Shx8er55uc Parts

This replacement handle restores a secure, comfortable grip for opening and closing your appliance. Use it to replace a worn, loose, cracked, or missing handle and bring back the original look and everyday usability. What it does:

• Provides the handhold needed to open and close the door, drawer, or panel
• Attaches to the appliance panel using model-specific fasteners
• Helps maintain proper alignment and a clean, finished appearance
• Common symptoms: loose or wobbly handle, cracks/breaks, missing handle, difficulty opening

• 1 handle

• Disconnect power at the breaker and, if applicable, shut off water before servicing
• Access and remove the mounting fasteners from the opposite side of the panel/door; support the handle while removing
• Transfer and reuse the original screws, spacers, and end caps as required by your model
• Tighten fasteners evenly and avoid overtightening; verify smooth operation after reassembly

The Cutlery Drawer is an OEM component specifically designed for select Bosch dishwashers featuring third rack add-on compartments. This dedicated caddy optimizes silverware cleaning through specialized spray targeting.

Multi-level silverware baskets keep like items grouped to expose all surfaces and edges to optimal washing coverage. Durable slides facilitate smooth extension and retraction for easy loading and unloading. 

Symptoms signaling the need for a replacement cutlery drawer include:

• Missing or broken basket dividers allowing commingling
• Gummy or sticky drawer glides from food remains to obstruct movement  
• Cracks or holes exposing silverware to direct heating elements

Causes may stem from sharp objects puncturing divider walls or sustained high temperatures weakening plastics over decades. Regular cleaning helps prolong a useful lifetime.

This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and select Kenmore dishwashers configured with triple racks for luxurious silverware hygiene.
 

This inner door panel forms the inside surface of the dishwasher door. It supports key door components and helps seal the tub, keeping water and heat contained for reliable, quiet operation.

• Provides the structural interior panel of the door
• Mounts the detergent dispenser, latch, and vent components
• Works with the door gasket to contain water and steam
• Typical symptoms include dents/rust, leaks at the door area, or a loose/misaligned dispenser or latch

• Disconnect electrical power and turn off the water supply before starting
• Open the door, support the outer panel, and remove perimeter screws to separate the door halves
• Transfer the dispenser, latch/lock, vent, wiring, and insulation from the old panel to the new one; reuse hardware and seals if in good condition
• Ensure the door gasket seats evenly; after reassembly, run a short test cycle and check for leaks

The Wire Harness is an OEM component specifically designed for select Bosch dishwashers requiring electrical connections between moving components. It facilitates signal and current pathways throughout appliance frames.

Reinforced flexing sections bend without kinks accommodating shifting door movements. While connector joints remain snug against jostling. This daisy chain design simplifies diagnostics and maintenance procedures compared to individual wiring. 

Symptoms signaling the need for a new harness include:

• Intermittent cycle malfunctions indicating loose or corroded connections  
• Broken or cracked housing exposing live conductors to shorting hazards
• Overly taut sections hindering the intended range of component motions

Causes relate to prolonged abrasion stresses and water damage compromising insulation throughout thousands of cycles. Physical damage during repairs may require a complete replacement of this integral wiring backbone.

This OEM Bosch replacement harness is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers relying on consistent control schemes. Reinstallation restores reliable electrical pathways.
 

This replacement hose channels water between assemblies inside your appliance to keep cycles running smoothly and leak-free. Replacing a brittle, cracked, or leaking hose restores proper water flow and helps prevent puddles or water damage.

• Routes water between internal components during operation
• Maintains a sealed path to help prevent leaks
• Common failure symptoms: visible cracks or kinks, water leaking, standing water, or moisture under the unit
• Restores proper water flow when the original hose is worn, swollen, or loose at the fittings

• Disconnect power and turn off the water supply before servicing
• Place towels or a shallow pan to catch residual water
• Note routing and clamp positions; transfer existing clamps/seals if applicable
• Fully seat connections and tighten clamps; run a test cycle and check for leaks

The Holder is an OEM part for Bosch dishwashers. It secures and positions the dish rack inserts within the dishwasher rack, ensuring proper alignment and stability during the washing cycles.

This holder is designed to withstand the rigors of repeated dishwashing cycles, helping to maintain the integrity of the inserts and prevent them from shifting or becoming dislodged. 

Causes of a bad holder can include wear and tear over time, exposure to excessive heat or moisture, or physical impact that may cause deformation or cracking.

Symptoms of a bad holder include:

• Inserts becoming loose or misaligned
• Excessive noise or rattling during wash cycles
• Potential damage to dishes due to rack instability

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The operating module is an OEM replacement part for Bosch dishwashers. It is responsible for the user interface and program control functions. Over time, control boards can fail due to power surges, electrical shorts or water damage. 

Symptoms of a faulty control board include: 

• Buttons not responding
• Blank display
• Not starting 

Replacing the defective board restores full functionality of the dishwasher controls. This OEM part is also compatible with Bosch, Thermador, Gaggenau and some Kenmore models.

This replacement push button installs in the control panel and provides a positive, responsive press. Replace it if the original button is cracked, missing, loose, or sticks and controls don't reliably register.

• Serves as the finger-operated actuator for the control switch behind the panel
• Helps ensure selections register when pressed
• Typical symptoms: cracked or missing cap, sticking or hard-to-press action, loose/wobbly feel, or unresponsive selection

• Disconnect power to the appliance before servicing
• Access the control panel and release the old button from its retaining tabs/clips
• Align and snap the new button into place so it travels freely and actuates the switch
• Reassemble and test operation

The Insulating Part is an OEM part for Bosch dishwashers. It is located within the bottom interior door panels to insulate this area. Proper insulation helps minimize noise transmission and prevents heat loss through the bottom door.

Causes of a bad insulating part may be normal breakdown over time from repeated door openings and closings or accidental damage from debris or sharp objects left in the bottom door well area.

Symptoms of a bad insulating part include:

• Noticeably warmer bottom door surface after a cycle, indicating heat loss
• Louder noise heard emanating from the lower door area
• More condensation or moisture detected inside lower door panels
• Faster reduction of interior temperatures in lower door area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Holder is an OEM component specifically designed for Bosch dishwashers. It secures serveware and accessories safely inside the tub during wash cycles. Flexible yet durable prongs provide adjustable containment for maximum loading efficiency.

Causes of a bad holder can include normal wear and tear until prongs warp or weaken, inhibiting proper holding. Damage from loading large pots may also cause replacement needs.

Symptoms of a bad holder include:

• Serveware that shifts or falls during washing, resulting in noisy cycles  
• Containment prongs that are loose, misshapen, or cracked from use
• Reduced loading capacity

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace yours to optimize organization and minimize breakage during every wash.
 

The Detergent Dispenser Seal is an OEM part for Bosch dishwashers. Located inside the detergent dispenser compartment, it creates a water-tight barrier, preventing premature detergent dissolution and leaks. Working seamlessly with the dispenser system, the seal facilitates controlled detergent release for optimum cleaning performance cycle after cycle. 

Causes for a bad detergent dispenser seal can include wear and tear from repeated use, deformations due to temperature fluctuations, and cracks or splits from general use.  

Symptoms of a bad detergent dispenser seal include:

• Detergent residue or puddles inside the dishwasher  
• Premature detergent dissolution before the main wash
• Leaks or drips from the dispenser area when closed
• Ineffective or inconsistent cleaning ability

This genuine Bosch detergent dispenser seal replacement will restore its water-tight barrier. It is also compatible with some Thermador, Siemens, and select Kenmore models.

The Sump is an OEM part for Bosch dishwashers. It is located at the bottom of the dishwasher's tub, responsible for filtering and recirculating water during the wash cycle. The sump is designed to collect and filter out food particles and debris from the water, ensuring that only clean water is circulated throughout the dishwasher. It also houses the circulation pump, which propels the water through the spray arms to effectively clean your dishes.

A bad sump can occur due to clogs, damage, or wear and tear over time. Signs of a faulty sump include poor cleaning performance, water not draining properly, or unusual noises during operation.

Symptoms of a bad sump include:

• Food particles or residue left on dishes
• Water not draining properly 
• Unusual noises during operation

Replace your faulty dishwasher sump with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Leveling Leg is an OEM replacement part for Bosch dishwashers. It permits adjustment to compensate for uneven floor surfaces, leveling the dishwasher, and ensuring proper drainage. Precise leveling facilitates water collection and effective cleaning performance. 

Symptoms of a bad leveling leg can include broken or stripped threads preventing adjustment, and conditions that promote rocking during operation. 

Causes of a bad leveling leg include:

• Loose or unstable mounting where legs spin freely  
• Legs unable to securely lock into position once adjusted   
• Drainage issues such as standing water or poor rinsing
• Excessive vibration or noise heard from the leveling area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This door latch interlock secures the appliance door and signals the control when it's safely closed, allowing cycles to start and run without interruption. Replacing a worn latch restores reliable starts and proper safety interlock function.

• Locks the door closed during operation to prevent interruptions
• Sends a "door closed" signal to the control so a cycle can start
• May resolve issues like failure to start or stopping when the door is bumped
• Helpful when the door won't click shut or shows a "door open" alert

• Disconnect electrical power at the breaker before servicing
• Open the door and remove the inner-door screws to access the latch area
• Move connectors one at a time to the new latch; ensure each is fully seated
• Reassemble, verify the strike aligns for a positive "click," and run a short test cycle

This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.

• Fastens components to the appliance frame or assemblies
• Replaces a missing, stripped, or rusted original screw
• Helps reduce rattling or vibration from loose hardware
• Restores proper alignment of panels or brackets

• Disconnect power and shut off water before servicing
• Refer to your model's parts diagram to locate and place
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening

The Power Cord is an OEM part for Bosch dishwashers. It provides electrical connection between the appliance and the power source to allow operation.

The power cord contains multiple insulated wire conductors capable of safely transferring electrical current at the proper voltage, fuse rating, and amperage required by the dishwasher motor and components. It terminates in a three-prong plug compatible with standard 110-120 volt outlets.

Symptoms of a bad power cord can include:

• The dishwasher failing to power on when plugged in
• Tripped circuit breakers or blow fuses each time the dishwasher runs
• Worn, cracked, cut or damaged outer insulation exposing wires
• Loose, disconnected or corroded connections at either end of the cord

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.