Shx3ar72uc Parts

This is a replacement control panel push button that restores a responsive, easy-to-press control on your appliance. It replaces a cracked, stuck, or missing button so you can select cycles and settings reliably. What it does:

• Acts as the user-facing push input for the appliance control panel
• Restores tactile feedback for selecting cycles, options, or start functions
• Commonly used when a button is cracked, stuck, or no longer registers presses
• Works with the existing switch assembly and bezel when installed correctly

• Disconnect power to the appliance before starting any repair.
• Access typically requires removing the control panel or trim; keep screws and small parts organized.
• Remove the old button by gently unfastening from the panel; press the new button into place until it snaps securely.

This lock clamp secures the appliance door latch assembly so the door closes and seals reliably. It replaces a worn or broken clamp to restore proper latch engagement and help prevent door misalignment or failure to stay closed. What it does

• Holds the door latch or interlock assembly in position so the door can securely close
• Helps restore normal door engagement when a loose or damaged clamp causes the door to sag or not latch
• Commonly replaced when the door makes noise, feels loose, or the latch does not align
• Works with the latch housing and nearby mounting hardware to keep the lock mechanism stable

• One lock clamp (single clamp only)

• High-level replacement: usually accessed from the door or control area; remove power before servicing
• Inspect adjacent latch, springs, and mounting screws and replace any damaged parts
• Tighten fasteners to secure the clamp without overtightening or deforming plastic parts

This stress relief is a small strain-relief clip that protects wiring where the harness passes through the cabinet, reducing pull and chafing on connections. Replacing a worn clip helps prevent loose wires and intermittent electrical issues. What it does:

• Secures the appliance wiring at an entry point to reduce strain on terminals and connectors.
• Prevents chafing and abrasion of wire insulation where harnesses pass through the cabinet or mounting openings.
• Can reduce symptoms such as intermittent power, flickering controls, or visible loose/frayed wires at the harness.
• Simple mechanical part: no electrical function but critical for long-term wiring reliability.

• Disconnect power (unplug appliance or switch off breaker) before accessing wiring; turn off gas supply where applicable.
• Remove panels as needed to access the harness entry; seat the clip fully so wires are routed through the relief, not pinched.
• Inspect surrounding wiring and replace any frayed or damaged wires; do not use the clip to conceal damaged wiring.

The Handle is an OEM part for Bosch dishwashers. It provides the surface for securely grasping and maneuvering the dishwasher door during opening and closing. 

Causes of a bad handle can include wear and tear from ongoing grasping motions. Repeated lifting and adjusting of the door places stress on handle components over time.

Symptoms of a bad handle include:

• Looseness, wobbling or detachment from the door assembly
• Sharp edges, cracks or splits compromising a firm grip
• Reduced ability to precisely guide the door into position

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Pump Housing is an OEM part for Bosch dishwashers. It houses the circulating pump and motor assembly that circulates water throughout the dishwasher during all wash cycles. Located inside the dishwasher's sump, the pump housing plays a key role in water recirculation, pick-up, and distribution of water to spray arms for optimal cleaning performance.

Symptoms of a defective pump housing include: 

• Incomplete or weak water spray from arms
• Gaps in wash or rinse coverage 
• Soap residue or buildup clinging to dishes
• Sounds of grinding, rubbing, or vibration from the pump area

Causes of pump housing issues are often external damage or cracks incurred from impact or hard water mineral scale deposits built up over time. Replacing with this OEM housing restores peak water circulation for sparkling dishes.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This door handle replaces a worn, damaged or broken dishwasher door handle so the door opens and closes securely and looks like new. It restores a solid grip and normal operation of the dishwasher door. What it does:

• Provides a secure grip to open and close the dishwasher door safely
• Replaces cracked, bent or loose handles that prevent proper latching or smooth operation
• Restores the appliance's exterior appearance when the original handle is scratched or damaged
• Matches the cabinet mounting points to align the door and handle correctly

• One door handle

• Remove power and disconnect the dishwasher before starting any work
• Installation generally requires removing the inner door panel to access screws or clips; handle fasteners may be inside the door
• Keep screws and small parts organized during disassembly to ensure proper reassembly

This facia panel is the exterior trim that covers and protects the dishwasher control area, restoring a finished appearance and shielding the control buttons and electronics from spills and wear. Use it to replace cracked, warped, or cosmetically damaged front trim. What it does

• Covers the control area and provides a finished front appearance
• Protects control buttons and underlying electronics from splashes and debris
• Replaces cracked, bent, or cosmetically damaged control trim
• Helps prevent snagging or catching on the control edge while opening/closing

• Disconnect power to the appliance before starting any repair
• This panel typically fastens behind the outer door or to the control assembly; retain all mounting screws and clips during removal
• Handle edges carefully to avoid scratching the finish

This insulating part cushions and thermally isolates internal components to help reduce heat transfer and vibration noise in the appliance. It's a small replacement piece that restores proper spacing and protection around sensitive parts. What it does:

• Provides thermal separation between hot components and surrounding cabinet parts to help prevent heat damage
• Cushions components to reduce vibration and rattling noises during operation
• Helps maintain correct part clearances for safe, reliable performance
• Used where original insulation was damaged, missing, or deteriorated

• Disconnect power and, if applicable, water before beginning any repair
• Handle carefully; avoid compressing or tearing the insulation during installation
• Verify correct orientation and secure fit against the intended component or cabinet surface

This cover is a molded protective housing that replaces a cracked or missing outer piece to restore a secure fit and protect internal components from debris and damage. It helps keep wiring and small parts shielded during normal use. What it does:

• Protects internal components and wiring from dirt, moisture, and impact
• Restores proper fit and alignment where a damaged cover allowed movement or rubbing
• Reduces rattles or vibration caused by loose or broken housing pieces
• Keeps serviceable parts accessible while maintaining a finished appearance

• One cover

• Disconnect power to the appliance before starting any repair
• Remove any access panels or fasteners that obstruct the old cover
• Align the replacement cover with mounting tabs or screw holes and secure using original fasteners
• If clips or tabs are damaged, replace them before completing reassembly; inspect surrounding parts for damage

This outer door is the exterior front panel for the appliance door, restoring appearance and protecting internal door components from damage. Replaces a dented, cracked or cosmetically worn outer door to improve fit and finish. What it does

• Replaces the exterior front panel to cover and protect inner door parts and insulation
• Restores the door's appearance when the outer panel is dented, scratched or cracked
• Helps maintain proper door alignment and seal by providing a correct mounting surface
• Prevents foreign objects from contacting inner door components

• Disconnect power to the appliance before starting any repair
• Remove the inner door assembly and any trim or handles per the service manual to access outer panel fasteners
• Handle the panel carefully to avoid scratches and to protect the painted/finished surface

This push-style control panel button restores tactile input for your appliance's front control assembly, letting you select cycles and settings again without replacing the entire panel. Commonly used where individual buttons snap into the console. What it does:

• Replaces a worn, broken, or missing push button on the control or console panel
• Restores responsive, tactile feedback for cycle and option selection
• Helps stop accidental presses caused by cracked or loose buttons
• Works with the existing switch beneath the panel when fitted correctly

• Power off and unplug the appliance before accessing the control panel
• Remove the console or trim per your model's service instructions to access the button retainer
• Snap the new button into the bezel until it seats; verify proper movement and switch actuation
• If the underlying switch or retainer is damaged, inspect and replace those parts as needed