Wcg49 Parts

Fix weak or uneven flames on your gas cooktop with a new burner orifice spud. Controls gas flow for proper combustion and consistent heat output.

Fixes uneven gas flow and burner performance issues. This manifold assembly routes gas to the correct valves, restoring proper distribution and operation.

This gas valve assembly controls the flow of gas to the appliance burner so the unit can ignite and heat reliably. It replaces a worn or failed gas control to restore normal burner operation and safe ignition response. What it does:

• Regulates gas flow to the burner(s) as commanded by the appliance controls
• Helps ensure reliable ignition and consistent heating performance
• Can cause no-heat or intermittent ignition when it fails
• A faulty valve may lead to burners that won't light or that stay off despite calls for heat

• Turn off gas supply and electrical power before servicing; verify both are off.
• Only install where gas appliance work is permitted; follow local codes.
• Check all fittings for leaks after installation using a non-corrosive leak solution or approved leak detector.

This gas valve controls the flow of natural or LP gas to the oven burner, restoring proper ignition and temperature control for gas ranges. It replaces a failed valve to help the oven heat reliably. What it does:

• Regulates gas flow to the oven burner so the oven can ignite and maintain temperature
• Common symptom: oven will not heat or burner won't light
• Can address intermittent ignition, weak flame, or continuous clicking without ignition
• Works as the main shutoff/control point between gas supply and the burner assembly

• Turn off gas supply and electrical power before starting
• Check all gas connections for leaks after installation using a leak-safe method
• Follow OEM installation instructions and local codes for safe operation

Burner won't light or won't turn off? This gas cooktop single valve controls gas flow to individual burners. Moderate DIY repair for most models.

The LP Conversion Kit is an OEM replacement part for Whirlpool cooktops. It allows you to convert your cooktop from natural gas to LP gas, ensuring compatibility with your available fuel source. It includes all the necessary parts and instructions to safely and effectively convert your cooktop.

Causes of needing a conversion kit include:

• Switching from natural gas to LP gas as the fuel source
• Moving to a new location with different gas supply requirements

By using this LP conversion kit, you can enjoy the versatility and convenience of using LP gas on your Whirlpool cooktop.
This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Cast iron grate kit for gas cooktops. Sits above burners to support cookware during cooking. Replace if grates are cracked, broken, or missing.

This spark module supplies the high-voltage pulses that ignite the surface burners on a gas cooktop or range. Replacing a failing module helps restore consistent clicking and spark so burners light promptly and reliably.

• Supplies high-voltage to up to five surface igniters (5+0 configuration)
• Sends spark when a burner control is turned to Lite
• Failure symptoms can include no spark on all or multiple burners
• May also cause intermittent/weak spark or continuous clicking

• Disconnect power and shut off gas before servicing
• Note wire locations; move one connector at a time to matching terminals
• Mount securely in the original position and ensure proper grounding
• After replacement, if only one burner won't ignite, inspect that burner's switch and igniter

Gas burner won't light? A faulty surface igniter stops the spark that ignites your cooktop burners. Direct replacement part restores ignition.

This burner cap replaces a damaged or missing cap on a sealed gas cooktop burner to help protect the burner head and shape the flame for even cooking. Fits the corresponding factory burner head and restores normal flame pattern. What it does:

• Sits on the sealed burner head to direct and stabilize the gas flame
• Protects the burner head from spills and debris that can affect operation
• Helps restore even heating when a cracked, warped, or missing cap causes poor flame shape
• Works with the factory burner assembly to maintain safe burner performance

• One burner cap

• Ensure the range is OFF and the surface and burner are cool before installing
• Lift off the old cap and seat the replacement flat on the burner head; no tools typically required
• Inspect burner ports for clogs and clean gently if needed before installing the new cap

If your gas burners won't light or click continuously without igniting, the spark electrode may need replacement. Simple repair restores ignition.

Replace a damaged or warped burner base causing uneven flames or poor heat distribution. Common fix for burners that won't sit level on your gas range.

Gas cooktop burner won't ignite or flames are uneven? The orifice spud secures the orifice to ensure proper gas flow to burners for stable flames.

Replacement control knob for gas cooktops. Restores secure grip and precise burner settings. Replaces worn, cracked, or missing knobs for easy use.

Two-piece grate kit for gas cooktops. Replaces cracked, broken, or missing grates. Restores stable cookware support and level surface for pots and pans.