Spe68u55uc Parts

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This regeneration valve directs brine through your dishwasher's built-in water softener during recharge cycles, helping prevent hard-water film and spotting. Replacing a faulty valve restores consistent softening and better cleaning results.

• Opens to route salt brine through the ion-exchange resin during regeneration
• Helps maintain proper water hardness feeding the wash system
• Failure can lead to white film/spots, cloudy glassware, mineral buildup, and reduced cleaning
• Also contributes to inconsistent softener performance over time

• Disconnect power and turn off the water supply before servicing
• Access location varies by model; note hose routing and valve orientation during removal
• Inspect hoses and seals; replace if worn to prevent leaks
• Restore water/power and run a short cycle to check for leaks and proper operation

A direct-replacement control panel push button that restores reliable press feedback and user control on compatible Bosch appliances. Easy cosmetic fix for a worn, cracked, or non-responsive button to make the appliance usable again. What it does

• Replaces a damaged or worn push button on the appliance control panel.
• Restores tactile feedback so selections register properly.
• Helps resolve symptoms like a stuck, loose, or visibly cracked button.
• Preserves the original panel appearance when replaced.

• Disconnect power to the appliance before beginning any work.
• Usually installs from the front of the control panel; some models require removing the console or trim first.
• Handle small plastic pieces carefully to avoid breakage; keep screws and clips organized.

This water distributor routes wash water to the dishwasher's spray system, restoring proper circulation for thorough cleaning. It's a direct-replacement plumbing component used in compatible Bosch dishwasher models. What it does

• Directs incoming water to the spray arms and wash assembly for even distribution
• Helps restore normal spray pressure and coverage when the original distributor is damaged or clogged
• Works as the plumbing interface between the inlet/valve and internal wash components

• One water distributor

• Disconnect power and shut off the water supply before beginning service
• Handle plastic ports and mounting tabs carefully to avoid cracking; replace any worn seals or gaskets encountered
• Reassemble panels and test a short cycle to ensure proper water flow and no leaks

This small insert is a precision-fit piece that helps secure and align a mating component so it fits and functions properly. Replacing a worn or missing insert restores a solid connection and dependable operation. What it does:

• Provides a snug mounting/locating point for the related part
• Helps prevent looseness, rattling, or misalignment
• Restores proper fit after cracking, wear, or loss
• Common signs include a cracked or missing insert and parts that no longer stay in place

• 1 insert

• Disconnect power (and water supply, if applicable) before servicing
• Compare the new insert to your original to match and orientation
• Remove any broken fragments and clean the area before installation
• Press or snap into place carefully; do not force or overtighten any fasteners

This panel base is the lower front trim piece that supports and secures the appliance's toe-kick area, restoring a finished appearance and proper alignment of the lower front panel. Fits into the cabinet opening and stabilizes the front fit. What it does:

• Supports and aligns the lower front/toe-kick area so the front panel sits flush
• Prevents visible gaps or misalignment along the appliance base
• Reduces rattling or vibration from a loose lower trim
• Helps maintain the finished look and proper clearance at the cabinet floor

• Disconnect power to the appliance before beginning any work
• Remove the existing toe-kick or access panel to access mounting points
• Use basic hand tools to remove and reinstall fasteners; avoid overtightening
• Test fit the panel and proper alignment before restoring power

This inlet seal is a small rubber gasket that creates a watertight connection at the dishwasher's water inlet. Replacing a worn seal helps stop leaks and ensures the inlet valve can fill the appliance properly. What it does:

• Seals the water inlet connection to prevent drips or steady leaks underneath the dishwasher
• Maintains a tight seal at the inlet valve so the fill cycle can operate normally
• Commonly replaced when there is visible wear, cracking, or persistent water on the floor
• Helps avoid water damage and the nuisance of repeated drainage or fill errors tied to leaking

• One inlet seal

• Turn off the water supply and disconnect power before servicing
• Remove the inlet valve or access panel as needed to reach the seal; replace with the old seal removed
• Make sure the new seal is seated evenly and the mating surfaces are clean before reassembly

This panel base is the lower front kickplate that covers and protects the appliance's lower cabinet area while providing a finished appearance. It keeps debris out of internal components and restores the appliance's front styling. What it does

• Covers the lower front opening to protect internal components from dust, moisture, and debris
• Provides a finished, flush appearance at the appliance base and hides mounting hardware
• Helps prevent gaps that can allow pests or objects into the cabinet area
• Replaces bent, dented, rusted, or cosmetically damaged lower panels

• Disconnect power (and water if applicable) before starting work to reduce risk of shock or injury
• Remove the toe kick or lower access screws to access mounting points; keep fasteners for reinstallation
• Align the panel with mounting slots and secure with original screws; avoid overtightening to prevent distortion
• Handle carefully to avoid scratches or finish damage during installation

This sealing gasket replaces a worn or damaged seal to help prevent leaks and maintain proper sealing in the appliance. It restores a secure fit where the original seal has hardened, cracked, or lost flexibility. What it does:

• Provides a watertight seal at the mating surfaces to reduce leaks and drips
• Helps maintain proper pressure and containment of fluids during operation
• Prevents debris and odors from passing through compromised gaps
• Commonly replaced when visible cracks, flattening, or leaks occur

• Disconnect power and turn off water supply before starting any repair
• Remove the old seal carefully to avoid damaging surrounding parts
• Ensure mating surfaces are clean and dry before fitting the new seal
• Verify proper orientation and seating; do not use sealants unless explicitly specified by OEM

This replacement door switch completes the appliance's door-sensing circuit so the unit only runs when the door is closed. It restores proper door-detection and helps the appliance start and stop reliably. What it does

• Detects door open/closed state and completes the electrical circuit when closed
• Prevents the appliance from running with the door open
• Can resolve symptoms like controls not responding, cycle not starting, or the unit stopping unexpectedly when the door is closed
• Works as the direct electrical interface between the door/latch and the control system

• One switch

• Disconnect power before servicing to avoid electrical shock
• Access may require removing the control panel or door trim depending on model
• Handle wiring and connectors carefully; match wire locations before removal

This single-use dishwasher cleaner removes limescale, grease and odor-causing residue from the interior and spray arms to help restore cleaning performance. It's designed for routine maintenance between deep-clean services. What it does:

• Dissolves limescale, hard-water buildup and mineral deposits that can reduce spray-arm flow and detergent action
• Breaks down grease and food film that cause lingering odors or cloudy glassware
• Helps clear residue from seals, filter housing and spray nozzles for more consistent wash results
• Safe for use in dishwasher tubs and internal components when used as directed

• One single-use bottle of dishwasher cleaning solution

• Follow the dishwasher maker's directions: typically empty dishwasher, place bottle in the rack or dispenser, run the specified cleaning cycle
• Use only as directed; do not mix with other chemicals or detergents
• Keep out of reach of children and pets; avoid contact with skin and eyes — rinse thoroughly if contacted
• Dispose of container per local regulations after use