Shx5av56u Parts

The Pump Housing is an OEM part for Bosch dishwashers. It houses the circulating pump and motor assembly that circulates water throughout the dishwasher during all wash cycles. Located inside the dishwasher's sump, the pump housing plays a key role in water recirculation, pick-up, and distribution of water to spray arms for optimal cleaning performance.

Symptoms of a defective pump housing include: 

• Incomplete or weak water spray from arms
• Gaps in wash or rinse coverage 
• Soap residue or buildup clinging to dishes
• Sounds of grinding, rubbing, or vibration from the pump area

Causes of pump housing issues are often external damage or cracks incurred from impact or hard water mineral scale deposits built up over time. Replacing with this OEM housing restores peak water circulation for sparkling dishes.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This electronic control unit regulates the appliance's functions and user interface, restoring reliable control and cycle management. It replaces a failed or unresponsive main control to get the appliance back to normal operation. What it does:

• Manages cycle selection, timing and command signals for the appliance's systems
• Processes user inputs and updates the display or indicator lights
• Replaces boards that cause unresponsive controls, error codes, or intermittent operation
• Helps stop erratic behavior caused by failed relay switching or control logic

• One control unit

• Disconnect power to the appliance before starting any work to avoid shock
• Handle the board by its edges and avoid static discharge; wear an ESD strap if available
• Verify connector orientation and secure all wiring; do not force connectors
• Power on and run a test cycle after installation to confirm normal operation

This cover is a molded protective housing that replaces a cracked or missing outer piece to restore a secure fit and protect internal components from debris and damage. It helps keep wiring and small parts shielded during normal use. What it does:

• Protects internal components and wiring from dirt, moisture, and impact
• Restores proper fit and alignment where a damaged cover allowed movement or rubbing
• Reduces rattles or vibration caused by loose or broken housing pieces
• Keeps serviceable parts accessible while maintaining a finished appearance

• One cover

• Disconnect power to the appliance before starting any repair
• Remove any access panels or fasteners that obstruct the old cover
• Align the replacement cover with mounting tabs or screw holes and secure using original fasteners
• If clips or tabs are damaged, replace them before completing reassembly; inspect surrounding parts for damage

This adjusting device helps align and fine-tune moving parts so doors and components operate smoothly. It's a direct-fit replacement designed to restore proper adjustment and reliable positioning for compatible Bosch appliances. What it does:

• Provides precise adjustment of movable assemblies to correct alignment issues
• Helps reduce binding, rubbing, or uneven gaps at doors or panels
• Restores intended movement and positioning for better operation
• Works as the factory replacement part specified for alignment tasks

• One adjusting device

• Designed for direct replacement; use the appliance's service instructions or OEM guide for correct placement
• Turn off power to the appliance before servicing to avoid injury
• Keep fasteners and mounting orientation the same as the original part during installation

This support is a replacement mounting bracket that helps secure and stabilize internal appliance components for proper alignment and operation. Replacing a worn or broken support restores fit and reduces movement-related noise or malfunctions. What it does

• Holds internal components or assemblies in their correct position to prevent shifting during operation
• Restores proper alignment that can affect door fit, drawer travel, or rotating parts
• Reduces vibration and rattling caused by a loose or damaged support
• Suitable when the original support is cracked, bent, or missing

• One support as shown

• Disconnect power and, if applicable, water supply before beginning any repair
• Remove surrounding panels or assemblies as needed to access the support; keep fasteners for reassembly
• Inspect adjacent clips, screws, and mounting points; replace any damaged hardware

This support is a replacement mounting bracket that secures internal components and helps maintain proper alignment. It restores stability and reliable operation after damage or wear to the original support. What it does:

• Provides structural support for internal assemblies to prevent sagging or misalignment
• Helps keep parts positioned correctly to reduce rubbing, noise, or binding
• Restores proper fit after a cracked or bent support causes operational issues
• Compatible with the appliance's factory mounting points for a direct-fit replacement

• Install with the appliance powered off and disconnected from the mains
• Use correct fasteners and torque to avoid stress or deformation of the support
• Inspect nearby components for damage and replace as needed while access is available

This lock clamp secures the dishwasher door latch assembly to help keep the door aligned and allow the latch to engage properly. Replaces a worn or broken clamp to restore reliable door closure and normal cycle starts. What it does:

• Holds the door latch/lock assembly in the correct position so the door can latch and the cycle can begin
• Commonly replaced when the door feels loose, the latch won't engage, or the door doesn't stay closed
• Helps prevent intermittent door-open errors caused by a misaligned or damaged clamp
• Works as part of the latch/lock system; does not include the entire latch or switch

• Basic hand tools typically required; disconnect power before starting and verify the appliance is powered off
• Remove inner door panel or access panel per manufacturer instructions to reach the latch area
• Handle sharp edges carefully; reassemble panels and test the door latch engagement before full use

This insulating part is a molded insulator that protects nearby components by reducing heat transfer and providing electrical isolation, helping prevent heat damage and short circuits for safer, more reliable appliance operation. What it does:

• Provides thermal insulation to limit heat transfer from hot components to surrounding parts
• Offers electrical isolation to help prevent shorts between conductors or grounded metal
• Maintains proper spacing and support for wiring or small assemblies
• Helps prevent symptoms such as scorch marks, melted wiring insulation, burning smells, or intermittent electrical behavior

• Disconnect power to the appliance before attempting any repair
• Inspect the surrounding area and the old insulator's location and orientation before removal
• Replace with the same part and orientation; avoid compressing or deforming the insulator

This outer door panel replaces a damaged or worn exterior door surface to restore appearance and protect internal door parts. It provides the finished outer surface that customers see and touch on the appliance. What it does:

• Replaces a dented, scratched, or rusted outer door surface
• Restores the appliance's finished exterior and curb appeal
• Protects internal door components and insulation from damage
• Helps maintain a proper seal by providing correct door alignment

• One outer door panel

• Remove power (unplug or switch off breaker) before beginning work
• Some installations require removing the inner door panel, glass, or trim; handle and hardware may be separate
• Use appropriate hand tools; avoid bending or scratching the new panel during install

This replacement hood canopy restores the exterior cover of the range hood to protect internal components and maintain proper ventilation performance and appearance. It's a direct-fit exterior panel that replaces damaged or dented hoods. What it does:

• Covers and protects internal fan, light, and wiring from grease and debris
• Channels exhaust airflow through the hood body to the vent system
• Restores proper fit and finish when the original hood is bent, dented, or corroded
• Helps reduce visible gaps and rattling caused by a damaged outer panel

• Disconnect power to the appliance before starting any work to avoid electrical shock
• Wear gloves and eye protection to guard against sharp edges and debris
• Removal/installation may require basic hand tools and a second person to support the panel
• Follow the appliance manufacturer's service instructions for proper alignment and fastening