Shxm4ay52/01 Parts

This stress relief is a small strain-relief clip that protects wiring where the harness passes through the cabinet, reducing pull and chafing on connections. Replacing a worn clip helps prevent loose wires and intermittent electrical issues. What it does:

• Secures the appliance wiring at an entry point to reduce strain on terminals and connectors.
• Prevents chafing and abrasion of wire insulation where harnesses pass through the cabinet or mounting openings.
• Can reduce symptoms such as intermittent power, flickering controls, or visible loose/frayed wires at the harness.
• Simple mechanical part: no electrical function but critical for long-term wiring reliability.

• Disconnect power (unplug appliance or switch off breaker) before accessing wiring; turn off gas supply where applicable.
• Remove panels as needed to access the harness entry; seat the clip fully so wires are routed through the relief, not pinched.
• Inspect surrounding wiring and replace any frayed or damaged wires; do not use the clip to conceal damaged wiring.

This cover is a molded protective housing that replaces a cracked or missing outer piece to restore a secure fit and protect internal components from debris and damage. It helps keep wiring and small parts shielded during normal use. What it does:

• Protects internal components and wiring from dirt, moisture, and impact
• Restores proper fit and alignment where a damaged cover allowed movement or rubbing
• Reduces rattles or vibration caused by loose or broken housing pieces
• Keeps serviceable parts accessible while maintaining a finished appearance

• One cover

• Disconnect power to the appliance before starting any repair
• Remove any access panels or fasteners that obstruct the old cover
• Align the replacement cover with mounting tabs or screw holes and secure using original fasteners
• If clips or tabs are damaged, replace them before completing reassembly; inspect surrounding parts for damage

This adjusting device helps align and fine-tune moving parts so doors and components operate smoothly. It's a direct-fit replacement designed to restore proper adjustment and reliable positioning for compatible Bosch appliances. What it does:

• Provides precise adjustment of movable assemblies to correct alignment issues
• Helps reduce binding, rubbing, or uneven gaps at doors or panels
• Restores intended movement and positioning for better operation
• Works as the factory replacement part specified for alignment tasks

• One adjusting device

• Designed for direct replacement; use the appliance's service instructions or OEM guide for correct placement
• Turn off power to the appliance before servicing to avoid injury
• Keep fasteners and mounting orientation the same as the original part during installation

This replacement cup rack secures cups and small glassware on the dishwasher's upper rack, keeping items upright and preventing shifting during the wash for more consistent cleaning results. What it does:

• Provides dedicated support for cups, mugs and small glasses on the upper rack
• Helps prevent tipping, sliding and breakage during wash cycles
• Restores missing, cracked or warped cup-holding sections
• Compatible with dishwasher upper rack mounting points and clips

• One cup rack assembly

• Remove the upper rack for easier access; refer to your dishwasher manual for rack removal steps
• Align and snap the rack into the designated upper-rack mounting points; some models may use retaining clips or small fasteners
• Handle edges and clips carefully to avoid damage; wear gloves if needed

This support is a replacement mounting bracket that helps secure and stabilize internal appliance components for proper alignment and operation. Replacing a worn or broken support restores fit and reduces movement-related noise or malfunctions. What it does

• Holds internal components or assemblies in their correct position to prevent shifting during operation
• Restores proper alignment that can affect door fit, drawer travel, or rotating parts
• Reduces vibration and rattling caused by a loose or damaged support
• Suitable when the original support is cracked, bent, or missing

• One support as shown

• Disconnect power and, if applicable, water supply before beginning any repair
• Remove surrounding panels or assemblies as needed to access the support; keep fasteners for reassembly
• Inspect adjacent clips, screws, and mounting points; replace any damaged hardware

This lock clamp secures the dishwasher door latch assembly to help keep the door aligned and allow the latch to engage properly. Replaces a worn or broken clamp to restore reliable door closure and normal cycle starts. What it does:

• Holds the door latch/lock assembly in the correct position so the door can latch and the cycle can begin
• Commonly replaced when the door feels loose, the latch won't engage, or the door doesn't stay closed
• Helps prevent intermittent door-open errors caused by a misaligned or damaged clamp
• Works as part of the latch/lock system; does not include the entire latch or switch

• Basic hand tools typically required; disconnect power before starting and verify the appliance is powered off
• Remove inner door panel or access panel per manufacturer instructions to reach the latch area
• Handle sharp edges carefully; reassemble panels and test the door latch engagement before full use

This replacement hood canopy restores the exterior cover of the range hood to protect internal components and maintain proper ventilation performance and appearance. It's a direct-fit exterior panel that replaces damaged or dented hoods. What it does:

• Covers and protects internal fan, light, and wiring from grease and debris
• Channels exhaust airflow through the hood body to the vent system
• Restores proper fit and finish when the original hood is bent, dented, or corroded
• Helps reduce visible gaps and rattling caused by a damaged outer panel

• Disconnect power to the appliance before starting any work to avoid electrical shock
• Wear gloves and eye protection to guard against sharp edges and debris
• Removal/installation may require basic hand tools and a second person to support the panel
• Follow the appliance manufacturer's service instructions for proper alignment and fastening