T36ib800sp/50 Parts

This fixture is a small mounting clamp that secures internal components in place to keep them aligned and stable during normal appliance operation. It helps reduce movement and vibration for a quieter, more reliable appliance. What it does:

• Holds internal assemblies or wiring harnesses securely to prevent shifting
• Keeps parts properly positioned to maintain function and reduce wear
• Helps reduce rattling or vibration caused by loose components
• Supports safe, consistent operation by keeping components from contacting other parts

• Disconnect power and water supply before accessing internal components
• Basic hand tools may be required to remove panels and fasten the fixture
• Inspect surrounding clips and fasteners; replace any that are damaged

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation

A small replacement retaining pin that secures moving parts and keeps assemblies aligned for proper operation. Use this OEM-style pin to restore secure fit where a worn or missing pin causes loose or misaligned components. What it does

• Secures hinges, levers or other small appliance linkages to prevent unintended movement
• Restores alignment for doors, panels or internal linkages
• Helps eliminate rattling, slipping or loose connections caused by a missing or worn pin
• Simple, passive fastener — no electrical or mechanical adjustments required

• One replacement pin

• High-level task: typically pushed or tapped into a locator hole; may require basic hand tools (pliers, punch, hammer)
• Use proper eye protection when tapping or driving pins
• Verify alignment of mating parts before final seating to avoid binding
• If the original pin is corroded or sheared, remove all debris before installing the new pin

This insulating part is a direct-replacement insulation pad that restores the appliance's thermal protection and helps reduce heat transfer and noise. Use it to replace a worn, damaged, or missing insulation element. What it does:

• Provides thermal insulation to limit heat transfer to adjacent components and cabinet surfaces
• Dampens vibration and helps reduce operational noise
• Protects wiring and nearby components from excessive heat exposure
• Addresses symptoms such as visible torn/missing insulation, heat feeling on exterior panels, or increased noise

• Disconnect power (unplug or switch off breaker) and allow the appliance to cool before starting.
• Handle gently—insulation can be fragile; reattach using existing clips or fasteners as OEM specifies.
• Use basic hand tools; follow OEM placement and orientation for proper coverage.

This replacement rail supports a dishwasher rack and restores smooth, stable sliding for loading and unloading. It helps keep the rack aligned so dishes move in and out without catching or tilting. What it does:

• Provides a smooth track for the dishwasher rack to roll on
• Keeps the rack properly aligned to prevent binding or tipping
• Reduces noise and rough movement caused by a worn or damaged rail
• Replaces cracked, bent, or broken rails that stop the rack from sliding

• One replacement rail

• Disconnect power and water to the appliance before starting any repair
• Remove the affected rack before replacing the rail to access mounting points
• Inspect mounting clips or rollers and replace any that are damaged for proper fit
• Handle edges carefully and reassemble components securely; test rack movement after installation

This defrost heater warms the evaporator coil to melt frost and ice buildup so the refrigerator can maintain proper airflow and cooling performance. Replaces a failed heater to restore normal automatic defrost cycles. What it does:

• Generates heat at the evaporator during defrost cycles to remove accumulated frost and ice
• Helps restore airflow and consistent cooling when the evaporator is ice-covered
• Commonly replaced for symptoms like excessive frost/ice buildup, poor cooling, or frequent defrost cycling
• Works with the freezer's defrost control and thermostat to operate only during defrost events

• Disconnect power to the appliance before servicing to avoid electrical shock
• Verify the evaporator assembly and defrost thermostat/timer are accessible and in good condition before installation
• Handle the heater and evaporator fins carefully to avoid damage; replace any damaged clips or insulation as needed

This is an inner door gasket that seals the dishwasher door to help prevent leaks and keep the wash chamber watertight. It replaces a worn, cracked or torn door seal to restore a proper door closure. What it does:

• Forms a watertight seal between the dishwasher door and tub to reduce leaks during cycles
• Prevents water spray and moisture from escaping the wash chamber
• Cushions door closure and helps maintain proper door alignment
• Helps reduce odors by sealing the wash area from outside air

• One inner door seal (gasket) as shown

• Disconnect power and water to the appliance before beginning any repair
• Remove the outer door panel or access trim as required to access the seal
• Inspect the door channel for debris or damage and seat the new gasket evenly into the channel, working around the entire perimeter

This fixture is the OEM replacement mounting piece designed to secure internal components and restore proper alignment and support. It helps keep parts stable for reliable operation and reduces noise caused by loose hardware. What it does:

• Secures internal panels or components to the appliance frame to prevent movement
• Restores proper alignment to reduce rubbing, vibration, or rattling noises
• Provides the correct mounting point for linked components to operate as intended
• Replaces damaged or missing fixtures that can cause part instability or failure

• Recommended for users comfortable with basic disassembly; unplug the appliance before starting.
• Keep fasteners and surrounding parts organized during removal to ensure correct reassembly.
• Inspect mating surfaces for damage or wear; replace adjacent hardware if needed.

This profile stripe is a replacement door trim strip that restores the finished look of the appliance and protects the door edge from chips and wear. It's a direct-fit exterior trim designed to match the original appearance. What it does

• Replaces a worn, cracked, missing, or scratched door trim stripe to restore cosmetic appearance
• Covers the junction between door panels and provides a finished edge
• Helps protect the door edge from everyday dings and moisture at the seam
• Restores proper fit and alignment of visible trim for a factory look

• Use basic hand tools; remove power to the appliance and follow OEM instructions before starting
• Handle trim carefully to avoid marring the finish; clip or adhesive locations may be fragile
• If adhesive is used, allow proper cure time per adhesive manufacturer instructions

This is an electrical on/off switch used to control power to an appliance circuit. It replaces a failed switch so controls respond normally and the appliance can be powered on and off safely. What it does

• Opens and closes an electrical circuit to enable or disable appliance power or a specific control function
• Commonly replaces a worn, stuck, or unresponsive switch that prevents controls or lights from operating
• Can resolve symptoms like no power to a control, intermittent operation, or a button that won't actuate
• Designed to mate with the appliance's existing wiring and mounting points

• One electrical on/off switch

• Disconnect power to the appliance at the breaker or unplug before working on wiring
• Verify proper wire locations and secure all terminal connections; replace only with the exact part specified by the manufacturer
• Handle the part carefully to avoid bending terminals or damaging the switch actuator

This small replacement clip secures a hose, wire or small appliance assembly so parts stay in place and operate reliably. It restores proper routing and prevents rubbing or disconnection that can cause noise or leaks. What it does:

• Holds hoses, wiring or small components in the correct position to prevent chafing or strain
• Keeps parts seated during normal use and vibration
• Helps maintain proper flow paths and clearances to avoid interference
• Reduces rattling or movement that can lead to wear or disconnection

• One replacement clip

• Designed for straightforward snap-in replacement; no special tools typically required
• Power off and disconnect the appliance before starting any repair
• Verify orientation and fit before fully seating the clip to avoid damage
• If the original clip is brittle or broken, inspect adjacent parts for wear and replace as needed