Shx9pt75uc Parts

The Dishwasher Handle End Cap is an OEM part for Bosch dishwashers. This part provides a finishing touch to the dishwasher's door handle, covering the ends for a smooth, finished appearance. Over time, these end caps can become lost, damaged, or worn, affecting the overall look and use of the dishwasher.

Symptoms of a bad Dishwasher Handle End Cap include:

• Missing or loose end caps
• Visible damage or wear 
• Diffiuculty opening the door

Causes of a bad handle end cap can range from accidental damage during cleaning or use, to natural wear and tear from repeated handling. 

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

Trim strip that finishes and protects an appliance edge while helping hold panels or seals in place. Replacing a damaged strip restores a clean fit and reduces gaps, vibration, and exposure to sharp edges. What it does:

• Covers and protects exposed metal or panel edges — symptom: visible edge damage or chipping.
• Helps secure panel or seal edges to maintain proper fit — symptom: loose or gapped panels.
• Reduces noise and vibration between parts — symptom: rattling or buzzing during operation.
• Helps limit moisture or debris intrusion where panels meet — symptom: dampness or dirt accumulation along seams.

• Disconnect power to the appliance before starting any work; follow lockout/tagout if applicable.
• Remove the old strip and any adhesive or fasteners; inspect the mounting surface for damage.
• Align the replacement strip, then press or snap it into position; some applications may require clips or screws.

This spindle is the rotating shaft that transfers motion between the motor/gearbox and the appliance's moving components, restoring proper rotation and alignment for reliable operation. Fits as a direct replacement when the original spindle is worn or broken. What it does:

• Connects and transmits rotational force from the drive assembly to the appliance's moving part
• Maintains alignment and smooth rotation for consistent performance
• Can stop wobble or intermittent movement caused by a bent or damaged shaft
• Helps restore normal operation if the original spindle is cracked, worn, or seized

• Intended for users comfortable with appliance repair; unplug appliance and shut off water before starting
• Inspect related seals, bearings, and mounting hardware; replace if damaged
• Use correct tools and torque per manufacturer guidance; avoid forcing components to prevent damage

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This bearing clip secures a drum/tub bearing assembly to keep the bearing properly seated, helping maintain stable drum rotation and reduce wobble. Replace a worn or broken clip to restore correct bearing alignment. What it does:

• Holds the bearing in position so the drum/tub spins smoothly
• Prevents the bearing from shifting or slipping out of its mounting
• Can help reduce noise and wobble caused by a loose bearing
• Works as part of the bearing support system for the washer/drum assembly

• Recommended for installers or experienced DIYers; the correct service panels are removed before accessing the bearing area
• Disconnect power and water supply before beginning any repair
• Inspect adjacent bearings, seals, and mounting surfaces for wear and replace as needed
• Use proper tools to avoid damaging the clip or surrounding components during removal and installation

A narrow trim strip that finishes and protects an appliance panel edge, giving a clean look while covering gaps and edges. It helps keep dirt out of seams and improves the appliance's appearance. What it does:

• Covers exposed panel edges for a finished, seamless appearance
• Protects against dirt and debris entering narrow seams
• Helps prevent snagging on the panel edge during use
• Can reduce light or airflow through small gaps around the panel

• One trim strip

• Disconnect power to the appliance before performing any work
• Trim or align the strip carefully to avoid damaging the finish
• May attach with clips or adhesive; keep any original fasteners for re-use

This insert is a direct replacement accessory that restores proper fit and trim where panels or components meet, helping stop rattles and maintain alignment for a clean, secure fit. Ideal when the original insert is cracked, worn, or missing. What it does

• Provides a stable seating surface for adjacent trim, panels, or components to prevent gaps and movement
• Helps eliminate rattling or vibration caused by a loose or missing insert
• Restores proper alignment to maintain sealing and appearance
• Fits into the factory mounting location; matches OEM shape and contour

• One replacement insert

• Power off and disconnect the appliance before attempting any repair
• Remove adjacent trim or fasteners as needed to access the original insert
• Press or seat the new insert into the factory cavity until fully engaged; some inserts may use clips or screws

This sealed bearing supports a rotating appliance drum or shaft, reducing friction for smoother operation and quieter performance. It replaces a worn bearing to help address noise, wobble, or vibration during spin cycles. What it does:

• Supports and guides the rotating tub or shaft for smooth, stable rotation
• Reduces metal-to-metal contact to prevent grinding noises and excess wear
• Helps minimize vibration and wobbling that can indicate a failed bearing
• Preserves alignment of drum components to maintain efficient operation

• Disconnect power and water before servicing for safety
• Bearing replacement often requires disassembly of the drum/housing and special tools; handle with care to avoid damage
• Inspect nearby seals, shafts, and mounting hardware and replace if worn or damaged

This base panel is the lower front trim that covers and protects the appliance kick area while giving a finished look. It restores the cabinet's appearance and shields internal components from dust and debris. What it does:

• Covers the appliance lower front to hide internal frame and hardware
• Protects kick area from scuffs, dust, and pet access
• Helps maintain a finished, factory appearance after repair
• Stops drafts or light entering under the appliance when fitted

• Install with the factory fasteners or clips; avoid forcing or bending the panel
• Turn off and unplug the appliance before removing lower access pieces to avoid contact with electrical components
• Check alignment and fastener fit before tightening to prevent cracking the trim
• Replace any missing or broken clips or screws with OEM parts for proper fit

This control module (programme) is the main electronic board that manages cycle selection and machine functions, restoring proper control to affected appliances. Replaces a faulty programme board to help return normal program sequencing and user interface response. What it does

• Interprets user inputs and runs selected wash/spin/dry programs
• Sends control signals to motors, valves, heaters, and sensors
• Can stop or prevent cycles when internal faults are detected
• Common symptom: appliance won't start, displays error codes, or programs won't advance

• One control module (programme) board

• Disconnect power before attempting replacement to avoid shock or component damage
• Handle the board by edges and avoid touching exposed circuitry; protect against static discharge
• Verify connectors and ribbon cables are fully seated; confirm correct orientation before securing

This moisture shield protects internal components from water and condensation, helping prevent moisture damage that can cause corrosion or electrical problems. Simple replacement maintains proper moisture control and appliance reliability. What it does:

• Redirects or blocks water and condensation away from sensitive parts
• Helps prevent shorting, corrosion, and moisture-related failures
• Supports normal drainage and airflow in the affected area
• Restores the appliance's original moisture-protection layout after damage or wear

• One moisture shield

• Replace with the appliance powered off and unplugged for safety
• Inspect mounting tabs and surrounding seals; replace any damaged fasteners
• Position the shield exactly as the original part to maintain drainage paths
• Address affected components before reassembly

This replacement holder secures internal components in place to help maintain proper alignment and reduce movement. Replacing a damaged holder restores stable fitment and helps cut down on noise from loose parts. What it does

• Secures and positions internal components or assemblies to maintain correct alignment
• Prevents excess movement that can cause rattling or intermittent contact
• Helps ensure other parts operate without binding or shifting
• Use when the original holder is cracked, broken, or missing

• Disconnect power before servicing to avoid shock or injury
• Inspect surrounding components and replace any damaged fasteners or clips
• Hand-fit the holder and secure per the appliance's service instructions; avoid forcing parts into place