Shx7er55uc Parts

This is the appliance's main power on/off switch. It restores reliable control of electrical power to the unit so you can turn it on and off consistently.

• Controls AC power to the appliance's user interface and electronics
• Worn or stuck switch can cause no power, intermittent power, or inability to shut off
• Spongy or loose button feel may indicate internal switch failure

• Disconnect power before service to avoid electrical shock
• Access typically requires removing the control panel or console
• Note wire positions or take a photo before disconnecting
• Do not force tabs; transfer any clips or boots from the old switch if present

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This regeneration valve directs brine through your dishwasher's built-in water softener during recharge cycles, helping prevent hard-water film and spotting. Replacing a faulty valve restores consistent softening and better cleaning results.

• Opens to route salt brine through the ion-exchange resin during regeneration
• Helps maintain proper water hardness feeding the wash system
• Failure can lead to white film/spots, cloudy glassware, mineral buildup, and reduced cleaning
• Also contributes to inconsistent softener performance over time

• Disconnect power and turn off the water supply before servicing
• Access location varies by model; note hose routing and valve orientation during removal
• Inspect hoses and seals; replace if worn to prevent leaks
• Restore water/power and run a short cycle to check for leaks and proper operation

This small insert is a precision-fit piece that helps secure and align a mating component so it fits and functions properly. Replacing a worn or missing insert restores a solid connection and dependable operation. What it does:

• Provides a snug mounting/locating point for the related part
• Helps prevent looseness, rattling, or misalignment
• Restores proper fit after cracking, wear, or loss
• Common signs include a cracked or missing insert and parts that no longer stay in place

• 1 insert

• Disconnect power (and water supply, if applicable) before servicing
• Compare the new insert to your original to match and orientation
• Remove any broken fragments and clean the area before installation
• Press or snap into place carefully; do not force or overtighten any fasteners

This water distributor directs rinse and wash water to the dishwasher spray arms for even cleaning and circulation. Replacing a faulty distributor restores proper water routing and helps recover normal wash performance. What it does

• Channels wash and rinse water to the spray arms and wash assembly
• Ensures correct water flow timing during wash cycles
• Commonly replaced when spray arms fail to spin or performance drops
• Can cause poor cleaning or uneven spraying if cracked, clogged, or leaking

• Disconnect power and shut off the water supply before starting
• Access typically requires removing the dishwasher base panel or lower access panel
• Handle clips and seals carefully; replace any damaged gaskets to avoid leaks
• Test for leaks and proper spray-arm operation after reassembly

This inlet seal is a small rubber gasket that creates a watertight connection at the dishwasher's water inlet. Replacing a worn seal helps stop leaks and ensures the inlet valve can fill the appliance properly. What it does:

• Seals the water inlet connection to prevent drips or steady leaks underneath the dishwasher
• Maintains a tight seal at the inlet valve so the fill cycle can operate normally
• Commonly replaced when there is visible wear, cracking, or persistent water on the floor
• Helps avoid water damage and the nuisance of repeated drainage or fill errors tied to leaking

• One inlet seal

• Turn off the water supply and disconnect power before servicing
• Remove the inlet valve or access panel as needed to reach the seal; replace with the old seal removed
• Make sure the new seal is seated evenly and the mating surfaces are clean before reassembly

This push button set replaces the worn or damaged control buttons on compatible Bosch appliance control panels, restoring tactile feedback and reliable user input for cycle selection and control functions. What it does:

• Replaces broken, cracked, or missing push buttons that prevent normal panel operation
• Restores proper tactile feel for selecting cycles, options, and other controls
• Helps eliminate buttons that stick, don't depress fully, or fail to register presses
• Improves appearance of the control panel when original buttons are faded or discolored

• Disconnect power to the appliance before beginning any repair to avoid shock or damage
• Typically installs from the front of the control panel; may require removing the outer panel or trim
• Handle buttons gently—do not force; align clips or posts before pressing into place

This replacement rail restores smooth, supported movement of a dishwasher rack so loading and unloading work as intended. It replaces a worn, cracked, or bent rail to stop sagging and improve rack alignment. What it does:

• Guides the dishwasher rack along its track for consistent in-and-out motion
• Supports rack weight to prevent tipping or sagging when extended
• Replaces damaged, cracked, or worn rails that cause noisy or jerky operation
• Helps restore proper rack alignment and engagement with the rollers

• Disconnect power and turn off water supply before beginning any repair.
• Remove the affected rack to access and replace the rail; keep small clips or fasteners for reassembly.
• Inspect rack rollers and mounting clips; replace any damaged components for best performance.

This water inlet valve assembly controls water flow into the appliance, restoring normal fill operations and preventing overfilling when the original valve fails. Use this replacement if the unit won't fill or fills irregularly. What it does:

• Opens and closes to admit water into the appliance during fill cycles
• Works with the control system to stop water flow when filling is complete
• Commonly replaces valves that hum, leak at the inlet, or fail to allow water in
• Helps resolve symptoms like no fill, slow fill, or intermittent filling

• Disconnect power and shut off the water supply before beginning repair
• Verify inlet hoses and electrical connections are secure and properly seated
• Inspect sealing surfaces and replace any damaged gaskets or hoses to prevent leaks
• Test operation and check for leaks after reinstalling and restoring power/water

This bottom case is the dishwasher base assembly that protects internal components and helps contain leaks, keeping the wash system stable and secure. It's a direct-fit replacement that restores the appliance's lower enclosure. What it does

• Forms the appliance's lower enclosure to shield the pump, motor and wiring from debris
• Helps direct and contain water in the event of minor leaks to protect surrounding components
• Provides mounting surfaces for lower hardware and supports correct alignment of internal parts
• Can reduce rattles or vibration caused by a damaged or cracked lower shell

• One bottom case

• Disconnect power and water supply before beginning any repair
• Handle the part carefully to avoid damaging edges, clips or mounting tabs
• Keep fasteners and any hardware from the original unit; verify fit and alignment before tightening
• If you see water or corrosion, dry and inspect surrounding components for damage before reassembly

This sealing gasket replaces a worn or damaged seal to help prevent leaks and maintain proper sealing in the appliance. It restores a secure fit where the original seal has hardened, cracked, or lost flexibility. What it does:

• Provides a watertight seal at the mating surfaces to reduce leaks and drips
• Helps maintain proper pressure and containment of fluids during operation
• Prevents debris and odors from passing through compromised gaps
• Commonly replaced when visible cracks, flattening, or leaks occur

• Disconnect power and turn off water supply before starting any repair
• Remove the old seal carefully to avoid damaging surrounding parts
• Ensure mating surfaces are clean and dry before fitting the new seal
• Verify proper orientation and seating; do not use sealants unless explicitly specified by OEM