T24if800sp Parts

Removes impurities from your refrigerator's water and ice supply. Replace every 6 months for clean, fresh-tasting water. Verify fit by model number.

Secures freezer baskets to drawer rails in your refrigerator. Replace if clip is cracked, broken, or missing to keep bins properly mounted and stable.

This halogen light bulb restores bright, reliable illumination in your appliance so you can clearly see the cooking area or interior. Replace a burned-out or flickering bulb to maintain visibility and safe operation. What it does:

• Provides illumination inside the appliance or over the cooking surface
• Replaces a failed halogen lamp to restore proper lighting
• Typical symptoms: light won't turn on, is dim or flickers, or works intermittently
• Helps you monitor food and check progress without guesswork

• 1 halogen lamp

• Disconnect power/unplug and allow the bulb and surrounding area to cool completely before service
• Access the lamp per your model's instructions; remove any lens or cover carefully
• Handle the new halogen bulb with gloves or a clean cloth; avoid touching the glass capsule
• Match the bulb type and rating specified for your model; do not exceed the rated wattage

This sensor monitors operating conditions inside the appliance and reports to the control so cycles run correctly and safely. When the sensor fails, the control may receive inaccurate feedback, leading to irregular performance. What it does:

• Detects key conditions inside the appliance and sends a signal to the control
• Helps the control regulate heat and cycle progress
• Failure symptoms can include erratic cycle times, poor heating performance, or sensor-related error messages
• Can prevent the appliance from starting or completing a cycle if readings are out of range

• 1 sensor

• Disconnect power before servicing; shut off water supply if applicable
• Access the sensor and note wire orientation before removal
• Ensure any sealing surface is clean and the sensor is seated properly; check for leaks after reassembly where applicable
• Run a diagnostic or test cycle after installation to clear errors and verify operation

The Motor-Fan is an OEM component specifically designed for Bosch refrigerators. It circulates air to optimize internal temperatures.

The motor-fan works continuously to push cool air from the freezer compartment and direct airflow throughout refrigerator shelves and bins. Strategically positioned vents help regulate temperature variances. 

Symptoms of a bad motor-fan include:  

• Inconsistent or fluctuating temps from section to section
• Frost or condensation building up unusually fast 
• Abnormal sounds like grinding or squealing during the operation
• Complete lack of airflow

Causes can be a failed motor bearing, compromised fan blades off balance, or blockage preventing free rotation.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore refrigerator models.
 

Leveling foot installs at the refrigerator base to support and level the unit. Replace if worn, cracked, broken, or missing to restore stability.

Restores proper door alignment and smooth operation. Replace if your refrigerator door sags, drags, or has uneven gaps. Verify fit with your model number.

Mounting hardware kit secures refrigerator components in place. Replaces worn, missing, or damaged fasteners that cause rattling or loose parts inside unit.

This Resistor-PTC is a temperature-sensitive resistor used in appliance control circuits to help regulate temperature-related functions and protect components. Replacing a failing PTC restores reliable temperature sensing and control behavior. What it does:

• Acts as a PTC (positive temperature coefficient) thermistor in the control circuit to change resistance as temperature rises
• Helps the appliance detect or limit temperature for safe operation
• A failing resistor can cause incorrect temperature readings, control errors, or heating-related faults
• Common symptom linkage: appliance may show heating faults, erratic temperature behavior, or generate control board error codes

• Recommended for experienced DIYers;
• Always disconnect power (unplug or shut off breaker) before accessing internal components
• Handle circuit-board-mounted parts carefully to avoid damage from static discharge or bending

The Water Valve is an OEM part for Bosch refrigerators. It regulates the flow of water into the ice maker and water dispenser.

The water valve allows water to fill the ice maker bucket or flow through the dispenser chute on demand. It controls water pressure and assists in proper ice formation.
Over time, mineral buildup can affect a water valve's ability to open and close smoothly. 

Symptoms of a bad water valve include:

• Slow or inadequate water flow from the dispenser
• Ice maker not filling or producing ice fully
• Water leaking inside refrigerator compartments
• No water dispensing when button is pressed

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

If your freezer isn't maintaining proper temperature or runs constantly, the temperature sensor may have failed. This sensor monitors interior temps.

This is a replacement dryer complete assembly designed to restore drying function and structure for compatible Bosch laundry units. It provides the main cabinet and drum enclosure needed for normal tumbling and airflow. What it does

• Houses the drum and internal components so clothes can tumble during the drying cycle
• Provides the enclosure and mounting points for the blower, heating system, and controls
• Restores proper airflow pathways to help the dryer heat and vent as intended
• Helps eliminate issues caused by damaged or severely warped cabinet or drum housings

• One complete dryer assembly as shown

• Disconnect power before servicing
• Follow factory service manual for alignment, seal, and vent reconnection steps
• Inspect and replace any worn seals, ducts, or mounting hardware as needed during installation

Fix unresponsive controls and cycle issues with this freezer electronic control board. Restores proper temperature management and defrost sequencing.

Restores smooth winding and secure routing for internal cables or hoses. Replace if cable snags, rubs, or routes loosely. Confirm fit with your model number.

Replaces a missing, worn, or broken control panel push button on your refrigerator. Restores clean, reliable activation of panel functions.

The Housing is an OEM part for Bosch refrigerator and freezers. This part encases the water filter, ensuring it is securely positioned within the appliance to effectively filter out contaminants from the water supply. 

The need for replacing the Housing can arise from physical damage, such as cracks or breaks, which can occur from accidental impacts during filter changes or general wear and tear over time. 

Symptoms of a compromised Housing include:

• Leaks or dripping water near the filter area, indicating that the housing may be cracked or not sealing properly.
• Difficulty in installing or removing the water filter, which could suggest that the housing is damaged or warped.
• Unfiltered water taste or odor, hinting at an improperly seated filter due to a faulty housing.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.