Shv68e13uc Parts

This replacement foot is the leveling support at the base of your appliance. It helps set the height and keep the unit stable and level, reducing wobble, vibration, and noise for smoother, quieter operation.

• Supports the appliance base and provides solid floor contact
• Allows height/leveling adjustment as designed by the unit
• Helps correct rocking, vibration, walking, or door misalignment caused by an unlevel appliance
• Replace if the foot is cracked, missing, worn, or stripped and won't hold adjustment

• Disconnect power; shut off water supply if applicable
• Protect flooring and have a helper steady or move the unit
• Remove the damaged foot; install the new foot per the mounting style (threaded or push-in)
• Adjust height to level the cabinet and stability at all corners

The Fine Filter is an OEM part for Bosch dishwashers. It is designed to trap small food particles and debris before they can clog other areas of the dishwasher.

The fine filter is positioned inside the dishwasher tub and spray arms to act as a preliminary filter. It helps keep the wash and rinse zones free of obstructions to allow for the best cleaning performance.

Causes of a faulty fine filter are normal product usage over time, accumulation of stubborn food or mineral deposits, and occasional damage from sharp dish edges

Symptoms of a bad fine filter include:
Buildup of muck or grime that cannot be cleaned
Torn or damaged mesh that no longer traps particles
Improper drainage or water not circulating as it should
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Power Supply Unit is an OEM part for Bosch dishwashers. This part is responsible for supplying the necessary power to your dishwasher. It delivers reliable and consistent power to all the electrical parts of your dishwasher.  

A bad power supply unit can occur due to electrical faults, power surges, or normal wear and tear over time. Signs of a faulty power supply unit include the dishwasher not turning on, intermittent power loss, or electrical issues within the dishwasher.

Symptoms of a bad power supply unit include:

• The dishwasher not turning on 
• Intermittent power loss  
• Flickering lights  

Replace your faulty dishwasher power supply unit with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Dishwasher Hinge Lever is an OEM replacement part for Bosch dishwashers. This hinge lever is crucial for the operation of the dishwasher door, supporting smooth movement as it opens and closes. It works alongside the door springs to provide balanced tension, ensuring that the door stays securely in place when opened or closed. 

Over time, hinge levers may wear out due to regular use, strain from overloading the door, or corrosion from prolonged exposure to moisture. A damaged hinge lever can disrupt the door’s movement, leading to issues with opening, closing, or improper sealing of the dishwasher door.

Symptoms of a bad Dishwasher Hinge Lever include:

• Difficulty opening or closing the dishwasher door
• The door dropping open without resistance
• A loose or sagging door that won’t stay securely in place
• Unusual noises when moving the door 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Replacement door hinge that restores proper door alignment and smooth opening/closing for compatible Bosch appliances. Simple, direct support for the door pivot to reduce sagging, uneven closing, and noisy operation. What it does:

• Supports the appliance door pivot and maintains correct door alignment during use.
• Helps stop door sagging, uneven gaps, and doors that don't close or latch reliably.
• Restores smooth opening and closing and reduces hinge-related noise.
• Works as the mechanical pivot/connection between the door and cabinet frame.

• Turn off power and disconnect the appliance (and water supply if applicable) before starting any repair.
• Support the door while removing/installing the hinge to prevent damage or injury.
• Use the original mounting hardware or manufacturer-recommended fasteners; tighten securely but avoid overtightening.
• After installation, check door alignment and operation; adjust as needed per manufacturer instructions.

Spring-style hose clamp that secures flexible water hoses to fittings on select appliances, helping maintain a leak-tight connection at hose joints. Keeps hoses seated to reduce leaks and ensure reliable water flow. What it does:

• Holds flexible inlet, drain, or circulation hoses tightly on barbed fittings and nipples.
• Prevents leaks and water loss at hose connections by maintaining steady clamp pressure.
• Common signs it needs replacement: dripping or pooling near hose connections, a loose or wobbly hose, or visible clamp corrosion or deformation.
• Small, inexpensive part that restores a secure hose connection when the original clamp has failed.

• Always disconnect power and shut off the water supply before servicing appliance plumbing.
• For spring-style clamps, use pliers to open the clamp, position it over the hose, and release slowly so it seats properly; ensure the hose is fully pushed onto the fitting.
• Inspect the hose and fitting for damage; replace the hose if cracked or excessively worn before installing a new clamp.
• Wear eye protection when compressing or releasing spring clamps to avoid injury from sudden release.

This genuine replacement seal provides a watertight connection where components join, helping prevent leaks and maintain normal appliance performance. Use when an old or damaged seal allows water to escape or pooling occurs. What it does:

• Creates a tight seal between mating parts to stop water leaks
• Restores proper sealing at appliance joints or hose connections
• Helps prevent water damage and reduces the chance of intermittent leaks
• Commonly replaced when a seal is cracked, flattened, or missing

• Turn off power and water supply before replacing the seal.
• Clean and dry mating surfaces thoroughly before installing the new seal.
• Ensure correct orientation and proper seating so the seal sits evenly in the groove.
• Inspect adjoining parts for wear; replace damaged components to ensure a proper seal.

This sealing is a molded rubber gasket that provides a watertight barrier where two appliance components meet, helping prevent leaks and water damage. It's a direct-fit replacement when the original seal is cracked or worn. What it does:

• Creates a watertight seal to help prevent leaks during operation
• Restores proper sealing where the original gasket has become brittle, torn, or flattened
• Helps maintain appliance performance by keeping water inside the wash/tub area
• Reduces risk of water damage to cabinetry or floors from failing seals

• One sealing

• Disconnect power and water supply before beginning any repair
• Verify mating surfaces are clean and dry; remove any old sealant or debris for a proper fit
• Inspect the replacement for damage before installing and align evenly to avoid pinching

The Base Panel is an OEM replacement part for Bosch dishwashers. It serves as the protective front cover for the dishwasher's base, hiding the internal parts and providing a finished look to your appliance.

A bad base panel can occur due to accidental damage, wear and tear, or discoloration over time. Signs of a faulty base panel include cracks, dents, or a worn-out appearance.

Symptoms of a bad base panel include:

• Visible cracks, dents, or damage 
• A worn-out or faded appearance
• Difficulty in cleaning the panel

Restore your Bosch dishwasher by replacing the damaged or worn-out base panel with this genuine OEM part. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This spray arm is the rotating water distributor that delivers pressurized spray to clean dishes in compatible Bosch dishwashers. Replacing a damaged or clogged spray arm restores proper water coverage and cleaning performance. What it does:

• Spins and disperses wash water across the lower/middle rack to remove food and soils
• Helps maintain even water distribution for consistent cleaning results
• Can reduce spotting and missed-soil areas when functioning correctly
• Common symptom: noisy operation, poor spray coverage, or visible cracks/blocked jets

• One spray arm

• Turn off power and water supply before starting any repair
• Inspect mounting hub and seals; replace damaged clips or gaskets as needed
• Remove items from dishwasher racks for easier access; follow OEM instructions for removal and reinstallation
• If jets are clogged, clean before reinstalling to prevent reoccurrence

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or over-tightening during installation, leading to stripping or damage.  

Symptoms of a bad Thread Bolt include:

• Leaks around the water inlet area Loose or rattling water inlet valve 
• Difficulty in accessing or removing the valve assembly 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This inner door panel replaces a damaged or worn dishwasher door interior to restore proper door fit and help prevent leaks and rattling. It fits behind the outer door and supports the latch and internal components. What it does

• Forms the interior surface of the dishwasher door and helps keep water inside the tub
• Supports latch, insulation, and any door-mounted components
• Restores proper door alignment and reduces noise from a loose or dented door
• Commonly replaced when the door is dented, cracked, or showing signs of water intrusion

• One inner door panel

• Disconnect power (and water, if applicable) before starting; follow all safety precautions
• Removing the outer door panel and handling any attached wiring or insulation may be required
• Handle edges and any glass with care to avoid cuts or breakage

This replacement tube connects and directs fluid or air between system components to restore proper routing and prevent leaks or malfunctions. It's a direct-fit service part when the original tube is cracked, clogged, or damaged. What it does

• Channels water or airflow between internal components to maintain normal operation.
• Restores proper routing when the original tube is cracked, split, or collapsed.
• Helps stop visible leaks or pooling under the appliance associated with a failed tube.
• Reduces risk of related component damage caused by diverted fluids.

• One replacement tube.

• Disconnect power and turn off the water supply before starting any repair.
• Verify correct orientation and seating; secure with factory clamps or hose clamps as required.
• Inspect adjacent connections and replace any worn seals or clamps to ensure a leak-free installation.
• After installation, restore power/water and run a short cycle to check for leaks.

This insert is a replacement trim piece designed to restore the appliance's finished appearance and secure adjacent panels. It helps cover gaps and keeps exterior surfaces aligned for a clean, factory look. What it does:

• Replaces a cracked, chipped, or missing trim insert that exposes panel edges
• Helps maintain proper panel alignment and prevents rubbing or catching
• Restores the original finished appearance of the dispenser/door area
• Useful when trim fastening points are intact but the visible insert is damaged

• High-level replacement: typically snaps or slides into place—no specialized tools required
• Disconnect power or follow maker safety guidance when accessing interior panels near electrical components
• Inspect surrounding clips and fasteners; replace if worn to ensure proper fit