Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker not filling or water dispenser not working? This refrigerator water inlet valve controls water flow to both. DIY install in 10 minutes.
I replaced the water inlet valve. The toughest part was closing off the feed line while I waited for the valve to be delivered. The needle valve used to install the feed line wouldn't close completely. I ended up fabricating a plug from some parts from the hardware store. The mounting bracket on the new valve was completely different from the original, but it still mounted easily enough. The 1/4" plastic hose fitting was a different type from the original, but the hose fitted into it easily... Read more
Refrigerator not cooling or ice building up on evaporator coils? The defrost timer controls the defrost cycle. DIY-friendly, installs in 5 minutes.
We just had the Defrost Timer replaced less than 90 days ago. Called the appliance company who came to diagnose ($109) and it was the same part, (a $34 part). The part was warrantied, but not the service, which was $270. I saw them install the part in July... less than 5 minutes! The company told me that they bill not by time spent on labor, but according to the "national average" for that repair. They wouldn't give me the warrantied new part without doing the labor. I checked with... Read more
Replacement crisper drawer for storing vegetables and fruits in your refrigerator. Needed when original drawer is cracked, broken, or missing.
Ordered the proper parts with the help of appliance parts pros very quick shipment and fair pricing and the job is done. Thank you Read more
Fix a refrigerator that freezes food or runs too cold with this temperature control thermostat. Common DIY repair with video guide, typically done in 10-15 minutes.
I went on you tube to try and figure out what might be causing this problem. It seemed that the problem was either the temperature thermostat or the defrost timer. I figured that seeing as I had never ever seen any frost in the freezer that the problem probably wasn't the defrost timer. So I ordered the temperature control thermostat, received it the very next day and in ten minutes removed the old one and installed the new one and we were good to go. It's been working just fine for the last... Read more
Supportive shelf frame that covers and seals the crisper drawer area. Replace if cracked, broken, or warped to restore proper drawer support and organization.
Replace with new drawer cover. Read more
Replaces cracked, broken, or missing end caps on refrigerator door shelf supports. Snaps onto shelf bar ends for a finished look and secure fit.
Ordered replacement part, and installed it. Read more
Clear lower crisper drawer for refrigerator vegetable storage. Replace your cracked, broken, or missing drawer to restore organized produce storage.
I ordered a replacement drawer on a Friday afternoon and it was was delivered Saturday morning less than 24 hours later. Read more
Secures and seals water line connections in your refrigerator's dispensing system. Replace if leaking or loose to prevent water damage. Confirm fit.
Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more
Fixes heavy frost buildup on evaporator coils and warm fresh food compartment. Clips onto evaporator assembly. Straightforward DIY with video guide.
The defrost heater element looked good and had continuity. The defrost thermostats checked good, so that just left the Defrost Module as the likely suspect. I installed a new defrost control module and thermostats. The thermostats were inexpensive and the old ones could have been intermittent, The only "tricky" part was finding out how to get to the back screw that holds the main control panel. Discovered that the return air duct surrounding the control panel needed to come off. It helps... Read more
Fix a warm fridge or freezer ice buildup. This defrost heater melts frost on evaporator coils to restore cooling. Moderate DIY repair, 1-2 hours.
Replaced defrost heater, temperature and defrost limiter thermostat. After taking the cover off the air chiller I found the coils frozen solid and defrosted it with a hair dryer. Once defrosted I remover the heater coil to test it it was fine, then I could see the defrost limiter was broken and as I put the unit back together I broke the heater tube (it is glass) so I ordered all the parts that might be defective and replaced them for less than the charge of having some one come to check it out. Read more
Seals the fresh food door to maintain temperature and prevent air leaks. Replace if you notice condensation, frost buildup, or warm air entering. Confirm fit with your model number.
I checked the freezer and found the door gasket was damaged. When the parts arrived, I checked them for a good fit and the attachment method. Due to past experience of replacing door gaskets, I was expecting a lot of screws that would have to be removed and replaced. To my surprise, the gaskets pressed in place without tools and had a good and secure fit. The instructions the came with the gaskets suggested the hot water be used as needed to remove any kinks that might cause a poor fit. I... Read more
The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.
You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.
Symptoms of a bad light socket include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I researched the model and watched a YouTube video on the repair. I ordered the part. Two days later it arrived and I made the repair. I'm all thumbs in home repairs, but had it done in 5 minutes. My husband was surprised. Nice that I can take care of a few simple repairs around the house. Read more
Replacement dairy compartment door for refrigerator door storage. Needed when original is cracked, broken, or missing. Installs in door compartment.
Ordered the part, came in a few days, lined up the holes and it popped right in. Read more
The Lid Bumper is an OEM part for GE refrigerators. It is designed to provide cushioning and protection for the refrigerator lid, preventing damage and ensuring smooth, quiet closing.
Causes of a bad Lid Bumper can include deterioration over time due to frequent use, exposure to temperature variations, or damage from accidental impacts. A worn or damaged bumper may no longer provide adequate cushioning, leading to potential damage to the lid or the refrigerator itself.
Symptoms of a bad Lid Bumper include:
Changed fan motor, rubber grommets, and dust cover. It sounded like the vibrating sound was being caused by the motor. But, come to find out I had a chipped blade on one of the fan blades. So make sure and check the fan blade first. Thanks Appliance Parts Pros everything for just as it should. Read more
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more
Replacement handle for your refrigerator's fresh food compartment door. Needed when the original handle is cracked, broken, yellowed, or damaged at screw points.
Could not clean yellowed door handles. Knew re-paint would look cheap. Bought both GE factory handles with shipping for a very fair price and had them in 2 or 3 days during the Christmas rush. I will definitely buy from this company again. Read more