Vdsc3054bss Parts

This door latch secures the oven/door in the closed position so the appliance can operate safely and maintain temperature. It replaces a worn or broken latch to restore proper door closure and reliable oven use. What it does:

• Secures the oven door closed so the appliance can complete cooking cycles
• Stops the door from popping open or failing to stay latched
• Resolves issues where the oven won't start or complete cycles due to an unlatched door
• Replaces a damaged, bent, or broken latch that prevents proper closure

• Disconnect power (and gas if applicable) before starting any repair
• Handle door and any glass parts carefully; remove the oven door if needed for access
• Verify latch alignment and striker engagement when installing; adjust as required

This service kit contains replacement components used to restore proper function to a compatible Viking appliance. It bundles the small parts commonly replaced during a targeted repair to get your unit working reliably again. What it does:

• Replaces worn or damaged small components that can cause malfunctions
• Helps resolve common symptoms like intermittent operation, error indicators, or reduced performance
• Restores secure mechanical or electrical connections included in the kit
• Provides OEM-compatible parts to avoid using improvised fixes

• Disconnect power (and gas if applicable) before beginning any repair to avoid shock, fire, or injury
• Follow the appliance manufacturer's service instructions and use recommended tools
• After installation, verify safe operation and check for proper function

This replacement thermostat knob provides the user control for adjusting temperature settings on compatible Viking ranges and cooktops. It restores a secure, easy-grip control for precise heat selection and consistent operation. What it does:

• Replaces a worn, cracked, or missing thermostat/control knob to restore normal manual temperature adjustment
• Fits the thermostat/control shaft for a snug, slip-resistant fit when turning
• Helps prevent accidental setting changes with a defined detent/stop feel
• Restores a uniform appearance to the control panel when original knob is damaged

• One black thermostat knob

• Pull the old knob straight off the control shaft; push the new knob onto the splined shaft until fully seated
• Confirm correct orientation and that the knob's index lines up with the control markings
• Disconnect power or follow appliance-specific safety procedures before servicing controls

10 1ʺx 20ʺ x 77' roll

This surface burner grate supports cookware above the flame on a gas range or cooktop. Replacing a cracked or warped grate restores a stable, level cooking surface and proper pan-to-burner clearance for safer, consistent heating.

• Supports pots and pans over the burner at the correct cooking height
• Helps keep cookware level and stable during use
• Allows proper heat/flame circulation around the pan
• Common fix for: broken, cracked, chipped, or warped grates; rocking pans or unstable cookware

• Turn all burners off and allow the surface to cool completely before handling
• Lift off the old grate; clean the burner area of debris and residue
• Place the new grate so it seats flush and level; verify it does not rock
• Avoid dropping or sliding the grate to prevent damage to the grate or cooktop

This black fiberglass rope is a high-temperature sealing rope used to restore a tight seal on ovens, ranges, and other heated enclosures. It helps reduce heat loss and prevents smoke or odors from escaping around doors and openings. What it does:

• Provides a durable, heat-resistant seal where original rope/gasket has worn or frayed
• Helps contain oven/range heat for more even cooking and efficient operation
• Reduces smoke, burning smells, and drafts caused by gaps around doors or panels
• Commonly used around oven doors, broiler compartments, and other high-temp openings

• Handle with gloves to avoid skin irritation from fiberglass fibers
• Clean and dry the mating surfaces before installing the rope for best fit
• Trim to length and seat into the original channel or groove; follow OEM placement
• If the original used adhesive or clips, use the same type per the appliance manual; follow manufacturer instructions

This thermo-disc bracket secures the thermo-disc/thermal cutoff assembly so the temperature sensor stays properly positioned for reliable oven temperature sensing and safety. It's a direct-fit replacement bracket for affected VDSC assemblies. What it does

• Holds the thermo-disc or thermal cutoff in the correct position so it senses oven temperature accurately
• Keeps the sensing device stable to prevent false trips or intermittent temperature control
• Helps maintain proper operation of temperature-limiting safety components
• Can be replaced when bent, cracked, or corroded to restore secure mounting

• Disconnect power to the appliance before starting any repair
• Handle the thermo-disc/thermal cutoff carefully—avoid damaging the sensor element or leads
• Basic tools are typically required; alignment and secure mounting are important for correct sensing

This anti-tip device is the floor-mount bracket that secures a range or freestanding oven to help prevent tipping when the door is opened. It provides a simple safety anchor for stable operation. What it does:

• Anchors the appliance to the floor to reduce the risk of forward tipping
• Helps prevent the range from shifting when heavy cookware is on the open door
• Addresses symptoms such as an appliance that rocks, shifts, or feels unstable at the front
• Works as the anchor point used with the appliance's factory-installed rear bracket

• Follow the appliance manufacturer's instructions and use hardware appropriate for your floor type
• Pull the range clear and disconnect power before installing or adjusting the device
• Secure bracket to the floor or subfloor and engage the range's rear bracket per the OEM procedure
• The range is stable and that the anti-tip engages when the unit is pushed forward

This thermal bulb shield protects the oven temperature sensing bulb from spills, drips, and direct contact while allowing accurate temperature sensing for consistent cooking results. Fits behind the oven cavity where the sensor bulb is mounted. What it does:

• Covers and shields the oven temperature sensing bulb to prevent damage from food, utensils, or cleaning
• Helps maintain accurate temperature readings by protecting the sensor from direct contamination
• Reduces risk of bulb breakage that can cause oven temperature errors or require replacement
• Common symptom: oven temperature inaccurate or sensor exposed/physically damaged

• One thermal bulb shield

• Turn off power to the appliance and allow the oven to cool completely before servicing
• Handle the sensing bulb carefully; avoid direct contact or force on the bulb when installing the shield
• Use appropriate screws/fasteners retained from the original assembly; do not overtighten

This broil element is the upper oven heating element designed to produce intense infrared heat for broiling and browning. It restores high-heat broil performance so foods brown evenly and finish quickly. What it does:

• Heats from the top of the oven to brown, broil, and crisp food surfaces
• Replaces a damaged, open, or intermittently working broil element
• Helps restore even broiling when the oven's top heating is weak or uneven
• Works as part of the oven's broil system—does not include thermostats or control components

• One broil element, as shown

• Disconnect power to the appliance before servicing to avoid shock hazard
• Typically mounts inside the oven cavity and connects to two terminal leads; handle terminals gently
• Use proper replacement screws and gaskets where applicable; verify fit before final reassembly