Shx7pt55uc Parts

The Toe Panel Support Bracket is an OEM part for Bosch dishwashers. This part provides support and stability to the toe panel, which is the panel at the bottom of the dishwasher's front.

Causes of a bad part can include physical impact, improper installation, or general wear and tear over time, leading to weakening or damage of the support bracket.

Symptoms of a bad Toe Panel Support Bracket can include:

• Looseness or instability of the toe panel
• The toe panel becoming detached or falling off
• Difficulty in properly aligning or installing the toe panel
• Visible damage or cracks in the support bracket itself

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or over-tightening during installation, leading to stripping or damage.  

Symptoms of a bad Thread Bolt include:

• Leaks around the water inlet area Loose or rattling water inlet valve 
• Difficulty in accessing or removing the valve assembly 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

A direct-replacement display module for the appliance control panel that restores readable status indicators and touch/button feedback so you can use cycle selections and view error information clearly. What it does:

• Shows cycle status, time remaining and error codes on the control panel display
• Relays user input from touchpads/buttons to the main control board
• Fixes symptoms like a blank or flickering display, unresponsive controls, or missing status lights
• Works as the user interface portion of the control assembly for normal operation

• One display module

• Disconnect power to the appliance before beginning any repair
• Handle ribbon cables and connectors gently; ensure secure, fully seated connections
• Remove the outer control panel to access the module—retain screws and trim pieces
• Test the main control board and wiring harness for faults

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This replacement door handle restores a secure grip and proper operation to your appliance door. It provides a direct, OEM-matching fit and helps the door open and close smoothly when the original handle is cracked, loose, or broken. What it does:

• Replaces a damaged, cracked, or broken door handle to restore safe opening and closing
• Provides a firm grip and correct clearance for door operation
• Prevents further damage from using a compromised handle
• Matches original mounting points for straightforward replacement when correct part is used

• Turn off power to the appliance (or unplug) before starting any repair
• Inspect mounting screws and trim; reuse only undamaged hardware or replace as needed
• Typical installation requires removing door trim or inner panel—follow your model's service instructions

This insert is a replacement rack insert designed to restore proper item support and organization inside the appliance. It helps keep dishes and utensils secure so they wash and dry more effectively. What it does

• Replaces a damaged or missing rack insert that no longer holds items securely
• Restores proper spacing and support to prevent shifting or tipping during cycles
• Helps reduce chipping and breakage caused by loose items
• Can improve wash coverage by keeping items in the intended position

• One rack insert as shown

• Remove power and water supply to the appliance before servicing
• Slide out the affected rack and snap or slide the insert into the matching slots; no special tools typically required
• Inspect adjacent clips and rails for wear and replace if damaged

This sealing gasket replaces a worn or damaged seal to help prevent leaks and maintain proper sealing in the appliance. It restores a secure fit where the original seal has hardened, cracked, or lost flexibility. What it does:

• Provides a watertight seal at the mating surfaces to reduce leaks and drips
• Helps maintain proper pressure and containment of fluids during operation
• Prevents debris and odors from passing through compromised gaps
• Commonly replaced when visible cracks, flattening, or leaks occur

• Disconnect power and turn off water supply before starting any repair
• Remove the old seal carefully to avoid damaging surrounding parts
• Ensure mating surfaces are clean and dry before fitting the new seal
• Verify proper orientation and seating; do not use sealants unless explicitly specified by OEM

This replacement cable restores an internal electrical connection between components in compatible Bosch appliances, helping fixed or intermittent power/signal issues at the affected circuit. Use it when a damaged or broken cable prevents normal operation. What it does

• Re-establishes a secure electrical link between internal modules or assemblies.
• Commonly replaced for intermittent operation, loss of function, or visible cable damage.
• Helps eliminate shorts or open circuits caused by frayed insulation, broken conductors, or loose terminations.
• Matches OEM routing and termination when used in the correct location.

• High-level task: replace the failing cable with the unit shut off and unplugged or power disconnected at the breaker.
• Observe proper routing and secure any strain reliefs or clips to prevent pinching and abrasion.
• Verify connectors are fully seated and latched; avoid forcing misaligned terminals.

This mounting bracket secures a small internal component in place to restore proper alignment and reduce movement or noise. It's a simple replacement that helps keep your appliance operating quietly and reliably. What it does

• Supports and holds an internal part or assembly in the correct position
• Stops rubbing, vibration, or rattling caused by a broken or loose bracket
• Restores normal alignment so adjacent parts can operate without interference
• Used where a small molded or stamped support is required inside the appliance

• One holder (mounting bracket) as shown

• Disconnect power and water before starting any repair
• Remove access panel(s) to reach the damaged holder; basic hand tools typically required
• Keep original fasteners; replace only if explicitly listed as included

This insulating part is a small thermal/electrical insulator used on select appliances to help prevent heat transfer and protect nearby components. It reduces heat-related wear and helps maintain safe operation around sensitive parts. What it does:

• Provides thermal insulation between hot components and adjacent parts to reduce heat transfer.
• Helps protect wiring, plastic components, and electronics from overheating.
• Can prevent heat-related noise, discoloration, or softening of nearby materials.
• Useful when replacing damaged, brittle, or missing insulation that exposes components.

• One insulating part as shown

• High-level replacement only; ensure appliance is unplugged or power is disconnected before service.
• Handle carefully to avoid contamination or damage; install in the same orientation and location as the original.
• If insulation is attached near high-temperature components, verify surrounding parts are intact and not degraded.