Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Udt165sivii Parts

Queeze Clamp (Small)
Genuine Ge part
By: Ge
Part Number: WD01X24620

A small squeeze-style clamp used to secure thin appliance tubing and help prevent leaks by holding water or drain lines in place. Simple, compact design for tight spaces where a low-profile clamp is needed. What it does:

  • Pinches and holds small-diameter tubing to keep lines secure and reduce slipping
  • Helps stop drips or leaks caused by loose or improperly seated tubing
  • Works in tight spaces where larger clamps won't fit
  • Commonly used on water, drain, and ice-maker lines in refrigerators and other appliances
What's included: One small Queeze clamp Install notes:
  • Disconnect power and shut off water supply before servicing the appliance
  • Slide clamp over tubing and pinch/compress per OEM guidance until tubing is held firmly
  • Inspect connections after restoring power/water and run appliance to check for leaks
  • Replace with identical clamp size if tubing or fittings are damaged

More
$10.06

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Control Box Back
Genuine Ge part
By: Ge
Part Number: WD01X24633

 

More
$60.96

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Control Box Front
Genuine Ge part
By: Ge
Part Number: WD01X24635

 

More
$59.35

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Door Insulation
Genuine Ge part
By: Ge
Part Number: WD01X24642

 

More
$14.90

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Wash Pump Hanger (Pump Support Bracket)
Genuine Ge part
By: Ge
Part Number: WD01X24707

This wash pump hanger is the replacement bracket that secures the dishwasher wash pump/motor assembly to the tub, keeping the pump aligned for reliable draining and quiet operation. Restores proper support and fit after a damaged or broken hanger. What it does:

  • Holds the wash pump/motor assembly in place to maintain correct alignment and position
  • Helps prevent pump movement that can cause vibration or increased noise during a cycle
  • Reduces the risk of leaks by keeping the pump sealed and properly seated
  • Can address symptoms such as unusual pump noise, intermittent drainage issues, or a loose-feeling pump assembly
What's included: One wash pump hanger Install notes:
  • Disconnect power to the appliance before any service
  • Support the pump assembly before removing the old hanger to avoid stress on hoses and seals
  • Inspect surrounding seals, gaskets and fasteners during replacement and replace if damaged

More
$9.88

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Squeeze Clamp (Large)
Genuine Ge part
By: Ge
Part Number: WD01X24723

A large squeeze clamp that secures flexible appliance hoses and tubing to barbed fittings, helping maintain a tight connection and reduce leaks. Durable, simple design for reliable hose retention on water and drain lines. What it does

  • Compresses around hose to lock it onto a barb or spud, preventing pull-off.
  • Helps reduce leaks at hose connections caused by loose or damaged fittings.
  • Commonly used on water and drain hoses where a strong, compact clamp is needed.
  • Simple pinch-to-install action for a low-profile hold without screws.
What's included One large squeeze clamp. Install notes
  • Use pliers to compress the clamp fully until it seats; ensure the hose is properly positioned on the fitting first.
  • Inspect hose and fitting for damage; replace hose if cracked or brittle before clamping.
  • Avoid reusing a clamp that is distorted or corroded; replace if it does not hold securely.
  • Disconnect power and water supply when working near electrical components or active plumbing.

More
$12.12

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Striker Mount
Genuine Ge part
By: Ge
Part Number: WD01X33211

 

More
$10.64

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Door Latch Striker
Genuine Ge part
By: Ge
Part Number: WD01X33212

 

More
$11.45

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Trim Kit
Genuine Ge part
By: Ge
Part Number: WD01X33218

 

More
$20.45

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Pulley
Genuine Ge part
By: Ge
Part Number: WD01X33219

 

More
$10.64

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Pulley And Adjustment Screw
Genuine Ge part
By: Ge
Part Number: WD01X33224

 

More
$13.55

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Leak Pan
Genuine Ge part
By: Ge
Part Number: WD01X33480

 

More
$17.75

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Ground Screw (Grounding Fastener)
Genuine Ge part
By: Ge
Part Number: WD02X24614

A small grounding screw that secures the appliance ground wire to the chassis, restoring a proper electrical ground connection and helping prevent electrical shock or arcing. Simple, direct replacement for the original ground screw. What it does

  • Secures the grounding conductor to the appliance frame for a reliable earth connection
  • Restores proper grounding when the original screw is missing, loose, or corroded
  • Helps prevent electrical faults, arcing, and nuisance tripping caused by poor chassis ground
  • Common symptom: appliance shows intermittent power issues, sparks, burning smell, or trips breakers
What's included
  • One ground screw as shown
Install notes
  • Disconnect power (unplug or switch off breaker) before inspecting or replacing grounding hardware
  • Use matching screw size and thread engagement; tighten securely but avoid over-torquing
  • Ensure the grounding surface is clean and free of paint or corrosion for a solid metal-to-metal contact

More
$10.06

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Water Inlet Nut (Valve Connection)
Genuine Ge part
By: Ge
Part Number: WD02X24709

This water inlet nut secures the water inlet valve connection to the appliance, helping maintain a leak-free seal and stable water supply. It's a simple replacement that restores a proper inlet connection. What it does:

  • Secures the water inlet tubing to the inlet valve to prevent leaks
  • Restores a tight, stable connection when original nut is cracked, stripped, or missing
  • Helps stop water seepage and dripping at the valve connection
  • Compatible with standard inlet valve fittings used on many GE appliances
What's included:
  • Water inlet nut
Install notes:
  • Disconnect power and turn off the water supply before starting any repair
  • Hand-thread first to avoid cross-threading, then snug with appropriate tool; do not overtighten
  • Inspect adjacent fittings and seals; replace damaged gaskets or tubing as needed

More
$10.06

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WD02X33199

 

More
$30.82

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Black Screw
Genuine Ge part
By: Ge
Part Number: WD02X33202

 

More
$10.64

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google