T24id80nrp Parts

The Housing is an OEM part for Bosch refrigerator and freezers. This part encases the water filter, ensuring it is securely positioned within the appliance to effectively filter out contaminants from the water supply. 

The need for replacing the Housing can arise from physical damage, such as cracks or breaks, which can occur from accidental impacts during filter changes or general wear and tear over time. 

Symptoms of a compromised Housing include:

• Leaks or dripping water near the filter area, indicating that the housing may be cracked or not sealing properly.
• Difficulty in installing or removing the water filter, which could suggest that the housing is damaged or warped.
• Unfiltered water taste or odor, hinting at an improperly seated filter due to a faulty housing.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This valve magnet is the solenoid coil used to actuate a dishwasher water/valve assembly, converting electrical control signals into mechanical valve movement for water flow control. It helps restore proper fill and drain sequencing. What it does:

• Energizes the valve assembly so the appliance can open or close water flow when commanded
• Restores valve actuation if the coil has failed or is not generating magnetic pull
• Commonly linked to symptoms like no water fill, intermittent filling, or valve that won't actuate
• Works as the electromagnetic component of the inlet/servo valve system

• Disconnect power and water supply before accessing or replacing the valve magnet
• Observe correct coil orientation and connector seating during reassembly

This water inlet valve controls water flow into the appliance, restoring proper fill and preventing unwanted leaks. Replacing a faulty inlet valve returns normal water supply and helps the appliance fill reliably. What it does:

• Opens and closes the water supply to the appliance when a cycle calls for water
• Stops water flow when the fill is complete to prevent overfilling
• Common symptom: appliance won't fill or fills slowly
• Common symptom: continuous or intermittent leaking near the inlet area
• Works with the appliance's control signals to regulate fill volume

• Disconnect power and shut off the water supply before starting any repair
• Drain residual water from hoses and fittings to avoid spills
• Inspect and replace any worn inlet hoses or seals when replacing the valve

This fixture is a small mounting clamp that secures internal components in place to keep them aligned and stable during normal appliance operation. It helps reduce movement and vibration for a quieter, more reliable appliance. What it does:

• Holds internal assemblies or wiring harnesses securely to prevent shifting
• Keeps parts properly positioned to maintain function and reduce wear
• Helps reduce rattling or vibration caused by loose components
• Supports safe, consistent operation by keeping components from contacting other parts

• Disconnect power and water supply before accessing internal components
• Basic hand tools may be required to remove panels and fasten the fixture
• Inspect surrounding clips and fasteners; replace any that are damaged

This fixture is a small mounting clip designed to secure internal components and panels so they stay correctly positioned during normal appliance operation. It helps reduce movement that can cause noise or misalignment. What it does:

• Secures and positions internal parts or panels to prevent shifting
• Reduces vibration-related noise by holding components firmly
• Helps maintain proper alignment for connected assemblies
• Common symptom: loose or rattling panels or parts that move during operation

• One mounting fixture

• Disconnect power to the appliance before starting any repair
• Use basic hand tools; avoid forcing the clip into place to prevent breakage
• Inspect mating surfaces and replace any damaged mounts or clips
• Test the appliance after installation to ensure the part holds components securely

The Defrost Heater is an OEM part for Bosch refrigerators. Strategically placed at the rear of the freezer compartment, it quickly removes frost and ice during automatic defrost cycles. The defrost heater utilizes precisely regulated currents to raise temperatures temporarily and expel moisture.  

Causes of a bad defrost heater may involve failures due to regular heating and cooling over countless cycles. Mineral or ice deposits can restrict filaments or warp sensitive components within.

Symptoms of a bad defrost heater include:

• Frost buildup despite automatic defrost mode being set   
• High energy bills indicating excess run-time to fully defrost
• Warm areas detected behind removable freezer panels
• Risk of frost and condensation dripping onto stored items

Replacing your malfunctioning heater ensures even temperatures throughout. This genuine Bosch part restores frost-free convenience and maintains cooling efficiency. It is compatible with some Thermador, Gaggenau, and Kenmore models.

This is an electrical on/off switch used to control power to an appliance circuit. It replaces a failed switch so controls respond normally and the appliance can be powered on and off safely. What it does

• Opens and closes an electrical circuit to enable or disable appliance power or a specific control function
• Commonly replaces a worn, stuck, or unresponsive switch that prevents controls or lights from operating
• Can resolve symptoms like no power to a control, intermittent operation, or a button that won't actuate
• Designed to mate with the appliance's existing wiring and mounting points

• One electrical on/off switch

• Disconnect power to the appliance at the breaker or unplug before working on wiring
• Verify proper wire locations and secure all terminal connections; replace only with the exact part specified by the manufacturer
• Handle the part carefully to avoid bending terminals or damaging the switch actuator

This replacement rack rail guides a dishwasher rack so it slides smoothly and stays aligned during loading and washing. Restores proper rack movement for easier loading and reliable rack support. What it does:

• Guides and supports a dishwasher rack so it slides in and out smoothly
• Keeps the rack aligned to prevent tipping or binding when moving
• Replaces worn or damaged rails that cause noisy or uneven rack movement
• Helps prevent rack from coming off its track during loading or unloading

• Disconnect power and water supply to the appliance before starting any repairs
• Typically installs to the rack assembly with simple fasteners or clips; follow your model's service instructions
• Inspect matching clips, rollers, or guides and replace if worn to ensure proper function
• Test rack movement after installation to ensure smooth operation

This fixture is the OEM mounting bracket used to secure internal components inside the appliance, keeping assemblies aligned and stable for reliable operation. It replaces a broken or worn bracket to restore proper fit and reduce movement. What it does

• Secures and positions internal parts to prevent shifting or rattling during operation
• Restores proper alignment of assemblies that rely on the bracket for support
• Can help stop intermittent noises or misfeeds caused by a loose or broken mount
• Protects adjacent components by holding parts in the correct location

• One fixture (mounting bracket) as shown

• Always disconnect power and water before starting repairs
• Typical installation requires basic hand tools; avoid overtightening plastic fasteners
• If damaged surrounding fittings are present, inspect and replace them to ensure a secure fit