Shx8er55uc Parts

Threaded nut used to secure components on a bolt or stud inside your appliance. Replacing a stripped or missing nut restores proper clamping force and helps prevent loosening from vibration, temperature changes, and normal operation. What it does:

• Secures parts together on a threaded fastener to maintain alignment and clamp load
• Resists loosening from vibration and heat cycles when properly tightened
• Helps prevent rattling, leaks, or shifting components caused by loose hardware
• Replace if threads are worn, rounded, corroded, or the nut will not hold torque

• 1 nut

• Disconnect power and shut off water or gas to the appliance before servicing
• Support the component and start the nut by hand to avoid cross-threading
• Tighten with the correct tool to the manufacturer's specified torque; do not overtighten
• Replace companion washers/gaskets if required by the service manual and confirm alignment before final tightening

The Indicator Light is an OEM part for Bosch dishwashers. It serves as a visual cue, providing important status updates and notifications related to the dishwasher's operation.

Causes of a malfunctioning Indicator Light can stem from issues with the control board or wiring harness that powers the light, or the light itself burning out due to age or electrical surges.

Symptoms of a bad Indicator Light include:

• The light not illuminating at all, even when it should be on
• Flickering or dimming of the light during operation
• The wrong indicator light turning on or staying on inappropriately

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This factory fastener secures panels, brackets, and internal components in your appliance. Replacing a missing or damaged screw restores a snug fit, reduces vibration and rattles, and keeps assemblies properly aligned during service or reassembly.

• Anchors panels, trim, and internal parts to the appliance frame or subassemblies
• Helps prevent vibration, buzzing, and loose or shifting components
• Ideal replacement for lost, stripped, or corroded hardware
• Common symptoms include loose panels, gaps, rattling noises, or parts that won't stay secured

• Disconnect power and shut off water or gas before servicing
• Match this screw to the original and replace one-for-one in the same location
• Start threads by hand to avoid cross-threading; use the correct driver and do not overtighten
• Inspect the mating clip/insert; replace if stripped or damaged for a secure hold

The Operating Module is an OEM replacement part for Bosch dishwashers. As the main processor, it directs water circulation, temperatures, cycle times, and more according to programmed instructions. Located internally, the operating module receives inputs to coordinate cleanings.  

Causes of a bad operating module typically include failures over time from continuous operations in a wet environment. Water exposure can corrupt electronic circuitry within the sealed casing. 

Symptoms of a bad operating module include:

• Failure to start or switch cycles as intended
• Error codes or lights signaling control malfunctions
• No response to user inputs at the control panel
• Incomplete or shortened wash cycles instead of customized settings

Replacing your operating module with this genuine OEM part restores the dishwasher's full functionality. Proper cycle management keeps dishes sparkling clean for years. It ensures continued reliability and is also compatible with Thermador, Gaggenau, and select Kenmore models.

This micro filter is a fine-mesh replacement filter that traps food particles and debris in the dishwasher sump, helping maintain wash performance and protect the pump and drain from clogs. What it does:

• Captures small food particles to prevent recirculation and reduce spotting
• Helps keep the dishwasher drain and pump from clogging
• Supports consistent water flow for better cleaning results
• Can reduce odors caused by trapped debris in the filter area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack to access the sump area; follow your owner's manual for filter removal
• Ensure the filter is properly seated and locked before running a cycle
• Clean surrounding areas and inspect for additional debris while replacing the filter

The Power Supply Unit is an OEM part for Bosch dishwashers. This part is responsible for supplying the necessary power to your dishwasher. It delivers reliable and consistent power to all the electrical parts of your dishwasher.  

A bad power supply unit can occur due to electrical faults, power surges, or normal wear and tear over time. Signs of a faulty power supply unit include the dishwasher not turning on, intermittent power loss, or electrical issues within the dishwasher.

Symptoms of a bad power supply unit include:

• The dishwasher not turning on 
• Intermittent power loss  
• Flickering lights  

Replace your faulty dishwasher power supply unit with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This stud secures internal components and panels, providing a threaded anchor point that keeps parts aligned and stable for safe operation. It's a simple replacement that restores proper mounting when the original stud is missing, cracked, or stripped. What it does:

• Provides a threaded attachment point for securing panels, terminals, or assemblies
• Restores stable mounting when a factory stud is broken, bent, or stripped
• Helps eliminate rattling or loose connections caused by missing hardware
• Allows safe reassembly after service or part replacement

• Disconnect power and follow all safety procedures before servicing the appliance
• Use the correct size wrench or socket; thread carefully to avoid cross-threading
• Do not overtighten—tighten to snug fit consistent with surrounding hardware
• Repair or replace the mating component before installing

Replacement cable supply that routes electrical power between the appliance terminal and internal components. Replaces damaged or worn supply wiring to restore secure connections and reduce intermittent power or component failures. What it does:

• Carries electrical power from the appliance terminal block to internal controls and motors.
• Use when the appliance won't power on, has intermittent power, or internal components lose power.
• Replace if wiring is frayed, melted, scorched, or connectors are loose or corroded.
• Reduces risk of arcing or overheating caused by damaged conductors.

• Disconnect all power to the appliance before beginning any service work.
• Match connector orientation and secure all terminals; ensure crimps and connectors are fully seated.
• Route cable away from sharp edges, moving parts, and heat sources; use existing clips or ties.

This replacement dishwasher door handle restores a secure, easy-to-grip place to open and close the door, improving usability and appearance. Designed to match the original fit and mounting style for straightforward swap-out. What it does:

• Replaces a cracked, bent, or missing door handle so the door can be opened and closed safely
• Provides a solid grip to prevent slips and reduce stress on the door panel
• Restores factory appearance when the original handle is damaged or worn
• Helps prevent further cabinet or door edge damage from makeshift grips

• Disconnect power to the appliance before starting any repair to avoid injury
• Many installations require removing the inner door panel to access mounting screws; keep hardware organized
• Use basic hand tools (screwdriver, nut driver) and avoid overtightening fasteners to prevent damage

This holder secures internal components to keep assemblies aligned and stable, reducing vibration and wear. It's a simple replacement that restores proper fit where a broken or missing clip causes loose panels or noisy operation. What it does

• Secures and aligns panels or wiring harnesses inside the appliance
• Prevents rattling, vibration, and misalignment caused by damaged or missing clips
• Helps maintain proper component spacing to avoid wear or interference
• Restores secure attachment after breakage or plastic fatigue

• Disconnect power and water before starting any repair
• Remove access panels or trim to reach the damaged clip—keep fasteners organized
• Press or snap the holder into place; replace any broken tabs before reassembling
• If plastic anchors are damaged, replace them with matching OEM clips

This replacement worm gear is a small plastic drive gear that transmits rotational motion between the motor and driven components, restoring normal gear-driven movement and reducing slipping or grinding. What it does:

• Transfers torque from the motor to the mating gear or gearbox for proper mechanical operation
• Replaces worn, stripped, or damaged worm teeth that cause slipping or loss of drive
• Stops grinding, clicking, or intermittent movement when the gear is the fault
• Helps restore smooth, consistent operation of the driven mechanism when installed correctly

• One worm gear

• Disconnect power to the appliance before beginning any repair
• Inspect mating gears and shafts for wear; replace worn parts to prevent repeat failure
• Use OEM-approved lubricant only where specified; do not force or overtighten mating components

This replacement insert restores proper fit and finish for the appliance's front panel or trim, helping stop rattles and gaps for a cleaner look and secure fit. Fits into a dedicated mounting location to support adjacent panels. What it does

• Provides a finished edge or filler where panels meet, improving appearance.
• Helps align and stabilize the front panel or trim to reduce vibration and noise.
• Prevents small gaps that can catch dirt or interfere with door/panel movement.
• Works with existing clips or screws to maintain correct panel positioning.

• Disconnect power to the appliance before removing or installing trim or panels.
• Handle trim pieces carefully to avoid scratching the finish.
• Installation typically uses existing clips or screws; retain hardware and reference the service manual.

This sealing is a molded rubber gasket that provides a watertight barrier where two appliance components meet, helping prevent leaks and water damage. It's a direct-fit replacement when the original seal is cracked or worn. What it does:

• Creates a watertight seal to help prevent leaks during operation
• Restores proper sealing where the original gasket has become brittle, torn, or flattened
• Helps maintain appliance performance by keeping water inside the wash/tub area
• Reduces risk of water damage to cabinetry or floors from failing seals

• One sealing

• Disconnect power and water supply before beginning any repair
• Verify mating surfaces are clean and dry; remove any old sealant or debris for a proper fit
• Inspect the replacement for damage before installing and align evenly to avoid pinching

The Control Module is an OEM part for Bosch dishwashers. It is responsible for controlling receiving and interpreting signals from the control panel and other sensors in the dishwasher. It coordinates the timing and sequencing of different components, such as the motor, water inlet valve, and heating element.

A bad control module can occur due to electrical malfunctions, power surges, or component failure. Signs of a faulty module include the dishwasher not starting, error codes on the display, or erratic behavior during the cycle.

Symptoms of a bad control module include:

• The dishwasher not starting or responding 
• Error codes displayed
• Interruptions of the cycle

Replace your faulty control module with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Panel-Facia is an OEM part for Bosch dishwashers. As the interface hub, the panel-facia houses control buttons, display screens and cycle selectors.

The panel maintains an attractive surface while clearly presenting settings. Integrated features allow customization of washes for any load.

Causes of a bad panel-facia can include normal wear from thousands of wash cycles. Exposure to hot steam, splashes and cleaning chemicals introduces surface deterioration risks over time. Accidental impacts also threaten damage.

Symptoms of a bad panel-facia include:

• Non-responsive or inaccurate touch buttons
• Faded graphics, overlays or illuminated indicators
• Loosen mounting attachment points
• Moisture intrusion leading to component failure

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.