Vgsc3676bss Parts

Light bulb socket assembly includes: Light bulb socket, light bulb and light lens.

This spark ignition switch mounts on the gas valve shaft and signals the ignition system when you turn the knob to Lite. Replacing a worn switch helps restore dependable burner lighting and can reduce nuisance clicking from a stuck switch. What it does

• Closes the circuit to the spark module when a burner knob is turned
• Triggers the igniter to spark so the burner lights
• May help resolve: no spark at a specific burner, intermittent ignition, or continuous clicking with knobs off (stuck/wet switch)
• Designed for use on the valve stem behind the control knob

• One spark ignition switch

• Disconnect electrical power; shut off gas if working near supply lines
• Pull off the knob and access the switch on the valve stem
• Transfer wires one at a time and match the original orientation
• Keep the area dry; test for proper spark before reassembly

This top burner front is a direct-fit replacement panel that restores the cooktop's front burner area for proper fit and appearance. It helps secure burner components and keeps the cook surface aligned and stable. What it does:

• Replaces a cracked, warped, dented or discolored top burner front panel
• Restores correct fit and support for front burners and grate alignment
• Helps prevent loose or misaligned burners that can affect cooking performance
• Improves appearance by replacing damaged or worn front trim

• Turn off power and gas to the appliance before servicing; follow all safety precautions
• Basic hand tools required; part installs from the top of the cooktop or under the cooktop depending on model
• Handle edges carefully to avoid cuts; check alignment and secure fasteners evenly

This infrared burner orifice directs gas to the infrared burner, helping the burner produce the correct flame for consistent searing and broiling. Use it to restore proper burner heat and performance. What it does:

• Controls gas flow to the infrared burner for correct flame size and heat output
• Helps restore even searing and broiling when the burner is underperforming
• Commonly replaced when the burner produces low heat, weak flame, or uneven cooking
• Fits into the burner assembly to ensure safe, consistent operation

• Turn off gas supply and power to the appliance before servicing
• Use appropriate wrench or orifice tool; avoid damaging threads or seat
• Check for gas leaks after installation and relight per manufacturer instructions

This listing is for a Viking oven bottom pan assembly. The oven bottom pan sits above the flames in the bottom section on specific models of Viking gas ovens. Their intended use is for stopping grease and other food byproducts from stoking the fire from the gas igniter. This model of Viking gas seems to have a few specific indicators that could signal a damaged bottom pan. There could be a possible gas smell coming from the oven and a sound of popping flames. This is because the pan is moving, allowing more gas fumes to exit the appliance. The flames popping are most likely from liquid spilling onto the igniter area. Always unplug the range from any electrical outlet and gas sources before beginning repairs. Wear gloves when working around the range area and look out for sharp edges.This is a genuine OEM part and is sourced individually from the original manufacturer. This part is compatible with Viking, KitchenAid, and Whirlpool appliances.

This toggle switch kit replaces a worn or damaged control toggle to restore reliable on/off control for the affected function. It's a direct-fit replacement designed to match the original switch's form and mounting. What it does

• Replaces a broken, loose, or non-responsive toggle switch that prevents proper control
• Restores reliable electrical contact and user control for the associated function
• Stops intermittent operation, arcing, or loss of control caused by a failed switch
• Useful when the toggle lever is bent, loose, or when internal contacts have failed

• Disconnect power (and gas if applicable) before beginning any service
• Access usually requires removing the control panel or console; keep track of screws and trim
• Verify electrical connections and orientation match the original before final assembly
• If wiring shows heat or corrosion damage, replace wiring

This white top burner knob replaces a cracked, faded, or missing control knob and restores safe, easy control of a cooktop burner. It provides a clean, finished look and reliable manual control for surface burners. What it does:

• Replaces a damaged or missing top burner control knob so you can manually adjust flame or heat settings.
• Helps eliminate slipping, hard-to-turn, or broken knob problems that prevent proper burner control.
• Restores proper fit and appearance for worn or discolored knobs.
• Works with the cooktop control stem to select low–high settings (valve operation remains controlled by the valve).

• One white top burner control knob

• Turn off the appliance and gas supply/power before servicing; allow surfaces to cool.
• Remove the old knob by pulling straight off the control stem; align the replacement on the stem and push straight on until seated.
• If the knob does not fit easily, do not force.
• After installation, restore power/gas and test each burner for correct function; follow local safety codes for any gas work.

This orifice hood (#54) is a replacement gas burner component that helps direct the flow of fuel to the burner assembly for proper combustion and consistent flame performance. It restores correct burner operation when the hood is damaged or missing. What it does:

• Centers and shields the orifice to ensure stable gas flow to the burner
• Helps maintain consistent ignition and flame pattern for the associated burner
• Common repair for chipped, bent or missing orifice housings that cause uneven flames or ignition issues
• Matches OEM shape and mounting to fit into the burner assembly as designed

• One orifice hood (#54)

• Install only with the appliance disconnected from the gas supply; follow local codes and manufacturer safety instructions
• Verify correct orifice/hood placement before re-connecting gas and testing ignition