Shx7pt55uc Parts

This holder secures internal components to keep assemblies aligned and stable, reducing vibration and wear. It's a simple replacement that restores proper fit where a broken or missing clip causes loose panels or noisy operation. What it does

• Secures and aligns panels or wiring harnesses inside the appliance
• Prevents rattling, vibration, and misalignment caused by damaged or missing clips
• Helps maintain proper component spacing to avoid wear or interference
• Restores secure attachment after breakage or plastic fatigue

• Disconnect power and water before starting any repair
• Remove access panels or trim to reach the damaged clip—keep fasteners organized
• Press or snap the holder into place; replace any broken tabs before reassembling
• If plastic anchors are damaged, replace them with matching OEM clips

This replacement worm gear is a small plastic drive gear that transmits rotational motion between the motor and driven components, restoring normal gear-driven movement and reducing slipping or grinding. What it does:

• Transfers torque from the motor to the mating gear or gearbox for proper mechanical operation
• Replaces worn, stripped, or damaged worm teeth that cause slipping or loss of drive
• Stops grinding, clicking, or intermittent movement when the gear is the fault
• Helps restore smooth, consistent operation of the driven mechanism when installed correctly

• One worm gear

• Disconnect power to the appliance before beginning any repair
• Inspect mating gears and shafts for wear; replace worn parts to prevent repeat failure
• Use OEM-approved lubricant only where specified; do not force or overtighten mating components

This sealing is a molded rubber gasket that provides a watertight barrier where two appliance components meet, helping prevent leaks and water damage. It's a direct-fit replacement when the original seal is cracked or worn. What it does:

• Creates a watertight seal to help prevent leaks during operation
• Restores proper sealing where the original gasket has become brittle, torn, or flattened
• Helps maintain appliance performance by keeping water inside the wash/tub area
• Reduces risk of water damage to cabinetry or floors from failing seals

• One sealing

• Disconnect power and water supply before beginning any repair
• Verify mating surfaces are clean and dry; remove any old sealant or debris for a proper fit
• Inspect the replacement for damage before installing and align evenly to avoid pinching

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or over-tightening during installation, leading to stripping or damage.  

Symptoms of a bad Thread Bolt include:

• Leaks around the water inlet area Loose or rattling water inlet valve 
• Difficulty in accessing or removing the valve assembly 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This water softener assembly conditions incoming dishwasher water to reduce mineral buildup and improve wash performance. It helps prevent hard-water spots and cloudy glassware for clearer, cleaner results. What it does:

• Removes or binds hardness minerals from incoming water to reduce limescale and spotting
• Helps maintain detergent effectiveness for better cleaning and rinsing
• Reduces mineral buildup inside the wash system and on dishes and glassware
• Supports consistent wash performance in areas with hard water

• One water softener assembly

• Disconnect power and shut off the water supply before servicing
• Inspect and replace any seals or gaskets if damaged; use manufacturer-recommended parts
• Handle the unit carefully to avoid damage to connectors or mounting features
• Refer to the dishwasher service manual or OEM installation instructions for exact placement and wiring

This temperature sensor (thermistor) measures appliance temperature and sends a signal to the control board so the unit can maintain proper cooling cycles. Replaces a failed or intermittent sensor for more reliable temperature control. What it does:

• Detects internal temperature and provides a changing resistance signal to the control board
• Helps the control board regulate compressor and fan operation for consistent cooling
• Commonly linked to symptoms like incorrect temperatures, frequent cycling, or related error codes
• Works as a direct-replacement sensing element

• One temperature sensor (thermistor) as pictured

• Disconnect power before servicing to avoid shock or damage
• Handle the sensor and wiring gently; avoid kinking or pinching the harness
• Access may require removing interior panels or covers; keep mounting hardware for reinstallation
• Test with a multimeter or follow OEM service instructions before replacement

This retaining nut secures threaded connections on compatible Bosch appliances to keep components tight and stable during operation. A small replacement that restores proper fastening and prevents parts from loosening. What it does:

• Fastens and secures mating threaded components to maintain mechanical stability
• Prevents vibration-induced loosening of attached parts
• Helps maintain proper alignment of secured components during use
• Can stop intermittent movement or rattling caused by a missing or damaged nut

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Verify correct nut location and thread engagement before tightening; do not force threads
• Tighten to snug fit—avoid overtightening which can strip threads or damage components

A replacement facia panel that restores the front control trim and appearance of the appliance, providing a clean, finished look and protecting control components from everyday wear. What it does:

• Replaces damaged, cracked, or worn front control trim to improve appearance
• Protects underlying buttons, switches, and electronics from splashes and debris
• Restores proper fit and alignment of the control area for smooth operation
• Helps prevent accidental contact with controls caused by exposed components

• One facia panel

• Disconnect power to the appliance before beginning any work
• Removal typically requires accessing fasteners behind the door or control assembly; retain all screws and brackets
• Handle panel edges and clips carefully to avoid cosmetic or mounting damage

This replacement hose clamp secures a hose to its fitting to maintain a tight, leak-resistant seal. Replacing a worn clamp helps stop drips and keeps fill, drain, or circulation lines firmly in place for reliable operation.

• Applies clamping force to hold a hose on a barb or stub connection
• Helps prevent leaks at hose joints
• Common symptoms: water leaking at a hose connection, hose slipping off, poor fill or drain performance
• Replace when the original is loose, corroded, distorted, or lost tension; also recommended when installing a new hose

• Disconnect power and shut off water supply before servicing
• Expect some residual water; protect the work area
• Note the clamp's position/orientation; use appropriate hand tools for the clamp style
• Ensure the hose is fully seated and clamp is secure; run a test cycle and check for leaks

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This regeneration valve directs brine through your dishwasher's built-in water softener during recharge cycles, helping prevent hard-water film and spotting. Replacing a faulty valve restores consistent softening and better cleaning results.

• Opens to route salt brine through the ion-exchange resin during regeneration
• Helps maintain proper water hardness feeding the wash system
• Failure can lead to white film/spots, cloudy glassware, mineral buildup, and reduced cleaning
• Also contributes to inconsistent softener performance over time

• Disconnect power and turn off the water supply before servicing
• Access location varies by model; note hose routing and valve orientation during removal
• Inspect hoses and seals; replace if worn to prevent leaks
• Restore water/power and run a short cycle to check for leaks and proper operation

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks