Smu7056uc Parts

This replacement silverware basket holds forks, knives and spoons so utensils stay organized and clean during the dishwasher cycle. It restores a convenient, secure place for cutlery and helps prevent nesting for better wash coverage. What it does:

• Holds and separates silverware to improve cleaning and prevent items from nesting
• Provides a removable container that stays in place during wash cycles
• Fits into the lower rack to keep utensils contained and easy to unload
• Helps protect small items from falling to the tub or blocking the spray arm

• No tools typically required; slides or snaps into the lower rack location
• Remove all dishes and power off/dry area before installing to avoid injury
• Inspect rack tines and basket clips for damage; replace if broken to ensure proper fit

This is the left side door hinge. For right side use 00086391.

This replacement sump hose routes wastewater from the dishwasher sump to the drain/pump assembly, restoring proper draining and preventing leaks. It's a direct-fit service part for repairing faulty or deteriorated drain connections. What it does:

• Carries water from the sump to the drain pump so the dishwasher can empty properly
• Replaces cracked, clogged, or collapsed hose sections that cause standing water
• Helps stop leaks that can occur when the hose degrades or separates at fittings
• Can resolve drain-related faults and clearing-cycle failures tied to poor flow

• One sump hose

• Disconnect power and water supply before starting any repair
• Inspect and replace any worn clamps or connectors; use manufacturer-recommended clamps
• Route the hose as original to avoid kinks and ensure secure connections at both ends
• After installation, run a short drain cycle and check all connections for leaks

The Drain Motor Assembly is an OEM part for Bosch dishwashers. The drain motor assembly is responsible for draining dirty water from wash cycles and filling the dishwasher with clean water for the next use.

Symptoms of a bad drain motor assembly can include:

• Dishwasher failing to completely drain wash water
• Continuous running or buzzing drain motor sounds
• Accumulation of standing water at the bottom

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This door seal is the flexible gasket that runs around the dishwasher door opening to help keep water inside the tub during a wash cycle. It restores a secure, watertight seal and reduces leaks and drips. What it does:

• Provides a watertight barrier between the door and tub to prevent leaks during operation
• Cushions the door edge for quieter closing and helps maintain consistent wash performance
• Worn, cracked, or flattened seals can allow water to drip or pool at the dishwasher base
• Replacing a damaged seal helps protect cabinetry and flooring from water damage

• High-level replacement: remove the inner door panel or trim as required, pull out the old seal, and press the new seal into the channel
• Inspect the gasket channel for debris or damage before installing the new seal
• Ensure the seal is fully seated and the door closes evenly to avoid pinching or gaps
• Disconnect power and water if removal of panels exposes electrical or plumbing connections

This rubber gasket seals appliance openings to help prevent water and air leaks and restore proper door/tub sealing. It replaces a worn or damaged seal to reduce leaking and maintain normal appliance performance. What it does

• Creates a watertight/airtight barrier between mating surfaces to prevent leaks.
• Helps maintain operating temperature and efficiency by sealing the door/tub.
• Common symptom: visible water around the door or base during use.
• Common symptom: cracked, flattened, or distorted seal material that no longer compresses.
• Works as a direct replacement for the matching OEM seal when damaged or worn.

• One gasket as shown on the product page.

• Turn off power and water supply to the appliance before starting any repair.
• Remove the old seal carefully, clean the mounting channel of debris and residue, and inspect the mating surface.
• Press the new gasket evenly into the channel, starting at one corner and working around to ensure full seating without twists.
• Test the door closure and run a short cycle to confirm there are no leaks; re-seat if necessary.

This thermostat (124°F) is a temperature control switch that helps an appliance maintain its designed operating temperature, protecting components and improving performance when the original control fails. What it does:

• Closes or opens the circuit at about 124°F to regulate appliance temperature
• Restores proper on/off cycling when a failed thermostat prevents heating or cooling
• Helps prevent overheating or inadequate temperature by signaling the appliance control
• Commonly related to issues such as temperature not reaching setpoint, intermittent heating, or unit cycling too frequently

• Disconnect power before inspecting or replacing the thermostat to avoid shock or damage
• Handle terminals and sensing elements carefully; verify proper orientation and seating during installation
• Test the thermostat with a multimeter and refer to the appliance wiring diagram or service manual

Water valve elbow.