T36bb810ss/65 Parts

This is a replacement dryer complete assembly designed to restore drying function and structure for compatible Bosch laundry units. It provides the main cabinet and drum enclosure needed for normal tumbling and airflow. What it does

• Houses the drum and internal components so clothes can tumble during the drying cycle
• Provides the enclosure and mounting points for the blower, heating system, and controls
• Restores proper airflow pathways to help the dryer heat and vent as intended
• Helps eliminate issues caused by damaged or severely warped cabinet or drum housings

• One complete dryer assembly as shown

• Disconnect power before servicing
• Follow factory service manual for alignment, seal, and vent reconnection steps
• Inspect and replace any worn seals, ducts, or mounting hardware as needed during installation

This factory repair set provides the factory-specified components needed to restore proper operation of compatible Bosch appliances. It replaces worn or damaged service parts so the appliance can perform as intended. What it does

• Replaces the original service components supplied in the repair set to restore normal function.
• Helps stop symptoms caused by worn parts, such as loose fittings, intermittent operation, or minor leaks when those parts are affected.
• Restores proper alignment or mounting where included components secure moving parts.
• Useful when troubleshooting issues traced to the specific assembly the kit services.

• Disconnect power and, if applicable, water supply before beginning any repair.
• Follow the manufacturer's service instructions and use only the supplied components.
• Inspect surrounding parts for wear; replace additional damaged components as needed.

This halogen oven light bulb replaces the interior lamp so you can clearly see inside your oven for cooking and cleaning. It restores oven illumination when the light is burnt out or dim. What it does

• Provides interior oven illumination for checking food and oven cavity condition
• Replaces a burned-out or flickering oven lamp
• Restores consistent brightness for safer monitoring of cooking progress
• Fits in compatible oven lamp sockets designed for halogen bulbs

• One halogen oven light bulb

• Turn power to the appliance off and allow the oven and old bulb to cool completely before replacing
• Use a cloth or gloves when handling the bulb to avoid skin oils on the glass, which can shorten bulb life
• Push or twist the bulb into the socket as required by your oven's lamp holder; do not force

This fixture is a small mounting bracket that secures internal dishwasher components to the tub, helping maintain proper alignment and reduce vibration. Replaces worn or broken brackets to restore stable operation and prevent rattling or misalignment. What it does:

• Secures internal parts and assemblies to the dishwasher tub or frame
• Keeps components aligned to prevent rubbing, noise, or premature wear
• Helps maintain proper clearance for moving parts like racks or spray arms
• Can prevent intermittent contact that might cause rattles or vibration

• Disconnect power and water supply before starting any service
• Inspect surrounding clips and fasteners; replace any damaged hardware for a secure fit
• Typically installs with basic hand tools; follow OEM instructions for correct placement

This glass turntable plate replaces a cracked or missing rotating tray to restore even cooking and safe food support. Durable tempered glass designed to sit on the microwave turntable support ring. What it does

• Provides a stable surface for plates and bowls during microwave cooking
• Helps promote even heating by rotating food while cooking
• Replaces chipped, cracked, or broken turntable glass that may rattle or not rotate properly
• Fits onto the turntable support/roller ring and spins with the drive coupling

• Handle with care; tempered glass can shatter if dropped or struck
• Ensure the turntable support ring and drive coupling are aligned and clean before installing
• Do not use if plate is cracked; replace immediately to avoid injury or damage

This insulating part is a factory replacement insulation panel that helps limit heat transfer and dampen noise inside the appliance cabinet for reliable operation and quieter cycles. Use it to restore proper thermal/sound control after damage or removal. What it does

• Replaces worn, torn, or missing insulation to reduce heat loss and help maintain internal temperatures.
• Dampens operational noise from motors and pumps for quieter appliance cycles.
• Protects surrounding components from direct heat exposure.
• Helps the appliance reach and hold proper operating conditions more efficiently.

• One insulating panel as shown.

• Inspect surrounding clips and fasteners; replace any that are damaged before installing the new panel.
• Position the panel carefully to avoid compressing or folding the insulation; secure per original mounting points.
• Disconnect power before accessing the appliance interior and follow all safety precautions.
• If adhesive was used on the original, use heat- and appliance-rated adhesive or fasteners as specified by the manufacturer.

This rail guides a dishwasher rack so it slides smoothly in and out, restoring proper rack alignment and reducing jams. It's a direct-fit replacement when an original rail is bent, worn, or broken. What it does

• Guides the rack on its rollers to keep it level and aligned during loading and unloading
• Prevents the rack from binding or derailing while extending or retracting
• Helps restore smooth rack movement if the original rail is bent, cracked, or worn
• Works with the rack rollers and end stops to maintain safe, consistent operation

• One replacement rail

• Basic tools are usually all that's required; verify rail orientation before removing the old part
• Remove the affected rack and rollers as needed to access and replace the rail
• Inspect rollers and end stops while servicing; replace any damaged components for best results
• Disconnect power to the appliance before performing any service that exposes wiring or electrical components

This replacement control panel push button restores a missing, worn, or broken button on compatible Bosch appliance control panels. It gives a clean, user-friendly surface for reliably activating the associated function. What it does

• Replaces a damaged or missing control panel push button so the corresponding command can be selected.
• Restores a crisp tactile feel for a more reliable button press.
• Helps resolve symptoms like a loose, cracked, jammed, or visually missing button.
• Matches the original form for proper fit and operation when installed correctly.

• One replacement control panel push button.

• Disconnect power to the appliance before starting any work.
• Typically snap-fits or slides into the front control panel; use a non-marring pry tool if needed.
• Remove gently to avoid damaging the control panel or surrounding buttons; note orientation for reinstallation.

This water inlet valve controls water flow into the appliance, restoring proper fill and preventing unwanted leaks. Replacing a faulty inlet valve returns normal water supply and helps the appliance fill reliably. What it does:

• Opens and closes the water supply to the appliance when a cycle calls for water
• Stops water flow when the fill is complete to prevent overfilling
• Common symptom: appliance won't fill or fills slowly
• Common symptom: continuous or intermittent leaking near the inlet area
• Works with the appliance's control signals to regulate fill volume

• Disconnect power and shut off the water supply before starting any repair
• Drain residual water from hoses and fittings to avoid spills
• Inspect and replace any worn inlet hoses or seals when replacing the valve

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation

A small replacement retaining pin that secures moving parts and keeps assemblies aligned for proper operation. Use this OEM-style pin to restore secure fit where a worn or missing pin causes loose or misaligned components. What it does

• Secures hinges, levers or other small appliance linkages to prevent unintended movement
• Restores alignment for doors, panels or internal linkages
• Helps eliminate rattling, slipping or loose connections caused by a missing or worn pin
• Simple, passive fastener — no electrical or mechanical adjustments required

• One replacement pin

• High-level task: typically pushed or tapped into a locator hole; may require basic hand tools (pliers, punch, hammer)
• Use proper eye protection when tapping or driving pins
• Verify alignment of mating parts before final seating to avoid binding
• If the original pin is corroded or sheared, remove all debris before installing the new pin