Shxm78wn/01 Parts

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

This holder/retainer secures its mating part in the correct position inside the appliance, preventing unwanted movement and ensuring consistent operation. Replace a cracked or missing holder to restore a solid, factory fit and reliable performance.

• Supports and locks the attached component or rack/accessory in place
• Helps prevent vibration, rattling, or misalignment during use
• Typical signs of failure: broken tabs, visible cracks, looseness, or the part no longer staying secured
• Restores proper positioning of the related component for consistent function

• Disconnect power at the breaker; shut off water supply if applicable
• Note the holder's orientation; take a photo before removal
• Reuse existing screws/fasteners if none are supplied with the part
• Seat fully until it clicks/locks; do not overtighten into plastic

This insulating part provides protective thermal and electrical insulation for internal appliance components, helping keep wiring and nearby parts separated and shielded. Replacing a damaged insulator restores safe spacing and reduces heat-related wear. What it does:

• Provides thermal and electrical isolation between components to help prevent heat transfer and accidental contact
• Protects wiring and nearby parts from chafing and abrasion
• Helps reduce risk of shorts or intermittent electrical faults when insulation is intact
• Common symptoms of a bad or missing insulator: visible damage, melting or scorch marks, exposed wiring, or intermittent operation

• Disconnect power to the appliance before servicing to avoid electric shock
• Remove any necessary panels to access the damaged insulator
• Handle carefully to avoid tearing or compressing the material; replace with the identical part number

This is a replacement door handle for Bosch appliances that restores a secure grip and original appearance to a worn, cracked, or broken handle. It helps make opening and closing the appliance door easier and safer. What it does:

• Replaces a damaged or loose door handle so the door can be opened and closed reliably
• Restores proper user grip and door alignment when original handle is cracked or stripped
• Helps prevent injury from sharp edges on broken handle pieces
• Improves the appliance's exterior appearance when the original handle is worn or cosmetically damaged

• Basic hand tools needed; keep fasteners and trim pieces organized for reassembly
• Disconnect power to the appliance before starting work if panels or wiring will be exposed
• Handle screws may be hidden under trim—refer to model-specific service instructions for removal steps
• If mounting points are damaged, inspect surrounding trim and fasteners for proper repair

This insulating part provides a thermal and electrical barrier to protect nearby components and wiring from heat and to help reduce vibration-related contact. It's a simple replacement that restores safe spacing and insulation. What it does:

• Acts as a heat shield to limit heat transfer to adjacent parts and wiring
• Provides electrical insulation to prevent shorting where components are close
• Helps reduce rattling by stabilizing/isolating panels or components
• Supports proper component spacing for safe operation

• Disconnect power to the appliance before starting any repair
• Replace only in the exact original location and orientation
• Handle gently to avoid tearing or compressing the material
• If mounting hardware is damaged or missing, replace hardware per OEM instructions

This facia panel is the exterior front trim that covers the appliance door, restoring a clean finished look and protecting internal components. It replaces cracked, dented, or cosmetically worn door facia for a like-new appearance. What it does

• Replaces the outer door facia to restore the appliance's exterior finish
• Conceals and protects control assemblies and inner door components
• Helps prevent dirt and moisture from reaching internal door parts
• Addresses visible damage such as cracks, dents, deep scratches, or peeling

• One facia panel

• Disconnect power and water before starting any repair
• Door disassembly may be required; support the door and follow the appliance service manual
• Use correct fasteners and alignment to avoid binding; confirm clips and screw locations before tightening

This replacement frame restores the appliance's front cabinet trim for a clean, finished appearance and helps secure the control panel and door assembly. It's a direct-fit exterior trim piece designed to return proper alignment and protection. What it does

• Provides structural support and alignment for the front panel and control area
• Covers and protects internal edges from dirt, moisture, and impact
• Helps stop rattling or vibration caused by a warped or damaged trim
• Common symptom: visible damage, cracks, loose or misaligned front trim

• Remove power to the appliance before starting work to avoid electrical shock
• Small hand tools typically required; follow OEM disassembly sequence for access
• Handle trim carefully to avoid scratches; use a soft surface to rest parts
• If clips or screws appear damaged, replace them separately.

This single-use dishwasher cleaner removes limescale, grease and odor-causing residue from the interior and spray arms to help restore cleaning performance. It's designed for routine maintenance between deep-clean services. What it does:

• Dissolves limescale, hard-water buildup and mineral deposits that can reduce spray-arm flow and detergent action
• Breaks down grease and food film that cause lingering odors or cloudy glassware
• Helps clear residue from seals, filter housing and spray nozzles for more consistent wash results
• Safe for use in dishwasher tubs and internal components when used as directed

• One single-use bottle of dishwasher cleaning solution

• Follow the dishwasher maker's directions: typically empty dishwasher, place bottle in the rack or dispenser, run the specified cleaning cycle
• Use only as directed; do not mix with other chemicals or detergents
• Keep out of reach of children and pets; avoid contact with skin and eyes — rinse thoroughly if contacted
• Dispose of container per local regulations after use

This is a replacement screw used to secure panels, trim pieces, and small brackets on compatible Bosch appliances — a simple hardware fix that restores proper fit and stops rattling or loose parts. What it does:

• Fastens outer panels, control bezels, or internal brackets to the appliance chassis
• Keeps panels aligned so doors and controls fit and operate correctly
• Stops vibration noise caused by loose or missing fasteners
• Replaces damaged, stripped, or corroded screws

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand to start, then snug; avoid over-tightening which can strip threads or crack panels
• If threads are damaged, replace the mating nut or threaded insert per OEM guidance

This access cover replaces a damaged or missing exterior panel to restore proper fit and protect internal components from debris and moisture. It helps maintain appliance appearance and prevents accidental contact with internal parts. What it does:

• Covers and protects internal components at the specified access point
• Helps prevent debris buildup and accidental contact with wiring or moving parts
• Restores a secure mounting surface for adjacent panels or controls
• Reduces rattles or vibration caused by a loose or broken cover

• One replacement cover (1 piece)

• Disconnect power to the appliance before beginning any work
• Installation may require basic hand tools; handle edges carefully to avoid cuts
• Align mounting tabs and fasten with the factory screws or clips; do not overtighten