Tb225 Parts

Hex bolt secures blade adapter and other components on lawn mowers. Replace if bolt is stripped, damaged, or missing to properly fasten parts.

Replace a broken torsion spring causing handle slack or engagement issues on your lawn mower. Common DIY repair restores proper tension and operation.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Attaches to the back of your walk-behind mower deck to prevent grass and debris from reaching the operator. Replace if cracked, broken, or missing.

Hinge pin fastener for lawn mowers. Secures moving components and panels. Replace if bent, missing, or damaged to restore proper attachment and function.

Replace your lawn mower's side discharge chute if it's cracked, broken, or missing. Attaches to the side of the mower to direct grass clippings away.

The front-drive wheels are attached to the axle with a ring gear and a left-hand smaller gear inside. The wheels are responsible for keeping the mower deck from touching the ground and keeping the blade at a good height for safe operation. They also provide easy maneuvering of the lawnmower. The black and white finish offers a clean, classic look. Although wheels don’t typically wear down enough to need to be replaced, they can become damaged over time. If the wheels are broken or missing, this replacement from the manufacturer can get a lawn mower rolling again in no time at all. Although it’s not required, it is suggested to replace wheels in pairs to ensure even wear over the lifespan of the mower. The front-drive wheel is compatible with several MTD and Troy-Bilt lawnmowers that require front drive wheels. This wheel is typically for self-propelled models. This item is sold as a single unit and additional wheels will have tobe purchased separately. These sturdy plastic wheels are direct from the manufacturer and made to their exact standards to guarantee proper performance and fit with every compatible model.

Secures the spool to your trimmer head and releases line when tapped. Replace if cracked, broken, worn, or won't hold the spool properly anymore.

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

Carriage screw that secures various components on lawn mowers and snowblowers. Replace if your screw is stripped, loose, missing, or damaged during use.

Grass catcher frame that holds the grass-catching bag on walk-behind mowers. Replace if bent, cracked, or broken. Bag sold separately.

This is a shoulder screw that is used to secure the handles of yard equipment. Typically, this screw is used with a matching wing nut, which is sold separately. Many different varieties of push lawn mowers have handles that fold downward for ease of storage. This is one of the locations on a mower where one will find shoulder bolts and the point at which these bolts are most likely wear out. While they are made of durable machined metal, shoulder bolts receive a great deal of wear, particularly from the handles being raised and lowered each time the mower is used. When pushing down on the mower to clear wet grass clippings or to make sharp turns with the mower, the entire weight of the mower is put on the two shoulder screws where they intersect. Since the metal of the handles can turn at that juncture, extra shearing action is put on the shoulder bolts, which can wear out. It is actually advantageous that the bolts wear out since otherwise, the handles themselves would warp and break apart. These OEM genuine replacement parts fit a number of different lawn and garden machines, including many made by Cub Cadets, Husky, Troy-Bilt, Craftsman, Yard-Man, Bolens, MTD, and Yard-Machines.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when the screw is driven into the material. This type of screw also creates a firmer grip. This screw can also be used to secure a newly installed front cover or grill. This part is available as an individual replacement part. It is a genuine OEM part for use with specific models of snow throwers, lawn tractors, electric mowers, chippers, and log splitters from Bolens, Cub Cadet, Craftsman, Poulan, Ryobi, Toro, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

Compression spring for walk-behind mowers. Returns components to original position and absorbs energy. Replace if broken, worn, or missing.

Inner spool reel for line trimmers. Holds and winds trimmer string inside the trimmer head. Replace if cracked, broken, or worn from use.

Secures the chute deflector on your walk-behind mower. Replace this bracket if cracked, broken, or missing to properly mount the deflector guard.