Shs5av52uc Parts

The Detergent Dispenser is an OEM replacement part for Bosch dishwashers. It is located inside the dishwasher and is responsible for properly delivering detergent at the appropriate time during wash cycles. The detergent dispenser has a compartment that holds detergent tablets or pods, and a mechanism that releases the correct amount to efficiently clean dishes.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad detergent dispenser include:

• Detergent not dispensing or residue left in the dispenser
• Dirty dishes due to insufficient or improper detergent delivery
• Corrosion or buildup inside the dispenser area
• Dispenser door or cover cracked or damaged

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This stress relief is a small strain-relief clip that protects wiring where the harness passes through the cabinet, reducing pull and chafing on connections. Replacing a worn clip helps prevent loose wires and intermittent electrical issues. What it does:

• Secures the appliance wiring at an entry point to reduce strain on terminals and connectors.
• Prevents chafing and abrasion of wire insulation where harnesses pass through the cabinet or mounting openings.
• Can reduce symptoms such as intermittent power, flickering controls, or visible loose/frayed wires at the harness.
• Simple mechanical part: no electrical function but critical for long-term wiring reliability.

• Disconnect power (unplug appliance or switch off breaker) before accessing wiring; turn off gas supply where applicable.
• Remove panels as needed to access the harness entry; seat the clip fully so wires are routed through the relief, not pinched.
• Inspect surrounding wiring and replace any frayed or damaged wires; do not use the clip to conceal damaged wiring.

The Handle is an OEM part for Bosch dishwashers. It provides the surface for securely grasping and maneuvering the dishwasher door during opening and closing. 

Causes of a bad handle can include wear and tear from ongoing grasping motions. Repeated lifting and adjusting of the door places stress on handle components over time.

Symptoms of a bad handle include:

• Looseness, wobbling or detachment from the door assembly
• Sharp edges, cracks or splits compromising a firm grip
• Reduced ability to precisely guide the door into position

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This micro filter is a fine-mesh replacement filter that traps food particles and debris in the dishwasher sump, helping maintain wash performance and protect the pump and drain from clogs. What it does:

• Captures small food particles to prevent recirculation and reduce spotting
• Helps keep the dishwasher drain and pump from clogging
• Supports consistent water flow for better cleaning results
• Can reduce odors caused by trapped debris in the filter area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack to access the sump area; follow your owner's manual for filter removal
• Ensure the filter is properly seated and locked before running a cycle
• Clean surrounding areas and inspect for additional debris while replacing the filter

The Pump Housing is an OEM part for Bosch dishwashers. It houses the circulating pump and motor assembly that circulates water throughout the dishwasher during all wash cycles. Located inside the dishwasher's sump, the pump housing plays a key role in water recirculation, pick-up, and distribution of water to spray arms for optimal cleaning performance.

Symptoms of a defective pump housing include: 

• Incomplete or weak water spray from arms
• Gaps in wash or rinse coverage 
• Soap residue or buildup clinging to dishes
• Sounds of grinding, rubbing, or vibration from the pump area

Causes of pump housing issues are often external damage or cracks incurred from impact or hard water mineral scale deposits built up over time. Replacing with this OEM housing restores peak water circulation for sparkling dishes.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This base panel is the lower kickplate that covers the appliance's front base opening and gives the unit a finished appearance while protecting internal components. It restores the clean look and helps block debris from the cavity. What it does:

• Replaces a damaged, dented, or missing lower kickplate to restore appearance
• Covers and protects internal components at the appliance base from dust and spills
• Helps keep pests and larger debris out of the cavity under the appliance
• Contributes to proper airflow routing at the appliance front (where applicable)

• Designed to mount with the factory fasteners; retain original screws or clips when possible
• Lift or tilt the appliance as needed for access—follow manufacturer safety guidance
• Disconnect power before attempting service that requires moving or tilting the unit
• If fasteners are missing or damaged, replace with manufacturer-specified hardware

Facia Panel (control panel trim) restores the appliance's finished appearance while protecting the control area. It covers buttons and the control housing, helping keep dirt and moisture away from the electronics and improving usability. What it does:

• Covers and protects control buttons, displays, and underlying electronics.
• Restores a damaged, cracked, or scratched front control surface for a clean look.
• Helps reduce debris, grease, and moisture exposure to controls.
• Replaced when the control trim is loose, broken, or cosmetically worn.

• Always disconnect power (unplug or shut off the circuit) before starting any work.
• Access may require removing the outer door trim or control housing; basic hand tools (screwdriver) are typically used.
• Handle the panel carefully to avoid sharp edges or cosmetic damage; align clips and fasteners before tightening.

This cover is a molded protective housing that replaces a cracked or missing outer piece to restore a secure fit and protect internal components from debris and damage. It helps keep wiring and small parts shielded during normal use. What it does:

• Protects internal components and wiring from dirt, moisture, and impact
• Restores proper fit and alignment where a damaged cover allowed movement or rubbing
• Reduces rattles or vibration caused by loose or broken housing pieces
• Keeps serviceable parts accessible while maintaining a finished appearance

• One cover

• Disconnect power to the appliance before starting any repair
• Remove any access panels or fasteners that obstruct the old cover
• Align the replacement cover with mounting tabs or screw holes and secure using original fasteners
• If clips or tabs are damaged, replace them before completing reassembly; inspect surrounding parts for damage

This adjusting device helps align and fine-tune moving parts so doors and components operate smoothly. It's a direct-fit replacement designed to restore proper adjustment and reliable positioning for compatible Bosch appliances. What it does:

• Provides precise adjustment of movable assemblies to correct alignment issues
• Helps reduce binding, rubbing, or uneven gaps at doors or panels
• Restores intended movement and positioning for better operation
• Works as the factory replacement part specified for alignment tasks

• One adjusting device

• Designed for direct replacement; use the appliance's service instructions or OEM guide for correct placement
• Turn off power to the appliance before servicing to avoid injury
• Keep fasteners and mounting orientation the same as the original part during installation

This support is a replacement mounting bracket that helps secure and stabilize internal appliance components for proper alignment and operation. Replacing a worn or broken support restores fit and reduces movement-related noise or malfunctions. What it does

• Holds internal components or assemblies in their correct position to prevent shifting during operation
• Restores proper alignment that can affect door fit, drawer travel, or rotating parts
• Reduces vibration and rattling caused by a loose or damaged support
• Suitable when the original support is cracked, bent, or missing

• One support as shown

• Disconnect power and, if applicable, water supply before beginning any repair
• Remove surrounding panels or assemblies as needed to access the support; keep fasteners for reassembly
• Inspect adjacent clips, screws, and mounting points; replace any damaged hardware

This lock clamp secures the dishwasher door latch assembly to help keep the door aligned and allow the latch to engage properly. Replaces a worn or broken clamp to restore reliable door closure and normal cycle starts. What it does:

• Holds the door latch/lock assembly in the correct position so the door can latch and the cycle can begin
• Commonly replaced when the door feels loose, the latch won't engage, or the door doesn't stay closed
• Helps prevent intermittent door-open errors caused by a misaligned or damaged clamp
• Works as part of the latch/lock system; does not include the entire latch or switch

• Basic hand tools typically required; disconnect power before starting and verify the appliance is powered off
• Remove inner door panel or access panel per manufacturer instructions to reach the latch area
• Handle sharp edges carefully; reassemble panels and test the door latch engagement before full use