every inch of dishware and cookware. Consistent coverage cleans thoroughly without waste.   

Symptoms of a bad spray head can include clogged nozzles, inconsistent patterns, or spray heads that do not oscillate and rotate properly through cycles. Mineral deposits pose blockage risks over time.

Causes of a bad spray head include:

• Uneven or skipped areas of spray coverage inside the machine
• Rotating/oscillating mechanisms that jam or continuously stick  
• Nozzles fully or partially blocked reducing water pressure
• Head assembly detaching from water tub wall or bracket

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This outer door panel restores the dishwasher's front appearance and protects internal door components from damage and moisture. It provides a clean finish and supports mounting for trim and hardware when in good condition. What it does:

• Covers and protects the inner door assembly from water, dirt and everyday wear.
• Provides the finished exterior surface and attachment point for the handle/trim hardware.
• Helps maintain proper door alignment and sealing when not dented or warped.
• Common symptoms: visible dents, scratches, rust or a damaged exterior that affects appearance or function.

• Disconnect power to the appliance before beginning any work.
• Remove the inner door trim and retain all fasteners; some components may need to be transferred to the new panel.
• Handle the panel carefully — it can be awkward and may have sharp edges.
• If seals, insulation, or trim are damaged, replace or re-seat them during reassembly; test the door for proper fit and operation after installation.

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

The Operating module PRO is the electronic control board that manages user controls and oven functions, restoring responsive touch/display operation and reliable command processing for compatible Bosch cooking appliances. What it does

• Replaces the main control board that interprets user inputs and runs oven control logic.
• Restores responsive touchpad/display behavior when controls are unresponsive or erratic.
• Resolves symptoms like blank or frozen display, unresponsive buttons, or incorrect oven cycles.
• Works with associated wiring harnesses and sensors to coordinate heating, timers, and status feedback.

• Disconnect power at the household breaker before starting any repair to avoid shock.
• Handle the board by the edges and avoid static discharge; use a grounded strap if available.
• Verify connector alignment and seating; do not force pins or terminals.

This insulating part is a molded insulator that protects nearby components by reducing heat transfer and providing electrical isolation, helping prevent heat damage and short circuits for safer, more reliable appliance operation. What it does:

• Provides thermal insulation to limit heat transfer from hot components to surrounding parts
• Offers electrical isolation to help prevent shorts between conductors or grounded metal
• Maintains proper spacing and support for wiring or small assemblies
• Helps prevent symptoms such as scorch marks, melted wiring insulation, burning smells, or intermittent electrical behavior

• Disconnect power to the appliance before attempting any repair
• Inspect the surrounding area and the old insulator's location and orientation before removal
• Replace with the same part and orientation; avoid compressing or deforming the insulator

The Insert is an OEM component specifically designed for select Bosch dishwashers. Located inside the tub basin, the tines provide the necessary friction to help clean dishes. 

Causes of a bad insert can include mineral buildup that prevents proper movement or damage from dropped utensils that have bent the tines out of place.

Symptoms of a bad insert include:

• Dishes still feeling dirty after the wash cycle   
• Rust or mineral deposits visible on the tines
• Tines that are bent or missing which reduces cleaning surface area

Replacing the insert with this OEM Bosch part restores optimal cleaning performance. Compatible with 300 series models, it features stainless steel construction that withstands corrosion from detergents. This replacement insert is warranted to perform as the original Bosch design for reliable dish cleaning.
 

This Bosch Dishwasher Insert is an OEM part for Bosch dishwashers, specifically designed to enhance the interior functionality of your appliance. The insert is a vital component that aids in the organization and secure placement of dishes, utensils, and other items during the wash cycle.

Common causes of damage to a dishwasher insert include physical strain from overloading, exposure to high temperatures and harsh detergents, and general wear and tear. These factors can lead to warping, cracking, or the breakdown of the insert's structure.

Symptoms of a bad insert include:

• Difficulty in fitting dishes and utensils properly.
• Reduced cleaning effectiveness due to improper loading.
• Noticeable cracks, warps, or breakage in the insert structure.
• Loose or unstable compartments within the insert.
• Difficulty in sliding or securing the insert inside the dishwasher.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

Left side

The Dishrack Slide Rail is an OEM part for Bosch dishwashers. This part provides the metallic rails that the dish racks smoothly glide along during loading and unloading. Its precision-engineered design facilitates quiet and reliable extension and retraction of racks for easy access to washed items.

Causes of a bad Dishrack Slide Rail out include wear from continual use and damaging rails or their components over time. Damage from impacts or weight could also diminish rack movement.

Symptoms of issues include:

• Difficulty fully extending or retracing the racks
• Noisy, grinding rack operation
• Racks that do not smoothly slide or become stuck partially out

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.