Shu46c05uc Parts

For Whirlpool made dishwashers. Assembly includes one spring, one retainer and one protective tip. Replace both springs at the same time to prevent uneven load.

Size: 1 foot. This Bosch dishwasher drain hose comes with 2 o-rings. For the 5 foot drain hose order 00298564.

Color: White. This is the right side trim strip. For left side use 00353048.

Regulator with o-ring.

Bushing included. To order bushing separately use 00165296. This is the right side hinge. For left side hinge use 00263115.

This outer dishwasher door panel restores the appliance's front appearance and provides a finished, protective surface for the door. Fits replacement needs where the original panel is scratched, dented, or cosmetically worn. What it does:

• Replaces the outer door surface to restore the dishwasher's exterior finish and color
• Covers and protects internal door components from everyday wear
• Helps maintain a flush, sealed appearance around the door edge
• Addresses symptoms such as visible dents, deep scratches, paint wear, or detached/loose outer door skin

• Disconnect power to the dishwasher before beginning any service
• Exterior trim, handle, or insulation may need to be removed or transferred during installation
• Support the door when loosening fasteners to prevent dropping or damage
• Follow the manufacturer's service instructions for proper alignment and torque of door hardware

This door spring retainer secures the dryer/washer door spring to the cabinet so the hinge spring stays in place for reliable door movement and alignment. It prevents the spring from slipping or disengaging during normal use. What it does:

• Holds the door spring end in the correct position so the hinge maintains proper tension
• Helps prevent door sagging, misalignment, or a door that won't stay closed
• Keeps the spring secured to reduce rattling or intermittent disengagement
• Works with the existing door hinge/spring assembly to restore reliable opening and closing

• Disconnect power (and gas if applicable) before any service; wear gloves and eye protection
• Access typically requires opening or removing the dryer/washer front or top panel; follow OEM service manual for steps
• Retaining springs are under tension—carefully release and re-seat springs to avoid sudden movement
• If other hinge or spring hardware is damaged, replace those parts to ensure safe operation

This actuator lever assembly with springs replaces a worn or broken control lever to restore proper mechanical movement in the appliance. It helps the dispenser/latch mechanism operate smoothly for reliable everyday use. What it does:

• Transfers motion from a control cam or motor to the latch or dispenser linkage
• Restores proper engagement when a broken or fatigued lever prevents operation
• Helps stop intermittent or failed cycle starts caused by damaged mechanical linkage
• Works as a direct-fit replacement that re-establishes spring tension and lever action

• Disconnect power before accessing internal components to avoid shock or injury
• Basic hand tools usually required; maintain original screw/hardware if reusing
• Inspect surrounding linkages and replace damaged clips or fasteners as needed

A small spring-style hose clamp used to secure flexible appliance hoses to fittings and prevent leaks. Simple, durable replacement that restores a tight connection for water and drain lines. What it does:

• Compresses around a hose to hold it firmly on an inlet, outlet or drain fitting
• Helps stop leaks caused by loose or slipping hoses
• Keeps hoses seated during normal appliance operation and vibration
• Commonly used on dishwasher and washer drain or water hoses

• One hose clip / spring clamp

• Disconnect power and water supply before starting repairs
• Use pliers to expand the clamp for removal and reinstall; ensure hose is fully seated before releasing clamp
• Inspect the hose and fitting for damage; replace any cracked or brittle hose
• Do not overtighten or deform clamp when installing; replace if corroded or weakened

A replacement mounting screw to secure appliance panels and components so parts stay properly fastened during normal use. Small but essential hardware for stable, rattle-free operation and reliable repairs. What it does:

• Fastens panels, brackets or components to the appliance chassis
• Prevents loose panels, vibration noise, or parts shifting during operation
• Used when original screw is lost, damaged, or stripped
• Restores proper fit and alignment after disassembly for service

• Disconnect power and water before starting any repair
• Use the correct screw type and length; do not force or substitute oversized fasteners
• Tighten until snug—avoid overtightening to prevent stripped threads or cracked parts
• Keep small parts away from children and pets

This dishwasher drain hose kit includes a clamp with instructions.

This arm mounts below upper dishrack.

This is the left hinge cap. For right hinge cap use 00165295.

This door latch cover is a direct-fit replacement trim piece that protects and conceals the dishwasher door latch assembly while restoring a finished appearance. Keeps the latch area tidy and helps ensure the door closes cleanly. What it does:

• Covers and protects the door latch mechanism from debris and wear
• Helps the door latch engage and the door sit flush when closed
• Restores the appliance's cosmetic finish around the latch area
• Can address symptoms such as a loose-looking latch area or an unsealed door edge

• Disconnect power to the appliance before installing; follow lockout/tagout practices
• Basic hand tools (screwdriver or trim tool) are typically required to remove the old cover
• Align the new cover over the latch assembly and snap or fasten into place per OEM diagram
• If the latch mechanism or strike is damaged, replace those parts as needed for full repair

This white control button replaces a worn or broken push button on the appliance control panel, restoring a clean look and reliable user input. It's a direct-fit exterior button used to select cycles or options. What it does

• Replaces a damaged, faded, or missing control panel push button
• Provides a tactile surface for selecting cycles, options, or settings
• Restores proper engagement when the original button no longer actuates the switch
• Helps eliminate mis-presses caused by cracked or deformed buttons

• Disconnect power to the appliance before beginning any service
• Access may require removing the console or control panel bezel—keep screws and small parts organized
• Button typically snaps into the panel; align and press gently until it seats
• If the underlying switch is damaged, replace the switch assembly as well